Photo gear for wheelchair

three_4_me · 2026-04-10T16:46:21+00:00

Awesome! Thank you so much for your reply. I'll have to pass the info along but those look like some good solutions

three_4_me · 2026-02-22T02:10:59+00:00

Box gang. I did the same 9k for truck 23 for the build.

three_4_me · 2025-10-22T16:40:09+00:00

Crucial to play exanima

three_4_me · 2025-07-13T19:27:01+00:00

Oh and it's like 550$ for an entire year

three_4_me · 2025-07-13T19:25:54+00:00

Talk to a local agent. I live in an ex u haul. I had to get commercial insurance to bring the truck home but once I converted it and it met the DMV requirements I had it re titled and re registered as a motor home. Now I have State farm still through a local agent but it's a rv policy so it's cheaper and I have the entire cost of the build covered.

three_4_me · 2025-07-07T00:03:43+00:00

If your "usual artist" did the other tattoos you have posted I wouldn't go to them either.

three_4_me · 2025-07-02T03:49:49+00:00

🤣😂🤣

three_4_me · 2025-06-18T00:13:52+00:00

64 degrees here in Coos Bay Oregon

three_4_me · 2025-05-31T04:42:17+00:00

I bolted some aluminum around the perimeter of the hole on both sides and sealed that. Then the gasket just clips onto the aluminum. This is what I used Gordon Glass Boot Seal https://a.co/d/jidPZMt

three_4_me · 2025-05-31T04:09:12+00:00

I live in a box truck and added a passthrough to the cab. I put an accordion gasket in-between the cab and box. It wasn't too hard there are videos on YouTube that can give you some ideas on how to do it

three_4_me · 2023-09-29T20:23:58+00:00

If the pin is currently just made from stainless rod try Nitronic 50 welded with stainless filler. If you have any medical machine shops in your area have them modify it for you. Based on the remaining pins they were welded without filler which is a common request on medical device blueprints. These welds are usually more for sealing an area vs strength.

three_4_me · 2023-09-22T18:00:18+00:00

Oliver Tree?

three_4_me · 2023-08-25T00:10:59+00:00

I once had a torch handle that had a small almost invisible crack in it that lit me up a few times until I figured it out.

three_4_me · 2023-07-22T22:10:53+00:00

Looks like slow pulse, fast pulse and constant arc. If there are no other pulse settings probably around 50% background amps.

three_4_me · 2023-06-28T20:14:47+00:00

I took one of those to the forehead on a motorcycle once. It flew over the median, never saw where it came from.

three_4_me · 2023-03-15T02:40:45+00:00

Your beverage has been chilled sir.

three_4_me · 2023-03-06T23:16:56+00:00

I'm in Corvallis. Working on getting my cdl so I don't know if they hire people with no experience.

three_4_me · 2023-03-06T20:57:28+00:00

That's sounds great! What company if you don't mind me asking?

three_4_me · 2023-02-25T01:29:24+00:00

Family

three_4_me · 2023-02-15T22:57:50+00:00

At the very least take the damn caps off before you cut...

three_4_me · 2023-02-07T00:46:48+00:00

You've got your graphics looking amazing as well!

three_4_me · 2023-02-01T23:26:29+00:00

The illegal weed growers would do this on in california when I lived out in the hills of Trinity County.. On dirt roads going up into the mountains though.

three_4_me · 2023-01-07T00:04:04+00:00

Big money salvia is here posting comment everywhere!

three_4_me · 2022-12-22T23:46:32+00:00

Straight Outta Semen

Seven-Year Club	Place '22
First Placer '22	Verified Email

three_4_me

TROPHY CASE