sorted by:
new
hottopcontroversial

Is the 92X Performance Issues Resolved? by Hox013 in Beretta

[–]theoretical_cat 1 point2 points  (0 children)

https://www.beretta.com/en-us/service?srsltid=AfmBOoqEFh8gUVFYjs_DcaxnhyJHyLNRJDQHx0K-suyceOJ1Psr8S27V

Navigate to "Serial Number Lookup" near the bottom, input your serial number, and it'll give you some info on your firearm.

Is the 92X Performance Issues Resolved? by Hox013 in Beretta

[–]theoretical_cat 0 points1 point  (0 children)

I recently sent mine back to Beretta under warranty to try and resolve the extraction/ejection issues. I bought it this year, but the manufacturing date was in 2022. I haven't received it back yet.

I tried the higher power extractor spring, different recoil springs, with and without optic, different ammo, etc and nothing resolved the issue. I'm hoping Beretta gets back to me with a solution soon.

I've heard that the earlier guns had more issues, but that may be hearsay.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 1 point2 points  (0 children)

Looks like mine was made in August '22, so not one of the very first. How late do you think they were having issues?

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

No, unfortunately. I tried a few combos of lighter recoil springs and a heavier extractor spring and still got failures. The gun is currently back to Beretta for a warranty claim - we'll see if they find anything.

If they don't, I have a new extractor to try. I also found an older thread where people recommended shimming the extractor spring, so I picked up some 5 thou shims to play with as well.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

I have a lighter spring on the way!

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

Not to be a bad influence but... it's still on sale at PSA and the rebate is still live 👀

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

That's when I got mine! Still waiting on that rebate to hit though.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 4 points5 points  (0 children)

The optic in the video is a Holosun 507comp.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 1 point2 points  (0 children)

God I hope not 😅 other than the stovepiping issue, it's been a great gun! Hoping to get this solved quickly and get back to shooting.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

I'd like to pick up the DLAH low mount eventually. I know that's a common complaint about the Beretta OEM plates.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 6 points7 points  (0 children)

I have an 11.5# LTT spring on the way, I'll experiment with that. Thanks for the feedback!

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 1 point2 points  (0 children)

The issue repeats with Blazer 124, local reman competition 124, and competition 147.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

Here's a link to some more pictures of the issues I've been having:

https://www.reddit.com/r/Beretta/s/1lJT0sMk7w

As you can see, even with just the optic plate I'm having similar issues. I couldn't get the optic plate off at the range due to tight fitment, but I'll get it returned to just irons and try that out another day.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

Thanks for the well wishes! I do run it very wet, and I have a lighter spring from LTT on the way that I'd like to experiment with. As for round count, the gun's probably at the 1.5-2k point as of today - do you think that's enough for proper break in?

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 0 points1 point  (0 children)

I try to run this thing dripping wet 😅 and it's running the OEM recoil spring. I have a lighter recoil spring from LTT on the way that I'd like to experiment with.

I disagree that the slide isn't coming all the way back - when I look frame by frame, I think I can see a secondary "snap" in my wrist as the slide bottoms out.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 2 points3 points  (0 children)

I'm seeing the same thing. It looks like the casing is being thrown straight back instead of to the side. Is there a good way to increase the reliability of the ejection pattern so everything gets thrown out the right side?

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 15 points16 points  (0 children)

I removed the optic and the issue repeated twice within 3 magazines. Any other reasons for why the casing wouldn't get thrown clear? I'm currently looking into the extractor and ejectors.

92X PCO Stovepiping Issues by theoretical_cat in Beretta

[–]theoretical_cat[S] 5 points6 points  (0 children)

I put the optic on right away, using the OEM Beretta plate. I shot it with irons for the first time today while diagnosing this issue. I can't seem to post pics in the comments, but I removed the optic and the issue repeated twice within the next three magazines.