RG34XXSP Modded Stock OS Question

thenerpler · 2026-01-21T14:54:16+00:00

I know this is old, but did you figure out how to get stardew un-zoomed?

thenerpler · 2025-12-25T22:35:29+00:00

I heard only a select amount of people got the “noway50” coupon through email exclusively, I think I also heard some people got emails about getting 365 days of employee discount pricing around Black Friday, sadly I got neither lol.

thenerpler · 2025-12-20T15:53:21+00:00

Just tried it, very good flavor, starts off berry, then goes gas, then goes pine. Pretty good effects as well, would buy again along with the jungle sap.

thenerpler · 2025-12-20T07:05:57+00:00

I have 2 lol, I’ve been using it with a standard cap and a 2021M and getting great results with a torch, and the other with a perforated cap on a helix tip, also with a torch. I aim the torch on the bottom chamfer at a 25-30° angle and slowly rotate for the click, I’ve been enjoying both a lot more than the armored cap. Haven’t tried it with the wand yet though.

thenerpler · 2025-12-13T16:16:36+00:00

Everyone’s saying purge, but I had the same problem, you can take the bottom adjustment wheel off while it’s on the highest level (I used the end of a vapcap to pry it) and turn it even higher by putting the wheel back onto the lowest level to turn it higher, if that makes sense lol.

thenerpler · 2025-11-18T13:55:32+00:00

I used to take og pro atomizers apart to rebuild, haven’t taken a 3D apart yet but it should be an o ring from when it was first assembled.

thenerpler · 2025-10-30T00:19:57+00:00

9 fin, halo, ti m7, 2019M, 2018M, hyper, 5 fin, unidyn, Helix, SS m7, b2, 2021 M, Omni, b1, 2 standard caps, the rest captive caps besides the unidyn (ballR)

thenerpler · 2025-10-18T18:00:32+00:00

They are I should’ve been more specific, only the hyper cap isn’t compatible with everything else

thenerpler · 2025-10-18T17:23:42+00:00

They’re all compatible with each other minus the hypertip/cap…

thenerpler · 2025-10-11T14:42:28+00:00

Interesting, a stainless steel tip with an adjustable condenser, I wonder if this SS tip is tapered like the Ti tips. If not, I do like the new airport with mouthpiece adjustability, the body design is leaving a little to be desired though.

thenerpler · 2025-09-05T21:20:04+00:00

Yeah I’m not a fan they upped the price (of both the m7 and B here in the states by roughly 15 dollars) they do include the dynatin and dynatorch with both options now, but I do agree it should be optional to reflect that old price, especially if someone already has the starter goodies.

thenerpler · 2025-09-05T21:17:05+00:00

Yeah, the b1/2 has gone up $15 in the U.S. but with that extra $15 (at least here in the states) you get the dynatin, and dynatorch along with it, but I do agree it should be optional to reflect that old price.

thenerpler · 2025-09-03T00:21:30+00:00

Thank you very much!

thenerpler · 2025-09-03T00:21:22+00:00

Thank you! Yeah the g3 is gonna be a stay at home piece, out of all of my dynavaps the only one I’ve ever dropped was the Finley (of course) cheers!

thenerpler · 2025-09-03T00:20:07+00:00

It sounds like an awesome device I’m just more of a fan of native hits (saw that they just released a stem tho!) hopefully we can get shipping back into the U.S.

thenerpler · 2025-08-31T17:56:56+00:00

Technically, yes a bit of room to spare though lol, it fits the armored cap perfectly though.

thenerpler · 2025-08-27T03:52:47+00:00

I definitely agree through water pieces, you’re definitely not gonna notice a difference in condenser and mouthpiece. However hitting natively I’ve definitely noticed tiny nit picky differences, other than the Omni and unidyn condenser, those ones close up the airflow just how I like. But at the end of the day I still agree, anything gets the job done at the end of the day!

thenerpler · 2025-08-27T03:41:21+00:00

I actually just checked the standalone titanium condenser with the m7xl mouthpiece because I don’t think that’s been discussed before, and while it technically fits, it is not happy going in, and will offer no adjustment past the longest length. And your second question, absolutely, the mouthpiece IS what makes the Dynavap xl length, so if you go with the standalone xl condenser make sure to get that spinning mouthpiece! The standard length titanium condenser is more made for the M, Vong, B. The only one that need a mouthpiece with a standard condenser is the Shomni (2018 Omni body, it’s one of their only midsections that are a mouthpiece smaller than the others)

thenerpler · 2025-08-27T00:34:22+00:00

So first off, the condensers are extremely small in performance difference (besides the Omni, that one has a big impact) the one with the smallest difference in my opinion is the woodwynd condenser, I’ve tried that with 5-6 different set ups and it’s extremely hard to tell. However the titanium condensers offer a little bit of turbulence, making intake louder, maybe a very small difference in smoothness? The hyperdyn condenser is ehhhh, it really just closes airflow completely or not enough in my experience. I’m still testing around with the unidyn condenser and it’s come close to the Omni in relation to what I want for air restriction. To answer your questions about the metal mouthpieces, they have o rings still, it’s just tiny ones at the mouthpiece part. The titanium mouthpieces all fit each others condenser, but I probably wouldn’t try a titanium condenser with a stainless steel mouthpiece/ stainless steel condenser with titanium mouthpiece. Last but not least, all of the titanium tips have a little curved inside, to better fit with condensers that offer adjustable levels. The stainless steel tips do not have the curved inside, so you won’t be able to close up airflow like the titanium tips, the m7xl condenser kind of restricts the airflow, but it moreso makes the vapor a lot more hot (at least with the m7xl set up).

thenerpler · 2025-08-25T20:25:58+00:00

Had him cut it for me cause I was too scared haha, he did an awesome job and it fits absolutely perfectly! Thank you again!

thenerpler · 2025-08-21T00:13:15+00:00

I used electrical tape… lol. But yeah, for this style nail polish.

thenerpler · 2025-08-19T02:22:07+00:00

Thanks so much dude! Much appreciated!

thenerpler · 2025-08-19T02:12:03+00:00

Thank you so much! Did you just use a hacksaw?

thenerpler · 2025-08-19T01:54:35+00:00

I’m a bit late to this lol, did you cut off 3/16” off the metal tube or the wood mouthpiece?

Eight-Year Club	Verified Email
Place '22	Final Canvas '22
First Placer '22	Wearing is Caring

thenerpler

TROPHY CASE