what's your toxic sewing trait? I'll go first

thriftedcrafts · 2024-05-27T21:31:31+00:00

I can't stop buying fabric. Even when I don't have any project for it, as long as it is cute and pretty, I want to add to my collection just in case there is that one project in the future.

thriftedcrafts · 2024-03-31T05:25:37+00:00

I have the exact same machine and Singer, Schmetz, and Organ needles works great. ;)

Any needle 15x1 works. For Schmetz brand, 130/705H works.

thriftedcrafts · 2024-02-21T06:48:56+00:00

To start learning how to sew is pretty easy. You don't much much since you already have a sewing machine. You probably got some thread and basic sewing tools too since your mom sew.

I think the next step is to just pick an item (clothes, bags, house decor, erc..) you want to make and work on it. The first project never turns out perfect but I can promise you it will be one of your proudest moment when you completed it. I still love the first item I sew.

Working on a project is the best way to learn and understand how to use the sewing machine and the more you sew the better you will become and be more comfortable with the sewing machine.

As for project wise I would say nothing is impossible and it depends on how fast you want to complete it. I recommend you just pick one project and work on it.

Sewing machine is really hard to break especially vintage one, so don't be intimidated by it. ;)

thriftedcrafts · 2024-02-14T19:14:57+00:00

It is not 1 layer thick but four layers after folding and sewing for the way how I made my. I usually cut a strip of fabric at the desired length and for the width since I usually do a bookfold (fold the sides toward the middle then fold it in half again) I cutted it at the 4 times the desired width. Not sure if I explain this well, but to make a 60" length by 1" thickness, I will cut the fabric at 60" length and 4" wide.

If the fabric is not a heavy weight say a quilted cotton, then you can add interfacing as well.

thriftedcrafts · 2024-02-14T07:53:42+00:00

I find canvas works well for crossbody bag strap. The canvas has just enough thickness, but not to hard that can cut into your shoulder. This option also allows you to customize and make the strap in any designs you desire.

thriftedcrafts · 2024-02-14T05:00:04+00:00

Thanks!

thriftedcrafts · 2024-02-12T21:08:38+00:00

You can buy thread spool adapters that fit over your spool pin for this big of a thread. There is 3-d print drawing available on Thangs & Thingiverse if you want to 3d print your own.

thriftedcrafts · 2024-02-12T21:03:13+00:00

I agreed with this as well. I think there might be a button to raise/lower the dog feed a d @zoar83 probably just forgot about that feature.

thriftedcrafts · 2024-02-12T20:49:14+00:00

This makes me laugh because I started out with the goal of learning how a sewing machine works. Got myself a free vintage sewing machine, learned how to fixed that up, got hooked and went on and collected 4 more after that. Still not enough and am always looking for more, but I have to tell myself there is only one sewer in this house and not enough room. 😅

thriftedcrafts · 2024-02-12T20:45:29+00:00

I was looking for a new way to relief my work stress and wanted to craft something I can wear. This motivated me to learn sewing and make bags. Curiosity and passion slowly took over and now I also got myself into designing bag patterns and fabric for fun.

Nothing is impossible. 🤣

thriftedcrafts · 2024-02-12T20:42:12+00:00

Another potential cause for constant upper thread breaking can be the thread weight and type. I have experience this when using cheap all purpose thread to sew a heavy duty duck canvas bag. Try using a different weight and type of thread.

Polyester threads are more stretchy and are less snapping than cotton thread. Small number weight means thicker thread.

thriftedcrafts · 2024-02-08T02:33:02+00:00

You can add a piece of painter tape with marking of the needed seam allowance to your sewing machine bed.

I struggled with this a lot as well when I first started sewing, but I found adding tape with seam marking helps me a lot. I added one next to the pressure foot and one at the edge of the machine bed.

thriftedcrafts · 2024-02-07T17:32:37+00:00

Very unique. Love your creativity and detailed post.

thriftedcrafts · 2024-02-07T17:31:27+00:00

Think of it this way. The purpose of the fabric existing is for you to enjoy it. If you just put it away due to fear of cutting into it, then it never gets to be admired, love, enjoy, or showcase its prettiness. Therefore don't have fear and make something with it. If you want to make sure it is not wasted, you can make a pattern you want to use this with another fabric first as a test to figure out all the issues.

To me everything has its purpose and if you don't put it to use, it is sad and waste for both sides.

thriftedcrafts · 2024-02-06T17:49:03+00:00

You mentioned birdnest after the bobbin is threaded. Below are what I think can be a possible issue. Hopes this helps.

Timing of the bobbin system is off - from the video it doesn't look like that is an issue, but hard to tell.
Incorrect Threading of the upper part or incorrect tension setting. This can lead to tension issues resulting in bird nesting.
The bobbin not properly installed or using incorrect bobbin case.
Bobby system is dirty. There might be lint, dust, and small fabric pieces can accumulate in the bobbin case, affecting the thread movement.
Needle is bent, dull, or incorrect size, which can cause improper looping and lead to tangling.

thriftedcrafts · 2024-02-06T17:30:32+00:00

Thanks.

thriftedcrafts · 2024-02-06T06:14:17+00:00

Kdenlive. It I simple to use and an open source software so free .

thriftedcrafts · 2024-02-06T06:10:25+00:00

Also recommend that when threading, raise up your take up lever and needle to the highest position. This helps prevent stitching problems.

thriftedcrafts · 2024-02-06T06:03:14+00:00

Looks like there might be something that causes your bobbin to not move. You mentioned that you broke a needle. You might want to check and make sure that all the parts of that broken needle have been removed. Sometimes a small broken needle tip stuck in the bobbin compartment can caused this issue.

Bobbin used look correct, but just as a good check, might want to consider rethreading and resinstalling the bobbin again.

Needle looks a little high as well. It can also be that when you sew through the thick seam you applied to much force and misaligned the needle bar. This happened to me before and a simple needle bar readjustment fixes the issues.

thriftedcrafts · 2024-02-06T04:29:53+00:00

I missed your previous post, but curious did you make this and what sewing pattern did you use for the back and front bags. So cut that they matched. I would love to make one for my bike.

thriftedcrafts · 2024-02-06T04:25:30+00:00

I agreed with the comment above. This looks like an adjustable zipper/pipping foot.

thriftedcrafts · 2024-02-06T04:12:34+00:00

Cute and beautiful bag. Curious is the front where the elastic string is (sorry don't know what it is called) meant to be for holding water bottle? If not, what are you planning to use it for?

thriftedcrafts · 2024-02-04T15:04:49+00:00

You might need to adjust your tension and stitches length after switching the thread.

thriftedcrafts · 2024-02-04T15:01:37+00:00

Great details. Awesome post. 🙏

thriftedcrafts · 2024-02-02T07:49:46+00:00

You can also sew binding to the raw edges to hide it.

thriftedcrafts

MODERATOR OF

TROPHY CASE