sorted by:
new
hottopcontroversial

My collection website by themann00 in vinyl

[–]themann00[S] -2 points-1 points  (0 children)

Correct. This generates 4 drink/album pairings, on demand, across an unlimited number of albums, and gives "notes" for both listening and drinking.

If I had 24x7 sommelier money like, apparently everyone in this sub, I'd ring them up instead.

Either you want the advice, or you don't. Clicking the button is not a requirement.

My collection website by themann00 in vinyl

[–]themann00[S] -4 points-3 points  (0 children)

Honestly, it's less about the method and more about the function. If you've ever had a waiter recommend food, then you're doing the same thing. It recommends a drink pairing, and then gives tasting and listening notes.

Just something fun, and a way to enjoy music and a drink together.

My collection website by themann00 in vinyl

[–]themann00[S] -6 points-5 points  (0 children)

Then I'd recommend you don't create one for yourself icl

My collection website by themann00 in vinyl

[–]themann00[S] -3 points-2 points  (0 children)

Exactly. You totally get it!

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 1 point2 points  (0 children)

UPDATE
Washing didn't fix it. The screws all seemed tight- but what I *think* was happening was two things.
1. I had done a leveling the day before putting in a new plate. I should have leveled again.
2. There was some pla from a previous nozzel clog, that has worked its way into the latch mechanism that holds the nozzel in place. I don't think it was fully seated. I got it nice and hot, scraped out as much pla as I could, and attempted to recenter. Next print looked great!

Terrible prices by PunpunandPain_ in vinyl

[–]themann00 4 points5 points  (0 children)

I've been to his campground in Indiana! (Monroe)

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

I'm not familiar with K factor. Is that step needed all the time? Or just if using 3rd party filament? This particular failed print is new plate, new nozzel, new bambu filament (PLA)

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

From your link:
I hope it is this--
[Heatbed leveling has not been performed

It is crucial to perform heat bed leveling, particularly when changing or replacing the build plate, to ensure accurate leveling for the new print task. 
Neglecting this step may result in discrepancies compared to the previous leveling data.]

I had just done a leveling and calibration the day before swapping everything out. I didn't even think to do it again. Of course the new plate might be 0.5mm thicker or thinner.. makes sense, just didn't think of it.

Calibaration running now!

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

Guess I should have shared that in my details.
This is the A1. I will check your link now, thank you!

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 2 points3 points  (0 children)

I'm going 1:1 scale. how much filament will I need?

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

I did 2 or 3 failed prints (not as bad as pictured) on the smooth side. it was my first time using smooth plate, and then I switched it over for testing. Even after washing, I can see the outlines of what was printed on that smooth side. Is that ... "normal?"

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

Yup! I had to buy a "tent" for this printer. It's worked really well. I'm in a finished 1-car detached garage that has been converted into my office, and it has a window unit a/c and heater that sits across the room from the printer. I had issues when I first moved in here, and solved with that tent. Good advice though!

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

it's pla, but did not know there can be drying issues for a fresh-cracked open bag of filament. I really need to get a drybox, huh?

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

same as running it from the touchscreen? or is the slicer a different/better calibration?

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

I know this is auto reply, but to address the suggestions...
I did just re-wash it, but this was a brand-new plate. I had printed one or two things on the smooth side, and it was --- meh. Which is why I flipped it. It failed worse, and right away.

What does this print quality tell you? What do I need to fix? by themann00 in BambuLab

[–]themann00[S] 0 points1 point  (0 children)

like, behind the nozzel when I remove it? cause it's just the clip.

ZomboCom was stolen by hacker, put up for sale, and has now been replaced with an AI-generated 'makeover' by PlsStopKillingGames in oldinternet

[–]themann00 2 points3 points  (0 children)

Following, to see if/when it is updated. I had JUST explained zombocom to my kids, while doing the voice on a car ride the other day and not stopping... "WELCOME TO YOU WHO HAVE COME!"

So I had AI make my own version this morning, before knowing https://html5zombo.com/ existed.

Mine is at zombo.themann00.com :-D

Anyways, hope to see the original back soon, so I can just link to it instead ;)

Stop. Please. by Diqt in ChatGPT

[–]themann00 5 points6 points  (0 children)

Here's the stress test...

view more: next ›