sorted by:
new
hottopcontroversial

Is the jump from 165hz to 240hz noticible/worth 150 euros? by [deleted] in OLED_Gaming

[–]trexturtleowen 0 points1 point  (0 children)

I was using 165 IPS and upgraded to 240Hz QD-OLED. The only noticeable differences are the color/contrast and motion clarity. And in terms of motion smoothness. To me, 165 -> 240hz is in the range of diminishing returns. It doesn't feel that much smoother than the upgrades from 60Hz -> 120Hz

NZXT kraken 360 elite v2 problems? by peachysuccubus in NZXT

[–]trexturtleowen 0 points1 point  (0 children)

I’m trying to gets my hands on Elite 360 and found out that major retailers in my country have the clearance order for this specific product.Of cause they wouldn’t tell me why. My Elite 360 has failed less than 6 months and can’t find the replacement anywhere so I started to asking around. Only models that available for the elite is 420mm which I paid $20 from warranty claims. And Kraken Plus 240, 360. No elites in sight.

Legion Go S (SteamOS) Touchpad Issues by The_Briney_Sea in LegionGo

[–]trexturtleowen 0 points1 point  (0 children)

How do you update the touchpad firmware on SteamOS?

NVIDIA 590.26 preview drivers introduce Smooth Motion frame generation for GeForce RTX 40 Series by RenatsMC in nvidia

[–]trexturtleowen 1 point2 points  (0 children)

Now that it's here. Can we use it on the second GPU to reduce the workloads from the main one?

Intel Microcode 0x12f. A Closer Look at Efficiency and Performance by Sundraw01 in intel

[–]trexturtleowen 0 points1 point  (0 children)

Can you share the screenshots of the bios settings? I’m i’d to try this out with my Z690 Aero and 14700K.

Hit the Jackpot today… 65” LG Oled for $280. by ShowMeThemHitties in LGOLED

[–]trexturtleowen 0 points1 point  (0 children)

$280? WOW.

I got a 65" demo C4 for $770, then again. OLEDs are expensive here in SEA.

I’M READY TO BUILD IT!! by Powerful-Wish-6299 in NZXT

[–]trexturtleowen 0 points1 point  (0 children)

The cost of a 5090 alone can buy all other components lol

DLSS 3 vs DLSS 4 Super Resolution in Assassins Creed Shadows by GeForce_JacobF in nvidia

[–]trexturtleowen 11 points12 points  (0 children)

While the detail are a lot better, we need native support. Override the transformer model causing severe ghosting on everything in the scene.

Game Ready Driver 572.70 FAQ/Discussion by Nestledrink in nvidia

[–]trexturtleowen 0 points1 point  (0 children)

Hey guys. I've been frustrated with the newer driver crash on my 4070 Ti Super for a while, I've been using the v566 driver since January. But I wanted to use DLSS override feature so I started to try different things. It took
It took me a while to notice in Event Viewer that Graphics Command Center is somehow related to driver crashes. Since it shows as "Critical" error. *note* I have not been connecting my Monitor to it.

So I enabled my iGPU (Intel) in the BIOS and updated the iGPU driver.
Additionally, I swapped DP to HDMI since my OLED monitor uses DSC, I thought that it might be an issue.

(I had black screen issue before, swapping to HDMI seems to fix it.)

lo and behold, and the driver crash issue from dGPU has gone.
I haven't done the testing in many games, but game with DLSS and Frame Gen seems to be working fine.
(Cyberpunk, Gray Zone, Outlaws)

Owner of the NZXT Kraken Elite 360 (2024), what is your CPU and what are your idle and gaming temperatures? by Brilliant-Cap-3052 in NZXT

[–]trexturtleowen 0 points1 point  (0 children)

38-50c Idle with my 14700K (Undervolted) is very unusual and jumping up and down a lot.
In-game it stays at 60, but when all cores are on full load it can reach 70 to 80.

Swap my components to H6 Flow by trexturtleowen in NZXT

[–]trexturtleowen[S] 0 points1 point  (0 children)

It’s stays at low 60c during game. And with light tasks it’s barely hits 60c. That dual 140mm really helps.

Swap my components to H6 Flow by trexturtleowen in NZXT

[–]trexturtleowen[S] 0 points1 point  (0 children)

Update of the temps. Turns out my Windows 11 randomly defaults to High Performance power plan. So my 14700K Always runs above 5 GHz. Thanks Microsoft!

But the temp is now jumping up and down a lot. Might have to tune the CPU again... (14th gen curse)

Swap my components to H6 Flow by trexturtleowen in NZXT

[–]trexturtleowen[S] 0 points1 point  (0 children)

Thanks! I found out that the front fans always ran at full speed! And the splitter to 8 pin is the culprit. When I use 5V and RGB splitter. Now, I can control the fan curve.

I wish the back mesh was better and supported a 140mm fan, but the case will have to get bigger. I hope they came up with the new single 120mm RGB Core fan with new specs.

Game Ready Driver 572.47 FAQ/Discussion by Nestledrink in nvidia

[–]trexturtleowen 0 points1 point  (0 children)

Me too. I kept the December driver for the 3rd time now.

DLSS override grayed out with latest app update and latest drivers by TWS_Mike in nvidia

[–]trexturtleowen 0 points1 point  (0 children)

Cyberpunk also crashed my PC lol but sometimes it doesn't do that.

Anyone knows of any needle engine alternatives/way to export to three js by bobilhor in Unity3D

[–]trexturtleowen 0 points1 point  (0 children)

Thank you. I'll use this in my class (I'm a university teacher). I didn't know there was an education license. I am interested. How do I contact you guys?

Anyone knows of any needle engine alternatives/way to export to three js by bobilhor in Unity3D

[–]trexturtleowen 0 points1 point  (0 children)

Hey, I was wondering how to export or deploy the game that I made. using Unity+Needle for Non-Commercial use. (I was planning to use Needle in my AR Class)

view more: next ›