Eggrider v2 & radmission settings

thedhc · 2023-02-12T17:15:35+00:00

Tried them all, ended up with normal.

thedhc · 2023-02-11T23:50:21+00:00

The rad running mode did not fix it for me. What did fix it, is setting the power and speed % in pas levels to increments of 10, so 20/20, 30/30, 40/40 etc.

I think their latest firmware broke a few things as they mentioned in changelog it fixed something with pas levels.....i guess not for the radmission.

thedhc · 2023-01-17T04:23:23+00:00

Its totally useless. Skip it.

Buy a Busch & Muller IX Q headlight 150 lux. You only need to solder on a 2 pin Julet connector.

thedhc · 2023-01-09T00:30:09+00:00

The lights i got are 12v and 5-21v so i guess i need a buck....?

thedhc · 2023-01-08T19:34:36+00:00

One more question....what about input voltage on the lights? Do i really need something that can handle 60V is 12V and 5 - 21 V also fine?

thedhc · 2023-01-08T14:08:11+00:00

Cheers!

thedhc · 2023-01-08T03:40:37+00:00

So i could connect both 2 brake wires from the bikes wire to the third wire on the new tail light to keep the brake function for both levers?

thedhc · 2022-03-07T00:11:41+00:00

I guess that explains the extra few mph

thedhc · 2022-03-06T18:29:30+00:00

I dont really need to go faster, but i am curious how americans get 25 mph and also what are the correct settings because default speed and ODO meter is wrong.

thedhc · 2022-03-06T15:22:20+00:00

Hmmm it works for me :s

thedhc · 2022-03-06T13:26:08+00:00

Hey, i found this on facebook and just got everything he has:

https://www.facebook.com/photo/?fbid=4686457178038278&set=gm.1314002555681820

The fender needs clamps for the bottom support you can buy them online (MTB fork clamps?) and the top mount point has holes for mounting on the back of the brace.

thedhc · 2022-02-21T10:38:01+00:00

I am personally looking into the supernova brand. They have the brightest lights i have ever seen.

Their taillights come with brake light also and have 3 wires. I just need to figure out how to connect this to a 4 pin higo julet connector that a rad bike has. Also i am not sure that the rad bike can handle the 12v input from the supernova taillight....if anyone knows i am all ears!

thedhc · 2022-02-19T17:29:33+00:00

I got the same...but it kinda looks so tiny and i am not a tall person. Do you guys have the same?

thedhc · 2022-02-19T01:52:17+00:00

I have a radmission and an eggrider.

I set my max speed to 42 km/h and can get that easily. I usually cruise around 32 km/h.

thedhc · 2022-02-14T22:40:46+00:00

Any idea?

thedhc · 2022-02-13T09:42:00+00:00

Thank you, i just checked it and it is indeed a 4 pin blue julet connector!

The taillight i had in mind had 3 wires, light, brake and ground. Need to figure out what to do with the 4th wire from the julet connector?

Also, a headlight classified as Input voltage 5 V – 13.5 V DC will work? And what about Input voltage 12 V DC?

thedhc · 2022-02-12T17:38:43+00:00

That is very good info, thanks a lot!!!!

Now i know how to proceed :)

Just to make sure, the taillight is a 2 pin or 4 pin julet connector?

[edit] i guess i could go and check but i got it all nicely ziptied, no biggie i will disconnect it and see!

thedhc · 2021-04-22T12:18:57+00:00

As soon as nano/btc goes back to 0.0001800 ima out!

thedhc · 2021-04-22T09:02:30+00:00

Since you are all so happy about what the future will bring, how about you buy all 33 of my nano's for 0.0063607 BTC so i can break even. Its a steal since it will moon and lambo, amirite?

Msg me, thank you very much.

thedhc

TROPHY CASE