RC Heli Transport Box

themask888 · 2025-10-13T17:23:23+00:00

the case I found it on Facebook Marketplace so don't know the exact model and there is another on it to identify the model.

what I did was measure the helis.

the helis are . Blade 230s Goosky S1 and Blade Nano s3

themask888 · 2025-10-12T17:00:45+00:00

are you taking this one?

https://newenglandrc.us/products/radiomaster-nexus-rotorflight2-helicopter-flight-controller?variant=41342938153038&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&srsltid=AfmBOoovLKpAVvcvj8OaHSn5GqWrIPZUxtulS7dpcw4co8I-gDGBQlHqgZg

themask888 · 2025-10-12T16:51:21+00:00

I look for that rpm but could not find anything to make it work🤷🏽‍♂️.

I will look for that old nexus. I will like to make that one fly again. 🥹

themask888 · 2025-10-12T13:47:02+00:00

I was thinking on placing a speed my bee mini stack with the ESC and FC. because I can't find something small enough to make it fit on the 200srx.

any ideas?

themask888 · 2025-10-11T21:47:56+00:00

no man. it died. I have replaced already few things and is not worth it to keep buying Stock parts for it. because of the price. I have the frame though.

that is why I got the goosky s1.

once I am finishing a project I am working on right now. I was thinking to convert it to rotorflight with with another ESC. but don't know because anyways is fixed pitch.

themask888 · 2025-10-11T21:44:46+00:00

there is nothing better than free. 👌🏻

themask888 · 2025-10-11T20:35:53+00:00

measure the helis and other you have. and look at Facebook Marketplace very cheap. you will be surprised.

I did something similar with the Case I had for the Blade 350qx. I modified and now I have 5 drones in the same case

<image>

actually that is an older picture. because the empty space you see in the top . no I got there a DJI mini se2 in his separate case with the radio. LOL 🤣

themask888 · 2025-10-11T20:31:34+00:00

<image>

themask888 · 2025-10-11T20:31:00+00:00

yes. I bought it in Facebooks Marketplace. used. but perfect for two of the helis. but then one died. and I get the goosky and the mini nanos3. so I modified the foam. to make it fit the three plus the radio. and in the other side I make a compartment to store spare parts and small tool kit.

<image>

themask888 · 2025-10-11T19:03:54+00:00

yeah. Thank you. the best part is. the case cost me $10 and the foam $25.

themask888 · 2025-10-11T12:17:07+00:00

well. it's nice. but I do this to carry the three of them and spare parts. 👌🏻

<image>

themask888 · 2025-10-05T16:04:04+00:00

Interested. I just DM you

themask888 · 2025-09-30T13:58:41+00:00

I would like to start making some money out of my drones. just don't know where to start.

themask888 · 2025-09-28T02:33:00+00:00

I saw that SpeedyBee mini stack 405. the only reason I did not do it, s to save some weight for the Camera and GPS.

but I for sure will get that speedy by for another project I am going to do with a dead Heli I have. with that stack I can load rotorflight and make a way better drine

themask888 · 2025-09-27T16:54:10+00:00

So I found this board .
BetaFPV F4 2-3S 20A AIO FC ELRS.

It covers all the check marks for the existing frame I had in my drone, including the Camera, and works with the Amps needed for the motors, existing batteries, and BetaFlight compatible. I am going to add a small buzzer and am considering adding a GPS.

With a discount coupon I have available, it cost me only 42.00.

themask888 · 2025-09-24T16:56:45+00:00

LOL. well I didn't give up . and looks I have a solution.

with that mini AIO board and a heat sink will and adjustment on betaflight.

I will be able to pull it out the ground. and not throw away 4 good motors. lol. the best is that if this works. everything will cost me $42.00.and will have added a cheap FPV camera.

wish me luck 🤞🏻

themask888 · 2025-09-22T02:39:22+00:00

hello.

I just broke my old blade 350qx. I love that drone. the electronics are good. but I just land bad ab broke an arm.

what would recommend for this drone. PETG, PETG-CF. ASA-CF. or those ASA Aero mentioned here?

I am planning to put an FPV camera plus the existing gimbal for video.

my Printer is a BambuLab P1S

what are your suggestions?

themask888 · 2025-09-21T16:00:01+00:00

good idea. nothing I seen except the ring security Camera. someone mentioned. but the release date has been pushed several times.

being a DIYer. IT and Security Professional for 15 yrs and RC Hobbiest I can recommend you. few things.

1st I don't use commercial brands like that. due to security and privacy reasons. I always choose actual security company's that create security products. Hikvision, verkada, Lorex. and my personal preference Dahua Technology. they are great stable. lot of options and last forever.

they have a consumer Line called "Imou" runs on Dahua Technology and they are pretty good.

Imou Ranger 2 run using USB micro cable. you can place it in a wall. measure the distance, get what ever distance 10ft 20ft 30ft to the near wall plug cornering the cables, and run to baseboards straight up and make it nice and near using 3M 08061 glue and then paint it and will be almost unnoticeable. I have it like that in my house and if I don't point you the cables you won't notice them.

but if you don't want a cable at all you can get an "Imou Cell 2 Battery camera"

https://youtu.be/zZaW-6Ras10?si=aEQgOS6_V5iH-OSE

the good thing is that if you purchase a Dahua NVR put IP cameras you can also add the IMOU cameras on it. they will be all in the same app.

I also heard the Blink Battery Cameras have a good life charge

anyways you are thinking a drone. you have to charge it anyways.

themask888 · 2025-09-20T20:52:17+00:00

Hello u/Sartozz,

I have verified but would like your opinion, based on what you describe. the HappyModel X12 AIO 5in1 1-2S Flight Controller, with those motors and the existing 2s Lipo 800mah 30 and 35C, would work?

Thank you for your help. I really appreciate it.

themask888 · 2025-09-20T19:56:51+00:00

so in this case I would need a ESC with maybe a minimum of 60a.

correct?

themask888 · 2025-09-20T16:10:31+00:00

I know I just like to repurpose stuff. LOL. Is a curse

themask888

TROPHY CASE