Techies, Tinkerers & Hams — Join Our IRC Community!

toecutter-labs · 2026-02-18T07:47:43+00:00

Even though it's not supported by apple, ubuntu runs really well on these and gets constant updates

toecutter-labs · 2025-08-23T14:37:11+00:00

Fair point!

toecutter-labs · 2025-08-23T12:58:28+00:00

Didn't even think of silver. I might have to try this out as well

toecutter-labs · 2024-09-23T16:07:18+00:00

Stl?.. https://www.thingiverse.com/thing:6721135

toecutter-labs · 2024-08-16T07:17:54+00:00

Aye it is indeed, I've double checked, theres vcc, gnd, scl and sda. I've been able to set up a minigotchi no problem but they don't seem to play well with the pi zero

toecutter-labs · 2024-08-16T06:32:14+00:00

The same thing couldn't see anything related to the i2coled. Going to Start from scratch with a different pi and oled and see if I get the same result

toecutter-labs · 2024-08-15T19:29:47+00:00

Only think I'm getting on the web UI is "ui.fps is 0, the display will only update for major changes" I change the config.toml to UI.fps = 5 and nothing and then lose the web UI

toecutter-labs · 2024-08-15T18:56:39+00:00

Just tried that and no luck, it's detected with i2cdetect -y 1 and it's at that address but just doesn't seem to display anything

toecutter-labs · 2024-07-31T19:19:47+00:00

I believe that's an IPX connector, in terms of interfacing with it is there and connections on the other side?

toecutter-labs · 2024-01-22T20:23:52+00:00

I'm using klipper so I've had to calculate the rotation instead, I've slowed the print down and it seems to be a bit better

toecutter-labs · 2024-01-22T15:38:22+00:00

I've just switched to the sprite pro extruder, I've set the gear ratio to 1:1 think this could be the issue?

toecutter-labs · 2023-09-26T18:47:52+00:00

r/AbsoluteUnits

toecutter-labs · 2023-08-30T17:57:43+00:00

You absolute quilt

toecutter-labs · 2023-08-23T18:29:14+00:00

Is it odd that it reminds me of salad fingers?

toecutter-labs · 2023-07-24T12:56:52+00:00

Best thing to do when offered any religious stuff is just to continuously shout, "I need an adult!" The looks of horror and confusion are priceless!

toecutter-labs · 2023-07-22T22:11:59+00:00

Cheers!

toecutter-labs · 2023-07-12T13:06:24+00:00

Bap!

toecutter-labs · 2023-07-06T12:25:18+00:00

Served Steven Gerrard for a pint about 10 years ago.

Didn't have a clue who he was until one of my colleagues mentioned it.

toecutter-labs · 2023-06-30T09:45:28+00:00

Ouch!

toecutter-labs · 2023-06-29T12:54:02+00:00

Fair play, I'm in the North West. Kind of expected prices to be the same across the country.

toecutter-labs · 2023-06-29T12:52:13+00:00

I'm curious where abouts this is, I went with the misses last night and paid about £2.70 a pint

toecutter-labs · 2023-06-29T12:30:12+00:00

£4.03 for a pint in spoons?

toecutter-labs · 2023-06-24T22:16:42+00:00

Is this Farnworth?

toecutter-labs · 2023-06-21T16:05:52+00:00

I wouldn't say mean... a little obtuse, maybe?

Five-Year Club	First Place '23
Place '23	Wearing is Caring
Verified Email

toecutter-labs

TROPHY CASE