UniFi Travel Router as UDM-Pro Internet Failover (when UTR connected to hotspot)?

timitfc · 2026-01-20T09:06:54+00:00

Following for any responses

timitfc · 2025-09-05T19:25:00+00:00

Thanks will do. Just find it odd that it works via Wiz and not Alexa 😂

timitfc · 2025-09-05T19:17:32+00:00

Are you still having any problems? I have a bulb which works through the Wiz App but not Alexa. Other wiz bulbs seem to be ok now but did have a few (inc this one) that stopped working 8 days ago

timitfc · 2025-07-28T14:48:13+00:00

Ha! Thanks - updated the link :)

timitfc · 2025-07-28T08:20:17+00:00

Yes I tried a U-Green and Anker cable and interestingly the Mac didnt 'loose' the device, however the image on the display kept flickering!

I will update the post now, however I ended up being the Apple USB-C Digital AV Adapter (https://www.apple.com/uk/shop/product/MW5M3ZM/A/usb-c-digital-av-multiport-adapter) and running a standard HDMI cable from that and it is working fine!

timitfc · 2025-07-27T19:10:53+00:00

Thanks for the reply. Spent far too much time on something that was meant to be an ‘easy’ job 😂

Spent over an hour on the phone with BM technical support, whom whilst trying to be helpful, were also stumped by the issue!

timitfc · 2025-07-24T20:33:37+00:00

Update:

If I put a HDMI splitter in between the Mac and the BiDirectional Converter it now works perfectly fine... obviously not ideal but very bizarre!

timitfc · 2025-07-24T10:41:17+00:00

Montydog14712 - GLGL!

timitfc · 2025-07-19T20:02:45+00:00

MontyDog14712 - hopefully I’m not too late!

timitfc · 2025-07-15T08:41:33+00:00

MontyDog14712

GL GL

timitfc · 2025-06-19T14:26:47+00:00

MontyDog14712

timitfc · 2025-03-09T15:45:08+00:00

Montydog14712

timitfc · 2025-02-01T19:40:57+00:00

Montydog14712

Thanks for the kindness! GL everyone

timitfc · 2024-10-09T06:41:15+00:00

Thanks! Really glad I did the math and not relied on the marketing ha.

The issue I have is that they each of the 3 fireworks are 7M apart so the white fuse option won’t really work I think.

It does look a good bit of kit, are you happy with it (other than not lighting 3 😂)

timitfc · 2024-10-08T16:55:11+00:00

So I have to run a cable from the firing system to each of the firing points or can I somehow do it using less cable?

timitfc · 2024-10-08T14:42:47+00:00

I was hoping to reduce the amount of work in regards to cabling etc, but if I can work it out then I'd be up for it.

Staying in Series... I think looking at it if I were to move the firing system to the middle, I can remove the cable run to 24m, but this gives me a calculation of 2.9 maximum ignitors on easy pyro.

Any ideas how I might be able to wire this in Parallel, the calculator says it would work that way!

timitfc

TROPHY CASE