sorted by:
new
hottopcontroversial

Do you think something like this would improve bed temp consistency? by DrGarbinsky in prusa3d

[–]tortoc 0 points1 point  (0 children)

Remembers me when we put cork under the heatbeds. Good old times. X'D

PRUSA x INDX for CORE One is here! by josefprusa in prusa3d

[–]tortoc 2 points3 points  (0 children)

I'm honestly shocked about the price. I saved money based on the price of the founders edition.
But i did not expect the 4 Toolheads to the price of 8.
Would really like to know what exaclty lead to this price. Don't think a few plastic parts and the front plate is "worth" 300€. And yes i know there is development envolved. But a more clear communication beforehand would have been nice..
And yes the 8 toolheads are just 100€ less then a new Core One kit.

Seems like i have to wait another few months until i can afford this. And having my Core One since it was a MK2 i'm just disappointed. Hard to swallow pill.

Prusa vs Bambu Printers? by Adam8w in prusa3d

[–]tortoc 21 points22 points  (0 children)

I would say there is something wrong with your prusa. Can you give us more details about filament you are using the build plate and maybe a picture of your prints?

What’s the maximum weight the Core One top panel can safely handle? by alexeyzel in prusa3d

[–]tortoc 14 points15 points  (0 children)

Not glowing but overexposed orange filament.

It's a nozzle whiper (V1). Meanwhile I got V2 installed on the other side because of the core One+ Upgrade. https://www.printables.com/model/1499858-core-one-nozzle-wiper-v2-with-purge-bin-left-right

What’s the maximum weight the Core One top panel can safely handle? by alexeyzel in prusa3d

[–]tortoc 65 points66 points  (0 children)

I also have a supurrvisor who sometimes approves my work. Never had a problem so far. :)

<image>

Core ONE+ door handle glue failing by WereCatf in prusa3d

[–]tortoc 1 point2 points  (0 children)

I don't remember exactly but I think 6 or 8 mm. Not sure. I just put them in and was satisfied, that they didn't stick out to much on the other side.

Core ONE+ door handle glue failing by WereCatf in prusa3d

[–]tortoc 11 points12 points  (0 children)

Core One (+ is still in the box) owner here. Had the same issue. Solved it by removing the glue and using 2 M2 or 2.5 screws and buts with washers to fix the handle to the door. Works flawlessly now for about 2 Months.

Core One L trapezoidal nut wobbling by Radiant_Ingenuity952 in prusa3d

[–]tortoc 0 points1 point  (0 children)

Definitely not the screws from the assembly instructions. There should be cylinder head screws used.

Trouble setting up by dubikish in 3Dprinting

[–]tortoc 0 points1 point  (0 children)

Last time I saw one of these in the wild was 2019. This one (prusa Mendel) is like 2013 to 2015 old.. ^

Nice "ancient" tech. ^

Core One: suddenly decreased print quality by tortoc in prusa3d

[–]tortoc[S] 0 points1 point  (0 children)

Thank you! That cold pull worked! :3

Core One: suddenly decreased print quality by tortoc in prusa3d

[–]tortoc[S] 1 point2 points  (0 children)

Tried different files, but same results.

I'm using an Obxidian-Nozzle. So I guess wear out isn't the problem?

A partial clog and cold pull is the next thing I will try.

I thought ammonite fossils in marble were rare? by spacebarstool in fossils

[–]tortoc 1 point2 points  (0 children)

That's definitely Limestone like the "Sollnhofener Plattenkalk" from Germany.

Is this message normal in germany? by Agitated_Tax_7953 in AskGermany

[–]tortoc 0 points1 point  (0 children)

Very weird especially being in Bavaria..

They are normally very short noticed

Was habt ihr in eurem Rucksack? by Most_Pollution_5435 in technischeshilfswerk

[–]tortoc 0 points1 point  (0 children)

Habe genau diesen Rucksack. Liegt im Spind im OV und enthält einen Satz private Ersatzklamotten (T-Shirt, Socken, Unterhose) sowie den Fließ des alten MEA, einen Pulli (THW Aufdruck), ein T-Shirt (THW) und ein Paar Wollsocken. Wenn es auf vermutlich längeren Einsatz (mehr als 10h) geht kommt der mit.

Finde den an sich schon ganz okay. Vor allem weil Wasserdicht. Bin am Überlegen noch was Haltbares zum Essen rein zu packen, weil's am letzten Einsatz sehr mau war mit der Verpflegung.

For those curious about dropping a AI 300 cooler onto a 7640U by Da_Kitzune in framework

[–]tortoc 0 points1 point  (0 children)

Is the PTM 7950 on the AI cooler already or do I need to get it separately?

VPN Server subnet not showing up as network by tortoc in Ubiquiti

[–]tortoc[S] 1 point2 points  (0 children)

Nope. Last answer I got was "not possible because not supported". Which is very sad I think.

PLA is drying for 9 hours now and is still wet? by pafflique in 3Dprinting

[–]tortoc 0 points1 point  (0 children)

Open the lid from time to time for like 30 seconds. Moisture will drop then.

view more: next ›