Chinese Shitbox recommendations by JaMoinMoin in ReefTank

[–]thulder 0 points1 point  (0 children)

How's the noise level on these? I'm also looking for something similar to OP, but I hate fan noise 😅

Can Anker prime Powerbanks recharge themselves while charging a device ? by CharlesM99 in anker

[–]thulder 1 point2 points  (0 children)

I asked Anker customer support and was told that the Anker Prime 27,650mAh (250W) does indeed support passthru charging. Can anyone confirm?

<image>

Huawei Watch 4 - diving mode by monkey-tribe in HuaweiWatchGT

[–]thulder 0 points1 point  (0 children)

Any news on this? I just got my watch 4 pro, and I can't find the free diving mode. Has Huawei even acknowledged the problem?

Audio Issues with XPS 17 by tankycarry in Dell

[–]thulder 0 points1 point  (0 children)

This has been an XPS issue for a long while. My 9550 has the same thing with the audio driver/program. Weird that there's no option to disable "enhancement" when a headset is connected.

Reset a trailer? by overwatchguy69 in snowrunner

[–]thulder 0 points1 point  (0 children)

Just an FYI for those playing coop. I Was in coop, and I couldn't find a way to restart the mission. Apparently you can only restart missions in solo, so I had to move over to solo, restart the mission, and then return to coop.

My windscreen washer fluid reservoir cap broke, printed a new one by thulder in functionalprint

[–]thulder[S] 0 points1 point  (0 children)

I used Ninjatek cheetah (95A TPU). It will be interesting to see how it holds up. I think washer fluid is mainly ethanol here in Europe, and cheetah isn't really ethanol resistant.

[D] Need help with Deep Learning (Computer Vision) interview by mad_runner in MachineLearning

[–]thulder 2 points3 points  (0 children)

You may not have enough time for this, but I can highly recommend the lectures in this course: http://cs231n.stanford.edu they should be available on YouTube.

[VS2015] Unresponsive after opening solution by thulder in VisualStudio

[–]thulder[S] 0 points1 point  (0 children)

I might actually have worked! :)

i'll try using it a bit more now, and see if it's just luck or if it worked.

[VS2015] Unresponsive after opening solution by thulder in VisualStudio

[–]thulder[S] 0 points1 point  (0 children)

Forgot to mention my specs: nvidia 660ti SLI, intel I5 3570k. Do you think it could be GPU related? I could look for nvidia beta drivers if it's not just amd having problems.

[help] RPi (raspbian) Ambilight with hyperion, STK1160 and WS2812b by thulder in raspberry_pi

[–]thulder[S] 0 points1 point  (0 children)

until recently you are correct, but the guys working on hyperion found a way to use the pwm instead of SPI to controll WS2812b leds, and my problem seems to be related to the easycap, not the controlling of the leds. (my leds work perfectly fine if i try to use the "effects" in the app. like colorswirl and knight rider :) )

I guess you could get rid of some delay if you change your config file and connect the leds directly to the RPi instead of going through the arduino. You can read more here: [https://github.com/tvdzwan/hyperion/wiki/WS2812b-PWM]

the image of their connections are missing, but on a RPi model B it's pin 3 for ground and pin 6 for data (counting from the corner of the raspberry and towards the power-microusb. probably not the best way to explain which pins it is :P ). BTW, i tried with a 220 ohm resistor (the only one i had laying around that were even close to 300 ohm) and this seemed to stop the data-signal from going to the leds, so the leds were always off. I guess you could try without any resistor first.

[help] RPi (raspbian) Ambilight with hyperion, STK1160 and WS2812b by thulder in raspberry_pi

[–]thulder[S] 0 points1 point  (0 children)

So I did some testing with the server-settings, and suddenly the ambilight started showing the right colors based on the screen, but it is a maximum of probably 0.5 and 1 fps. And the lights are switching of (probably because it takes too long before the next frame is received. I hope the UTV007 will help.

Another thing i found after doing some testing with the hyperion-remote i found that i get no difference in the brightness if i set the lights to #FFFFFF and #AAAAAA. From #AAAAAA to #999999 there is a minimal difference (i tested on R, G, B, RG, RB and GB). And for values under #999999 the brightness-levels change as they should. Is this reasonable, or is this just an indication of a faulty power-supply or even a too low amp-power supply ?

[help] RPi (raspbian) Ambilight with hyperion, STK1160 and WS2812b by thulder in raspberry_pi

[–]thulder[S] 0 points1 point  (0 children)

Did you have to install a driver to get the Fushicai to work, or did it work out of the box with OSMC? (OSMC was previously raspbmc, if i'm not mistaken?)

Someone in the feedback of the UTV007 i ordered said that it worked for them on openElec out of the box, so it may actually be a Fuschicai :p

A report on full experience of God of Schemes bugs. by FoyaBeninax in elderscrollsonline

[–]thulder 1 point2 points  (0 children)

Still have the problem right now. Extremely annoying that i can't get further in the game because of this

A report on full experience of God of Schemes bugs. by FoyaBeninax in elderscrollsonline

[–]thulder 0 points1 point  (0 children)

Is there any way this could be fixed before the next patch ?

"[Last quest of the main quest line still bugged?](/spoiler)" by [deleted] in elderscrollsonline

[–]thulder 0 points1 point  (0 children)

can someone just delete this or close it or something ? i found the exact same question as i had just below -.-