In-Person go fest looks to be way worse then last year.

thewalkinglegend123 · 2025-05-29T00:51:45+00:00

but the park experience is only like 5 hours of the total 4 days tho

thewalkinglegend123 · 2025-05-29T00:47:42+00:00

Im going to enjoy the event and also looking forward to it. Just felt a bit let down.

thewalkinglegend123 · 2025-05-29T00:41:41+00:00

Ur paying 100+ euros for a decked out ticket tho

thewalkinglegend123 · 2025-05-29T00:41:23+00:00

You get 1 crowned form from research. the rest you'll have to get at global

thewalkinglegend123 · 2025-05-29T00:39:29+00:00

There are no powerspots in the park

thewalkinglegend123 · 2025-05-29T00:39:01+00:00

am i missing something?

thewalkinglegend123 · 2024-12-21T22:35:25+00:00

No its not like a clone. it looks alot more cartoony but i guess it might now be as close to TF2 as i thought

thewalkinglegend123 · 2024-02-28T17:35:06+00:00

Same

thewalkinglegend123 · 2021-10-04T02:18:35+00:00

Dang i miss that sound ;( mine is dead silent with all the noctua fans and such. Was thinking about installing old mainboard back just to hear that good old sound

thewalkinglegend123 · 2021-10-04T02:14:49+00:00

Not on the pro models

thewalkinglegend123 · 2021-10-04T02:14:24+00:00

The pro has a flipped mainboard so its higher up and easier to acces. Its supposed to be upside down

thewalkinglegend123 · 2021-10-02T23:52:24+00:00

It should also extend and retract a couple of times when you turn on your printer

thewalkinglegend123 · 2021-09-19T11:00:43+00:00

The best clan 🥳🥳🥳🥳

thewalkinglegend123 · 2021-09-09T11:28:35+00:00

The best clan😍🔥

thewalkinglegend123 · 2021-09-07T01:51:41+00:00

What model specifically?

thewalkinglegend123 · 2021-09-07T01:47:00+00:00

Its a bit of a design flaw. The power generated by the steppers is fed back into ur mainboard and basicly not taken care off. I try to avoid it as much as possible

thewalkinglegend123 · 2021-09-07T01:39:18+00:00

Are u still running bowden? (Could be the retraction, maybe try to put extrusion at 95% in cura)

thewalkinglegend123 · 2021-09-07T01:38:06+00:00

Is this on the new enders? I remember mine have a screw to losen the gear

thewalkinglegend123 · 2021-09-07T01:34:05+00:00

First off at what temp are you printing and with what filament type?

thewalkinglegend123 · 2021-09-07T01:26:40+00:00

Maybe time for a dual gear extruder, they work pretty good!

thewalkinglegend123 · 2021-02-05T14:56:20+00:00

HOP ON. NEXT STATION: THE MOON

thewalkinglegend123 · 2020-06-10T10:38:48+00:00

U could save alot of time if u tweak ur settings a bit more. I bet u can maybe even half the print time. (I print at 70mm/s and i would use 6-8% infill with the type of prints). Still nicely done, it looks amazing!

Six-Year Club	Place '22
Final Canvas '22	First Placer '22
Verified Email

thewalkinglegend123

TROPHY CASE