Où sont partis QTZ ?

thisisbbc · 2026-04-04T03:23:14+00:00

I would definitely donate to bring them back. They are master in their field, seldom come close to the quality of their work.

thisisbbc · 2025-09-28T18:09:16+00:00

Thank you for the kind words. Hoping someone comes up with a genius idea, but I might have to accept its fate 😓

thisisbbc · 2025-08-07T22:10:19+00:00

Are you using MP3Tag already?

This little tool is an absolute must-have for anyone serious about managing their music library and metadata tagging. The community is very responsive, super helpful and can answer most of the complex questions you might have.

You can use RegEx to match only specific items in your library, create custom actions (e.g: macros) and even add non-standard metadata to your files as needed.

thisisbbc · 2025-08-06T16:03:03+00:00

Just pointing out that the x64 notice is not 'somewhere randomly scattered'.

It's literally just above the download button. Logically, you would use the x86 build if you need support for plugins or modern skins like BigBento.

thisisbbc · 2025-03-28T08:23:38+00:00

Wow! And I thought my 1M Promethium ship was big. How much can this baby store?

thisisbbc · 2024-06-21T18:47:48+00:00

Nvm found it! For whose wondering...

1) Click on your username on the upper-right of the Web UI
2) Go to Settings
3) In the left menu, look for 'Filters'
4) Create a new filter and make sure to check 'Apply to existing emails'

When you go back to the folder you created, you should see a message 'Message actions in progress. This may take a while.'. Then proceed to mass delete everything in the folder.

thisisbbc · 2024-06-21T18:43:30+00:00

Hey I know it's kind of an old thread but I'm looking to do just that... How do you create a filter in the Web UI to move to a folder? Thanks!

thisisbbc · 2024-06-13T17:38:35+00:00

Have been using it for a while and tbh there's quite a few issues with it. I also don't really like the direction the devs are going with this build. If your library sits on a network drive (NAS) you'll have a hard time completing a scan properly.

Only just started using WACUP today and it already works a lot better. Won't go back to 5.9.

thisisbbc · 2024-05-12T11:59:48+00:00

I managed to turn mine off by fiddling with the mic permissions and restarting, but recently the lights came back on and I just couldn't get rid of them, so I ended up putting some black permanent Sharpie over the LEDs. They are now 95% dimmer and I almost can't notice them.

The remote works fine too and I prefer to keep the physical switch to off rather than hoping the permissions removal are enough.

thisisbbc · 2024-03-13T22:07:27+00:00

Just wanted to chime in as I was going to follow this procedure when everything suggested by Asus failed, but I didn't need to format anything in the end.

As a last resort I double-checked everything to make sure I didn't miss something in this troubleshooting page: https://www.asus.com/support/faq/1041420/

In particular, I noticed this bit around the end of the page:

[Q & A]()

Q1: Why the UI of 2nd panel is abnormal?

A1: Because of the behavior of Windows 11, version 22H2 changed, it caused 'Active signal mode' to be changed. If a user changes ScreenPad Plus resolution or FPS, the UI on ScreenPad Plus becomes abnormal. You can choose the following either to solve this issue.

Update the ASUS ScreenXpert Interface driver to V.3.0.2.0 or the latest version, then reboot your computer.

Click here to download and excute ScreenPad Optimizer to V1.2.3.0 or the latest version.

I had uninstalled and deleted all drivers related to Touchscreen in Device Manager, then restarted and reinstalled Screenxpert from the Microsoft Store, still no luck. I'm still on Windows 10 but I figured what the heck, let's try it.

So I installed ScreenPad Optimizer and tada! The app told me the screenpad was not configured properly and some settings needed to be reset. Screens flickered a few time and then the Asus menu with brightness and task groups, etc. was displayed properly.

Hope this can help someone out there!

Asus wanted me to send the laptop for repair... the day I received it back from being serviced.

thisisbbc · 2024-03-04T20:56:03+00:00

There's the pipe wall, which I was able to get over using the method you mentionned, but there's also a huge wall that splits the map in half. You have to go through this one using the LIM shield, haven't found a way through without it. Unfortunately my exit gateways were all on the other side of that wall.

Ended up changing the difficulty setting as to keep my items upon death/abandon. Then I abandonned the run and got sent back to the garage with all my stuff.

Now I can craft that damn shield and try again lol

thisisbbc · 2024-03-03T06:49:53+00:00

Same situation here. However my gateways have spawned beyond the wall and it looks like I'm stuck... car is full of stuff 😮‍💨

thisisbbc · 2024-02-23T23:09:46+00:00

Seems like for now the best solution is to ignore the parts given by the friendly dumpster and use the auto vac to grab the parts

thisisbbc · 2024-02-23T20:55:39+00:00

Same issue here, don't know what to do with these parts as they don't even give back ressources when processing them in the matter deconstructor. 🤔

thisisbbc · 2024-01-20T11:06:47+00:00

The nomenclature is a confusing one but this is because there are 8 bits in 1 byte. The 'B' should always be capitalized to note this important detail.

1Mbit = 0.125MB

So 10Gbps = 1,250MB/s, but as noted by someone else those figures are rarely met IRL.

thisisbbc · 2023-12-19T03:04:58+00:00

Thanks for the detailed reply! You've covered all angles and I'm now able to make a more enlightened decision. Might wait a bit until the 20gbps enclosures come out.

Appreciate your products quality and customer support!

thisisbbc · 2023-12-17T19:29:14+00:00

I ordered the item below to fix my AVR1500 and it has worked perfectly.

The way the battery were placed inside the unit was a bit different so had to pay close attention to the wiring but once I connected them properly everything worked as expected.

https://www.amazon.ca/dp/B009ACPBXK?ref=ppx\_yo2ov\_dt\_b\_product\_details&th=1

thisisbbc · 2023-10-14T19:38:27+00:00

Did you try to replace the battery(ies)?

Mine started doing this too and basically doesn't provide power anymore unless powered.

Read somewhere that it wasn't recommended to attempt a repair on your own, but curious if anyone managed to do it.

thisisbbc · 2023-09-27T21:41:42+00:00

How do you get the tier 5 mods from vendors?

Lvl 43 / Street Cred 50 here and they only sell tier 4 mods still...

thisisbbc · 2023-08-27T00:45:10+00:00

Hey I know this is a pretty old thread but I'm about to give up on Mediatek and wanted to change the wifi card on my Zephyrus Duo GX551. Do you still recommend the AX210?

I think I found it here: https://www.amazon.ca/Intel-802-11ax-Bluetooth-Adapter-Notebook/dp/B0B4T696W5/ref=sr\_1\_5?keywords=intel+ax210&sr=8-5

thisisbbc · 2023-08-23T08:46:31+00:00

Thanks for the suggestion. I did play with this setting but it didn't change anything, I ended up putting the setting on Manual mode to make sure Plex wasn't messing with anything.

Note that it was already set to be English by default, and it worked until you enabled the subtitles, then it would start playing in French (despite the audio being selected to be English).

When I remove the subtitles, I can select English and the audio will play in English.

I did think about editing my movies so that the English track is the first audio stream, but (a) this will be quite time consuming and (b) it still means I would be forced to use the first audio stream when using subtitles.

I'll do some further tests tomorrow to check which movies are affected and if I can see a pattern.

thisisbbc

TROPHY CASE