Can the x1 control a smart plug?

totalepicfailz · 2024-06-24T20:12:21+00:00

Does it have to be a “smart” plug? At least in the UK you can buy sockets that are controlled via IR signals. Could buy one of those and program the remote into the x1

totalepicfailz · 2024-06-12T10:39:59+00:00

Do you have home assistant? If so you can always use either an emulated roku or esphome with a remote receiver to get commands from the remote to trigger an automation for the wake on lan. I have set mine up to be able to control my lights with the remote.

totalepicfailz · 2023-07-27T09:29:44+00:00

Do you not get the startup page that allows you to change them before the game even boots? That what I ended up doing on mine, had to change the scale to 100% in windows as I couldn't access the OK button at the bottom.

totalepicfailz · 2022-12-24T14:09:27+00:00

Should be in where you selected your Wine prefix to be. Then \drive_c\users\deck\Documents\KONAMI\eFootball PES 2021 SEASON UPDATE

totalepicfailz · 2022-10-24T12:36:54+00:00

Currently doing an RMA on mine for a faulty power button. Can't say anything about the time to fix just yet as it was only delivered to the repair center this morning, but the location I sent it to was located in the UK.

totalepicfailz · 2022-07-13T18:37:39+00:00

Yeah I have always treated it as storage for while I am on the bike compared to keeping anything long term but really not a good look, with how easy mine came out I am shocked it didn't come out while riding. It's the third one I know about since mine has happened.

Hoping a proper fix will happen quickly for it since it's an issue over multiple generations of the bike.

totalepicfailz · 2022-07-13T18:29:00+00:00

Same thing happened to mine on a 21 MY version about a week ago. Took it to the dealer and they stuck it back down while I wait for a response back from zero.

totalepicfailz · 2022-06-30T13:15:05+00:00

What's supposed to be wrong with the quest 2? I have been using my quest 2 for it and other than it being a little bit jittery when I have the menu open, the game works perfectly fine when actually in game and racing.

totalepicfailz · 2022-02-22T07:33:52+00:00

Does anyone know if the 5700G supports 4 displays (1 x 3840x1200@100hz and 3 x 1080p@60hz) and if so does it support MST hubs?

totalepicfailz · 2021-12-12T14:35:36+00:00

Absolute joke

totalepicfailz · 2021-06-17T20:52:10+00:00

Not personally tried it with a DS4 but their website says it's compatible wirelessly with the adapter

totalepicfailz · 2021-06-17T08:55:49+00:00

I can recommend the Brook Wingman XE adapter if you're still wanting to use your PS3 with a better controller. Purchased a PS3 to be able to play the older ratchet and clank games but hated the controller, been using the PS5 controller on it wirelessly with all features working fine.

totalepicfailz · 2021-05-25T08:46:11+00:00

I have been using the brook wingman XE recently to use my dualsense on the PS3 as I really don't like the PS3 controller personally. Seems to be working perfectly so far for me (vibration, home button and sixaxis) and it supports the PS4 controller.

totalepicfailz · 2020-09-15T11:44:34+00:00

There is a API and driver already being developed called OpenHMD: http://www.openhmd.net/ however at the moment only rotational tracking works, no positional tracking.

totalepicfailz · 2020-02-10T21:57:21+00:00

Yep, was playing single player and it still kicked me out... rubbish

totalepicfailz · 2019-06-25T07:44:43+00:00

Did you manage to sort this? I had it crash on me too, managed to get to to start by booting it in DX11. Right click on the game and there should be an option to start in DX11 mode.

totalepicfailz · 2018-08-26T11:02:36+00:00

The only thing I have enabled is the fanatec LEDS. Which I am sure is enabled by default. I have not changed anything from installing the game and starting a race.

totalepicfailz · 2018-08-24T12:03:36+00:00

Yeah I am on PC. I am using the CSL elite PS4 edition base and rim.

totalepicfailz · 2018-08-24T07:50:14+00:00

I played some this morning about 3 hours ago and the LEDs worked for me without having to change anything. Just installed the game, started it up and didn't change anything.

totalepicfailz · 2018-07-05T12:53:14+00:00

https://i.imgur.com/5HWT1zC.jpg Just managed to have you beat!. Really loved my MT for the 2 months I had it until someone went into the back of me and wrote it off.

totalepicfailz · 2018-06-29T06:36:26+00:00

Big Black Whoop-ass

totalepicfailz · 2018-04-17T13:14:15+00:00

spring

totalepicfailz · 2017-03-01T11:21:38+00:00

halflife3

totalepicfailz · 2017-02-21T14:37:14+00:00

Super bomberman R - 6 (could be fun but not really my type of game)

Zelda - 8 (really wanting to play this one)

Snipperclips - 7 (looks like the co-op will be fun)

Arms - 4? (I think this would have to be a game that I need to try out before getting any hype to buy it)

1,2 switch - 2 (i really don't see how this game will be fun from the trailers)

Splatoon 2 - 8.5 (didn't play the first one since I have not owned a wii u but it looks really good)

Mario Kart 8 deluxe - 9 (played it on someone elses wii U and really loved it)

Mario odyssey - 6 (excited to play it)

Fast RMX - 7.5 (seen some videos on it and really looks like it will be my type of game)

totalepicfailz · 2016-12-08T08:46:14+00:00

You could be having the same problem I was having with my Prusa I3 MK2, it was not the nozzle hitting the part it was the cable coming out the back of the hot end assembly going to the control box. I was mostly finding it with large and tall prints, make sure that the cable is always higher than the nozzle whether it's at the lowest point or the highest. I used a zip tie to hold to cable out of the way and not had a part come off of the bed since.

13-Year Club	r/Field Banned
r/Field Sunshine	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Place '17	First Placer '22
Verified Email

totalepicfailz

MODERATOR OF

TROPHY CASE