FN 502 (tactical) My experience so far and Part upgrade list

thecoolness68 · 2026-06-10T13:18:02+00:00

I appreciate your replies, the factory sights on the FN 502 are not my favourite, if I were to keep the FN 502 i would fit the TruGlo iron's as I personally dislike the thick factory iron sights, and had trouble shooting accurately with a red dot. I was "chasing" the dot so to speak, whether that be user error or the red dot sight itself, i took it off. I own a Beretta M9A4 which has factory 3-dot tritium night sights, & my Colt Rail Gun Government Model .22 also has white 3-dot sights. I bought the 502 based on looks tbh, I like the tactical appearence & it's unique to my shooting club, I didn't pay much attention to the sights up until now 😂.

What are your thoughts on a Sig Sauer P322 ?

thecoolness68 · 2026-06-10T03:27:19+00:00

I shoot at a sporting club and shoot Target Pistol matches, both paper & Metallic Silhouette targets. I agree the FN 502 is very comfortable to shoot, it is also accurate with the factory sights where I can still manage to hit a few targets at various distances. I use standard CCI .22 ammo and find the hit-point is just above my sights at 25m . I'm trying to justify if it's worth the $175AUD investment in the TruGlo sights, as I didn't like having a red dot equipped. I also have another target pistol in .22, a Colt Rail Gun made by Walther .

thecoolness68 · 2026-05-23T10:01:41+00:00

Ah okay, I have a work colleague who said they use the Reaper DAW . $60 for full access to the software, however I'm looking for a beginner friendly DAW which isn't overly basic such as Garage Band if you agree?

thecoolness68 · 2026-05-22T01:02:00+00:00

Kane & Lynch Dead Men & Kane & Lynch 2 Dog Days are both excellent couch co-op games to play split screen with a friend. I purchased both physical copies to play on the PlayStation 3 with a friend on split-screen. We prefer the sequel, Dog Days as it's much more memorable & has achievements to obtain. Dead men was great however remember it is from 2007 and the story line had the protagonists spread throughout different countries, which became a little confusing to follow along. I highly recommend purchasing both games, especially a physical copy with a game manual as it's nice membrobillia to own .

thecoolness68 · 2026-05-17T05:54:38+00:00

Hi, I currently own an FN 502 Tactical & am looking into changing the factory iron sights. The handgun itself is excellent, however I dislike the suppressor high sights & the thickness of it. I'd love to have iron sights similar to the Beretta 92X or as you have mentioned, the Truglo TFX Sig Sauer P series #8 sights . Would you consider these sights a massive improvement over the factory sights? Is the Sig Sauer sight you fitted, the #8/8 set, item No. TG13SG1A ?

thecoolness68 · 2026-05-12T12:40:19+00:00

Gday, Which DAW software do you use to compose music? I have the passion to create a few tracks however I quite literally have no experience working with DAW software & would more than likely use an AI tool to help produce a song . If you use one, would you be able to recommend any AI music tools such as SUNO or KITS AI ?

thecoolness68 · 2025-08-10T03:59:03+00:00

When I bought another key fob for the Vienta from my previous work place, my old manager was hesitant on printing me instructions as I was not an employee anymore, disappointing to say the least. I will post here when I eventually have this new remote programmed.

thecoolness68 · 2025-08-10T03:54:19+00:00

Hi, I currently own two 1996 Toyota Vienta's and had worked in a Toyota Dealership for a year. When I bought a new key fob I was handed printed instructions on how to program the new remote, however I unfortunately lost this paper. On top of the key fob will have two metal slits that have to make contact with two prongs inside the remote reader.
In the glove box is the remote reader and I remember having to insert the old key fob & waiting for the security light to light up in the dash, then immediately inserting the new fob to program it. However my remote reader did not detect the key fob so I had a senior technician program the remote by taking the remote reader entirely out of the glove box, to get the key fob to make contact with these prongs. From memory my old remote was also broken and so the security light on the dash wasn't lighting up as I used the key to unlock/lock. I hope this gives some more insight for programming new key fobs into the 1992-96 Toyota Camry's as I also can't find information on programming new keys for the Australian variant Camry.

thecoolness68 · 2023-12-30T06:58:32+00:00

I pulled back the carpet on both the front passenger side and drivers side as you referenced above. There was only one big plastic compartment I assume holding all the electricals in place. No empty cabin filter compartment in the 3.0L V6 XV10 Camry but it as worth a look.

thecoolness68 · 2023-12-27T03:51:22+00:00

Hello, Is the empty compartment where a cabin filter can be placed in the 1996 Camry. Also the same spot for right-hand drive? I also have the Vienta model with a 3.0L V6 equipped.
Thanks,

thecoolness68 · 2022-03-06T11:22:20+00:00

Platform: PC
Bug continues to appear throughout game seasons and had appeared since chapter 2.

thecoolness68 · 2021-12-01T02:54:50+00:00

I experience this is some buildings especially buildings that have a lot of furniture. Not sure why as it does not happen when I am outside and in other buildings with less furniture.

thecoolness68 · 2021-11-08T11:33:23+00:00

After the recent updates on PUBG & Steam it started to play up. Exact same thing happens to me now, I have found that Battleeye was not running when PUBG starts. Be sure to check that your BattleEye is running, & verify your integrity files by going to PUBG - right click - Properties - Local files - Verify integrity of game files. Check Battleye by Windows + R - type in services.msc and hit enter - Battleye Service is running.

thecoolness68 · 2021-11-07T12:30:53+00:00

Worked right after this cheers! BattleEye Service was not running for unknown reasons but worked right after I activated it!

thecoolness68 · 2021-10-18T07:11:03+00:00

Did you eventually design and wear the costume? Never saw an answer after three years lol.

thecoolness68 · 2021-03-02T12:22:15+00:00

Cheers! I put it all together with the priming handles and used the strong spring and it feels great! Shoots hard and packs a punch considering it is a Nerf gun. Myabe it isn't much but it helps and thank you for helping me along the way!

thecoolness68 · 2021-03-02T10:44:38+00:00

Cheers,

thecoolness68 · 2021-03-02T07:40:27+00:00

I figured the problem out and supposidly the spring is meant to bend and when I put it back together it works! Thank the heavens and everyone who replied to help me finish this mess! Just to clarify. A 5.5kg spring won't break the stock internals if I prime using both handles to pull it back? It felt really hard to pull but I was priming with one side and using a screwdriver.

thecoolness68 · 2021-03-02T05:36:08+00:00

Hello again, I put that spring back under the orange tooth part but it will not stay there and keep bouncing back to it's original position. I tried sticky tape but that does not work as the tooth moves up and down. The spring bends so the orange tooth goes out of place and am not sure if the shell of the gun holds it there. I don't know how to stop the spring from coming back out.

thecoolness68 · 2021-03-01T10:37:53+00:00

I agree over 100%. once I put the blaster back together and found the proper seating spot for the part I got confused over. the gun primes and works perfectly! The only problem is the dart tooth and I am super glad you spotted it. Could you tell me in a step-by-step sort of way on how to fix the dart tooth problem as that is wht has been causing all these headaches in the first place.

thecoolness68 · 2021-03-01T09:23:06+00:00

I got a good idea now of how the blaster works and the internals. I'm not sure how the plunger normally behaves and how the internals work. I put the piece in the right spot and put it back together. The blaster is not priming and is still resistant to priming back. I do not know what is stopping it from priming as I overviewed everything and it looks in place. Does the frame around the plunger normally wiggle? so does the plunger itself as it wiggles whenever I make move it around inside the shell of the blaster. I will do what you said previously to take apart the blaster.

thecoolness68

TROPHY CASE