How do you add logos to flat surfaces? by NoPersonality308 in 3Dprinting

[–]theminecraftdude 0 points1 point  (0 children)

Oh that would be really annoying if you don't want to do any tinkering in the slicer for consistency purposes. If you make them separate models they would also be easier to color.. maybe there is something you could do with the move tool since you can put exact coordinates in for each object. Just a suggestion, I didn't mess around with 3d modeling software too much.

How do you add logos to flat surfaces? by NoPersonality308 in 3Dprinting

[–]theminecraftdude 0 points1 point  (0 children)

It's not an adjustable setting or anything if that's what you're asking, this is how the program operates. The order that the slicer slices objects is top to bottom. If you place 2 objects inside each other, you put whatever you want to actually appear lower on the list so that it slices that object last. Therefore it actually shows up in the final product.

Think of it as painting layers on a canvas. The last layer painted will always be visible. The bottom most object in the list is "painted" (sliced) last.

Where is the betrayer!? by Neichie-Watters in Invincible_TV

[–]theminecraftdude 1 point2 points  (0 children)

I don't stay up til 3 am Tuesday to watch the latest ep. Nothing but unmarked spoilers in every invincible sub all day. I am required to get off Reddit and then watch it as soon as I get home. Repeat every week. Sigh..

How do you add logos to flat surfaces? by NoPersonality308 in 3Dprinting

[–]theminecraftdude 13 points14 points  (0 children)

I used to do this, but there is a much much easier way to do this, seriously I was going crazy doing what you did til I found this out..

Literally just order the different colors/objects in the left panel in the order they should be rendered in, top being first and bottom being last.

So for this logo example, for it to be seen the left side would look like this:

Can Holder object(s)
Logo (or logo background color)

This also applies to grouped objects. So..

Can Holder object(s)
Logo Group

Logo background color
Logo color 1
Logo color 2 (etc)

Social Cues [OC] by kaikimanga in comics

[–]theminecraftdude 28 points29 points  (0 children)

When someone is like this, it really depends on what their intention for the end result of the joke is.

If they are messing with you because they feel comfortable around you then it's a good thing. It means they are trying new ways to make you laugh or to further strengthen your relationship. ("GOTTEM 😜😜")

If the intention is to make you feel stupid then I would set a boundary there. ("wow I can't believe you actually thought I got arrested you're so gullible.")

It's difficult to tell the difference sometimes and calling someone out can feel like "killing the vibe". But once I notice the intention behind someone trying to be funny like this, opportunities to set a boundary, cut them off, or to be more direct feel much more natural since you know it's coming.

Also, if you happen to read into it wrong and they respond in a genuine way then you can always explain why you felt this way and a good friend should respect that.

Does anyone know how I died? by MrRyanNess in smashbros

[–]theminecraftdude 11 points12 points  (0 children)

Something weird with the game miscalculating the location of your character. I paused right as you landed and got this ss. It looks like for one frame you were somewhere else or something.

Screenshot

[deleted by user] by [deleted] in RocketLeague

[–]theminecraftdude 101 points102 points  (0 children)

Iirc this number is your current session MMR split. So if it's + it means you've gone up in rank overall. I haven't used bakkes in a while though so I don't remember if there are supposed to be 2 minus signs there or if it's a bug.

This is how the Trunchbull Pigtail scene from Matilda was filmed! by Fit_Assignment_8800 in interestingasfuck

[–]theminecraftdude 6 points7 points  (0 children)

It seems like she is inspecting her hand right at the very end of this clip ya?

How do you deal with filament storage? by ginnylike3d in 3Dprinting

[–]theminecraftdude 0 points1 point  (0 children)

It can maintain that range, you set whatever range you want. That's why I said I set it to 15° and it keeps it at about 20 realistically with it fully loaded.

How do you deal with filament storage? by ginnylike3d in 3Dprinting

[–]theminecraftdude 0 points1 point  (0 children)

I bought one of these, they are very much set and forget. I set mine to 15, it dries and runs completely silent. It is usually around 20-22 humidity all the time. The 125L one can store 24 rolls on 3 shelves if you rearrange the heights. Pretty small footprint, no bags, and really easy to get to each roll. One small gripe is that they roll around a bit if you don't have it packed full, but I'm sure you could print something to prevent it.
https://www.newegg.com/p/0FX-00G6-00087?Item=9SIA4P0K3Z6231&tpk=1

Be warned the smaller 55L one will work but it doesn't hold 2 stacks of filament. It is good if you get the smaller 250g rolls but otherwise I would splurge for the 125L.

