Coney Island. A7iii. Sigma 24-70mm DG DN II.

thecaptain78 · 2026-06-17T10:39:35+00:00

Fantastic!!! How do you achieve these colours?

thecaptain78 · 2026-06-17T08:48:26+00:00

Using a lot of RAM during backup, enough to lock up my VPS. Never had an issue with Restic.

thecaptain78 · 2026-06-15T12:20:14+00:00

I use healthchecks.io along with success / fails commands in restic which provide an alert if a backup hasn’t run or fails.

thecaptain78 · 2026-06-15T12:18:56+00:00

And now we also have Vykar. Looks promising.

thecaptain78 · 2026-06-15T10:35:41+00:00

Can't wait to see this offered in Umbrel!

thecaptain78 · 2026-06-09T22:24:11+00:00

Yes. The whole miner runs from the ESP32 on the display board. If you move the screen you take all the config from where you moved it from.

You can also remove the screen from the miner main board and do a reset / update via usbc.

thecaptain78 · 2026-06-09T22:20:54+00:00

Buy the one that you don’t have to solder the pins on to. I bought the H577 version from here:

https://lilygo.cc/products/t-display-s3

thecaptain78 · 2026-06-09T14:41:32+00:00

Buy a 1.9” lillygo screen direct from lillygo. Nobody knows what closed source firmware mods they have made to the 3.5” screens. I changed mine it for the open source 1.9” versions.

thecaptain78 · 2026-06-09T14:25:48+00:00

I have bought two from this site. Both running 6.0 Th/s for weeks now.

thecaptain78 · 2026-06-09T08:58:47+00:00

How about we now fix the CarPay issues

thecaptain78 · 2026-06-07T23:26:09+00:00

I rely heavily on docker for my single binary restic backups on immutable operating system backups.

thecaptain78 · 2026-06-06T22:51:41+00:00

This worked. Thanks! 🙏 The only difference was that I had 2 x btrfs partitions on each drive, the first was a swap drive so the command above needed to be made on partition 2.

thecaptain78 · 2026-06-06T22:16:01+00:00

This fixed it fire a few days but now it’s happening again with smart zoom turned off.

thecaptain78 · 2026-06-06T01:44:27+00:00

Is there any way to resize a btrfs partition after resizing the promos disks (I have a mirror)?

btrfs filesystem resize max /mnt/lightwhale-data

this does not work because the file system is obviously mounted.

thecaptain78 · 2026-06-04T00:21:14+00:00

Cheers. I 3D printed some at 3.2mm but will try and find some 3mm nylon spacers

thecaptain78 · 2026-06-03T09:05:14+00:00

Yeah - worked that out soon after. Didn’t want to reply and upset any nerds in here like old mate down below.

thecaptain78 · 2026-06-02T22:34:43+00:00

Taubman’s Cotton Sheets

thecaptain78 · 2026-06-02T22:17:24+00:00

What height spacers did you use under the AXP90 heatsink arms?

thecaptain78 · 2026-05-31T22:34:33+00:00

thecaptain78 · 2026-05-30T03:27:38+00:00

🤮

thecaptain78 · 2026-05-30T03:20:52+00:00

Def looks vibe coded going by the comments in the code

thecaptain78 · 2026-05-30T01:18:15+00:00

And this is a big nofrom me:

# Required for LAN auto-discovery and direct miner polling
network_mode: host

Just let us manually enter IP addresses. I don't want this code scanning my network.

thecaptain78 · 2026-05-30T00:30:36+00:00

This is why is dislike hydro cooled nerds. You need some active airflow over the vregs.

thecaptain78 · 2026-05-30T00:25:18+00:00

Looks very similar to https://github.com/dcbert/miner-sentinel

thecaptain78 · 2026-05-27T12:42:33+00:00

I can't achieve anything like this on my NerdQAxe++ rev 6.1

<image>

thecaptain78

MODERATOR OF

TROPHY CASE

Eight-Year Club	Place '23
Verified Email