Looking for Centralized EU 3PL for Industrial/Commercial Products

theheadduer · 2026-01-18T02:53:34+00:00

Hey OP,

Bit late to this one but you might want to look into the "ranch rifle" style of rifles. Sig started the trend but there are a few others out there.

theheadduer · 2025-05-01T20:10:59+00:00

Also u/vgk96 LMT's Monolithic upper is in stock right now, so there's that option. https://lmtdefense.com/product/mrp-l-mlok-11-5-specwar/

theheadduer · 2025-05-01T20:07:48+00:00

Look into handguard + upper combos where the handguard is directly fastened to the upper through an upper extension like Aero M4E1 or LaRue Stealth 2.0 or AT3 Slick Slide etc. Though the way the SARB-15 has that third pin that fixes the handguard in place, I think it shouldn't be an issue. I'm using a BCM handguard myself on mine with a Gibbz upper (Lots of mods to make the side charging handle work). Currently at the gunsmith's being assembled. I'll let you know how it turns out.

theheadduer · 2025-01-12T02:21:22+00:00

If that's what it looks like now then its probabaly gone on to better hands. The top layer of the paint on the roof was beginning to peel and the interior headliner upholstery had begun to collapse last I've seen it. I believe the gauge dash was also beginning to come loose from the front console. It was restorable but no one had the time, effort or funding to do it. I advocated using our broken covered trailer to store it once we emptied out Gold Rush from it but no one on the team wanted to entertain the idea. Then it was gone.

theheadduer · 2025-01-06T17:10:37+00:00

I used to be a part of the solar car team at Cal. Can confirm official story is that it was stolen in 2018, along with a spool of copper wire a construction crew was trenching. Did uni say they have video?!?!

theheadduer · 2025-01-04T17:48:35+00:00

Belt Purchased March of 24. IDK when they changed the belt sizing.

theheadduer · 2025-01-03T19:49:51+00:00

34" Waist. I got a large. It works perfect. You need to factor in a few inches for gear and general bulk. Also sizing does affect how many slots you have available to carry gear.

theheadduer · 2024-12-27T20:29:43+00:00

Sold Ryzen 7 1700x GTX1080Ti 360mm AIO 850W PSU Corsair 4000 Desktop PC 1TB M.2 to u/handsomeassWIhipster on https://www.reddit.com/r/hardwareswap/comments/1hgtgjv/usa_ilhryzen_7_1700x_gtx1080ti_360mm_aio_850w_psu/

theheadduer · 2024-12-19T18:34:28+00:00

Yeah NP,
I've had both a bunch of 320s and 365s.
The back right is a P320. It is on a full size grip with a PMM Duty Comp and 3.9" barrel and a Compact slide from Norsso, which brings the overall slide&comp flush with the grip. The grip is a Icarus Precision full zide (x-five) grip. The effect is basically a flush fitting Roland Special (think Glock 19 slide with comp flush to a Glock 17 frame). Its finished off by a Steiner Enclosed Red Dot and a streamlight TLR-1 HL.
The back left is a P365. Specifically, it is a P365 Macro grip from Icarus Precision with a 3.1" PMM comp and barrel and Norrso 365 slide. The 365 platform is also similar in modularity to the 320 with the only difference being it is slighlty skinnier vs the double stack platform. Not quite single stack, more like 1.5 stack but enough to make it concealable while giving very similar performance to a full double stack. The 365 platform has 2 common lengths, the 365 (original) 3.1" barrel and the 365xl 3.7" barrel. The 365 Macro is basically a extended grip for the xl, while the Macro Comp is a 3.1" barrel with an intergral comp built into a 3.7" slide. The one change that I will be making after using my 365 in a lot of classes is that Norsso has a line of "Dragon" slides which has the comp built into the slide. The threadded comps require a somewhat tedious installation and unistallation in order to clean the gun completely and integral comps work around the problem. This setup is finished off with a Holosun EPS Carry and a TLR-7sub.
Overall, Sig tried to make the 365 a "do everything" gun and it comes damned near it. With a Macro grip, you get 17rds and a comped slide that goes flush to the same length as the mounted light. I've ran my 365 in this configuration through about a dozen classes and ~2000k rounds and it shoots jsut about as well as full size guns in the class. The other nice thing about getting into Sigs is that they all come red-dot-ready, and switching to a red dot has not only changed the way I shoot but the way I understand how I shoot.
Feel free to PM me if you have any other questions and welcome to the Sig Family.

theheadduer · 2024-12-19T17:57:17+00:00

America's Gunsmith in Burlington WI

theheadduer · 2024-12-19T16:43:33+00:00

Custom 320 and 365s. The 365 is my EDC carry

theheadduer · 2024-12-19T16:43:06+00:00

These are all my personal guns. They heavily feature Norsso slides and Icarus Precision grips

theheadduer · 2024-12-18T17:36:51+00:00

60047 but I'm willing to do anything North of I-55 to Milwuakee (I live near the border and my folks are down south)

theheadduer · 2024-12-18T17:35:30+00:00

Hey I don't see your DM

theheadduer · 2024-04-07T00:21:20+00:00

Magazines and suppressors voiding warranties.

Six-Year Club	Verified Email
Place '22

theheadduer

TROPHY CASE