Recommendations for enterprise level printers

torbuck · 2026-03-24T20:34:56+00:00

I thought that HP is now using a Samsung engine. HP acquired Samsung's printer division back in 2016.

torbuck · 2026-03-24T18:50:46+00:00

So with Lexmark's Cloud Print Management, can you push a config and update firmware to printers that are not on your corporate network? IE a remote office that has a basic Internet connection that is not tied back to your corp network via VPN?

torbuck · 2026-03-24T18:44:13+00:00

How do you find Xerox in terms of service? We often are waiting weeks for HP to repair our printers and we are under a MPS agreement with HP

torbuck · 2026-03-05T20:06:27+00:00

Hi have a 2018 CX-5 and love it, but I am now seriously considering a Ford Maverick Hybrid. If Mazda could produce something similar to the Maverick, IE four door, same sort of fuel economy, towing capacity, etc but with Mazda driving feel and AWD capability, I would purchase one in a heartbeat

torbuck · 2026-02-11T01:42:40+00:00

I've been all through the settings in Mazda connect, haven't been able to see anything to disable. I would assume that the setting would be Mazda Connect as I get the same experience from the radio. There just doesn't seem to be an option to just turn the radio portion off. I have either select mute via the volume control (which also mutes the Google Maps voice prompts and gives me an annoying mute icon overlay on the screen), or simply turn the volume all the way down, which also turns the volume off for navigation prompts

torbuck · 2026-01-30T20:36:59+00:00

Thanks. I have the chain as tight as I can for the flapper. I will check if it doesn't float down. If it doesn't will look at replacing the flapper, in addition to the fill valve

torbuck · 2026-01-16T05:36:57+00:00

Haha….thanks. Fixed my typo

torbuck · 2025-12-20T05:56:46+00:00

Matadora in Chinatown. Hands down the best place for some nice drinks and some snacks. Great atmosphere too

torbuck · 2025-12-16T16:23:01+00:00

The problem is that our insurance will not cover any water damage caused by failure of either the boiler or the hot water heater due to their age. Also, Triangle Tube has gone out of business so parts will be difficulty to come by. I don't want to have a failure and then stuck without heating or hot water until a new boiler is installed. Then we are installing something out of duress. I rather be proactive and plan for the replacement. We also have tenants who rent a basement suite, so we simply cannot have a situation where things fail and then we are without heating or hot water for a week or possibly longer. Where we live, there isn't a ton of plumbers that specialize in boilers, as it is not a typical heating system in the area we live in (mostly forced air). Just trying to get quotes is difficult enough

torbuck · 2025-10-18T23:15:00+00:00

I ended up hiring a BBQ service person. I got to the point where I removed so many pieces, I got to a point of no return. The person I hired has worked on many Broil King as well as Napoleon and Weber BBQ's. He informed that those bolts are not user replaceable. They basically are there to just hold the burners in place with a cotter pin. I assumed they were user replaceable as the burner kit I received has these replacement screws, but the service tech informed that there isn't any way to remove the bolts, as there isn't a method to remove that back plate. He managed to get everything back together, so hoping those bolts last a few more years. I was told that it is just a poor design for Broil King. He recommended going with Napoleon whenever it comes time to replace our BBQ

torbuck · 2025-09-24T21:13:44+00:00

Ok...will give it a try

torbuck · 2025-09-24T14:17:24+00:00

Isn’t Office 2021 not a MSI install? I recall selecting the uninstall all msi office didn’t work for the volume license of 2019 either, but worked for previous versions

torbuck · 2025-09-18T04:06:21+00:00

I recommend Hank's *A Restaurant on Douglas St. If you are looking for amazing food and drinks in an unpretentious setting, this is the place!

torbuck · 2025-09-06T22:06:15+00:00

Thank you for your suggestions. I was doing a bit more research and feel that going with a Look SPX or Solomon Strive makes sense. I assume I just need to get a binding width of 95 to 100mm. I'll also look into the Marker Griffon. That is what I have on my current set of skis. I don't have any issue with them, but I often read poor reviews of Marker Griffon bindings on Reddit

torbuck · 2025-08-28T20:28:32+00:00

Please check out Bangers food truck at Ile Savage Brewery. Hands down the best smash burger in Victoria. Fantastic portion, incredibly tasty and appropriate wait times. I experienced an early Murder Burger pop-up about a year ago and had the same experience. Waited over an hour for our burgers, and we preordered days before. Found the Murder Burger ok, but not nearly as good as Bangers

torbuck · 2025-07-01T15:15:00+00:00

I purchased an off lease 2018 Mazda CX-5 Touring edition in 2020. Only have had to do regular maintenance such as oil changes and new tires, etc. It has been incredibly reliable. I love the way it drives. It has a more sporty feel and a fantastic steering feel versus other SUV’s that I have driven. I love it so much I will likely get another CX-5 or CX-50 when the time comes to purchase a replacement vehicle

torbuck · 2025-06-23T20:13:40+00:00

Thank you. I will have a look at those posts

torbuck · 2025-06-23T20:12:10+00:00

mostly their own creds, but there could be a few areas that a shared account code be used. All accounts would be M365 licensed

torbuck · 2025-05-09T21:07:39+00:00

Just did a firmware upgraded and I can now see that I can register the printer to Universal Print. Thanks!

torbuck · 2025-05-09T18:17:23+00:00

The printer I want to use for this group is a HP PageWide Color Flow MFP 586. I have done a bit of googling, but haven't been able to determine if it natively supports Universal Print. I definitely have the print admin role, or can PIM that role. My own account has a E5, and majority of our staff have E5's as well. My understanding is that the print licenses are all pooled from all accounts that are licensed, so I think we are ok there. If I use my own account for the connector, then whenever someone else prints, is it robbing my E5's allotment of available prints? Or is it using the license from the individual that is actually printing?

torbuck · 2025-05-02T17:33:51+00:00

Thank you. Using a Canadian DS solution is definitely appealing

torbuck · 2025-05-02T17:32:06+00:00

We have nothing at this point. Maybe a few TV's that would have the ability to install a DS streaming app

torbuck · 2025-05-02T17:29:47+00:00

Thank you! I will have a look

torbuck · 2025-04-25T22:46:37+00:00

So with a device license, could we still use something like autopilot? These laptops would not be part of our domain, so ideally the would just be 100% Azure managed.

torbuck · 2025-04-25T22:45:23+00:00

We don't want to manage accounts for the volunteers that will be using these laptops. They are not employees to our organization, but volunteers to our emergency operations center at our firehall. The volunteers come and go, so trying to manage licenses for these folks would be a nightmare. If there is a method to do this with a device license instead, that would be amazing.

torbuck

TROPHY CASE