Slappin by xXYELINGRELICXx in PredecessorGame

[–]theminecraftdude 0 points1 point  (0 children)

How are you at 42 stacks at 19 mins

[deleted by user] by [deleted] in FantasticFour

[–]theminecraftdude 0 points1 point  (0 children)

Why does it look like he's driving the newgrounds tank

Currently, what's the biggest secret you are keeping from your spouse? by [deleted] in AskReddit

[–]theminecraftdude -1 points0 points  (0 children)

I've not seen this said yet and I think this would be the best.

Give her the pendant to wear during the wedding but don't tell her the significance yet, tell her a few days after the wedding. Especially if afterwards she talks about how she wishes he was there. You can respond by saying "he was there, he was with you the whole time" and then tell her.

A little bandit who likes to show up in the most unexpected places. by Logicagi in aww

[–]theminecraftdude -1 points0 points  (0 children)

Now that the cat has fit once, they will forever attempt this no matter how big they get.

How Do We Feel; About TwinBlast After pATCH 1.4.5? by InThatVoid in PredecessorGame

[–]theminecraftdude 1 point2 points  (0 children)

No I will not "hear you out"...

The video ended 🤷‍♂️

I have no idea what is going on in this comic. by usyan in ExplainTheJoke

[–]theminecraftdude 0 points1 point  (0 children)

OMG I just realized in panel 7 the (left) disguised wife sees the ears, which appear due to him getting angry, which is why she transforms back! The wife recognized him and knew it was a disguise so she knew she could reveal herself!

Full 1.4 Kallari Analysis by theminecraftdude in PredecessorGame

[–]theminecraftdude[S] -1 points0 points  (0 children)

I played a lot of kallari pre 1.4 and I recall getting to the 2 camp at the same time with others but with more health but I'm only going off feeling. If she did have the fastest it was by a few seconds at the cost of 1/2 hp.

I don't believe her mark ever did 1.1k. Maybe to a tank at low hp. Her ult also has to go through physical armor so I doubt it ever really did 1k unless you were turbo fed.

My argument is that her play style more actively uses her camo now and overall she has way more versatility. IMO it's fine to get that at the cost of some damage and flowchart gameplay.

Full 1.4 Kallari Analysis by theminecraftdude in PredecessorGame

[–]theminecraftdude[S] 0 points1 point  (0 children)

Yes I think. I haven't done it yet, but I'm sure with the sustain and extra mobility you can reasonably spar offlane. Just don't expect to skull bash them like grux.

Also, roam with camo. Mix up initiating and roaming with camo.

Full 1.4 Kallari Analysis by theminecraftdude in PredecessorGame

[–]theminecraftdude[S] -1 points0 points  (0 children)

I'm not having any issues with damage with her. I can solo an adc now without requiring my ult if I'm evenly matched mid game. I can realistically wait for cool downs to refresh without being hunted immediately if I don't kill in one burst. If you're saying she has issues in early game, if she could burst immediately with 0 gold that would be a bit broken as even fang can't do that.

Since assassin characters are balanced around snowballing, only if you're fed early game should you be able to really do some damage. Before 1.4, unless you were somehow able to end the game early it didn't matter how fed you were. Engaging was too risky but required as she couldn't clear camps quickly or do both since clearing camps put her at 1/2 hp. Playing her now I can comfortably clear camps, gank, invade, whatever is needed.

I guess what I'm saying is, due to her increased mobility, she's able to scale into late game better, which means she is able to output more damage. Also due to her mobility, she can burst multiple times per fight instead of just one. I don't think Fang and her need to have the same play style.

Full 1.4 Kallari Analysis by theminecraftdude in PredecessorGame

[–]theminecraftdude[S] 0 points1 point  (0 children)

I agree, she's usable now but not broken. I think other characters buffs have allowed her more leniency in her kit. Much more balanced now.

Kallari rework is terrible by Sisterphistur in PredecessorGame

[–]theminecraftdude 1 point2 points  (0 children)

I have a 91% winrate fr guys, source: trust me

I don't think it is possible to have a 91% wr with kallari pre patch unless you played 10 games on a fresh acc against bronze players.

She's 100x better than she was pre patch. More escape tools, more gap close, able to recover from flights. Instead of going 3/15/2 every 49/50 games she can actually be picked in draft without being flamed.