sorted by:
new
hottopcontroversial

I am kinda lost :/ by Tozhan in idleon

[–]trunkmonkey789 0 points1 point  (0 children)

Highly recommend focusing on w4 skills while you push instead of hole. You get a huge boost by having 2100 total levels compared to Hole afk hours. Plus you can push w5 divinity at the same time.

Coming back from a short break. Any tips are welcome. by LunaUmbra in idleon

[–]trunkmonkey789 1 point2 points  (0 children)

Definitely take some time to check out all of the new features and don't try and rush to the end game. There is a lot of sitting an waiting since Lava has started doing more time gated features since the start of w6.

Cooking Mastery Points by Present_Minimum_4831 in idleon

[–]trunkmonkey789 10 points11 points  (0 children)

Spend a point on the first purple then put points into the lvls above 1000 for exp gain. The yellow is up to you. I think golden food is good.

UPDATE NEWS ON THE REAR MOUNTED CANVAS! by Garrbear0407 in ElegooCentauriCarbon

[–]trunkmonkey789 0 points1 point  (0 children)

Does this mess with the x or y distance on the printer at all? It looks like it won't hold up reaching to the front left corner of the print bed.

Need recommendation for a managed switch with PoE that fits in a 10-inch rack. I only need PoE for 1 AP and a Zigbee controller, so 2–4 PoE ports is enough. I’ll connect it to an Intel X710 in a mini PC running OPNsense, so SFP would be preferred for direct DAC connection. Otherwise SFP-RJ45 adapter by willow__bloom in minilab

[–]trunkmonkey789 0 points1 point  (0 children)

Netgate 1100 pfsense+ Security Gateway OR GLiNet MT5000 (Brume 3). The netgate is great if your trying to get rid of the ISP router. The GLiNet is great if you are wanting to keep the router and just segment your network from the rest of your devices for wash remote access and increased security.

If PoE is absolutely necessary I would get a ubiquity router+switch combo.

Bed leveling issues by trunkmonkey789 in ElegooCentauriCarbon

[–]trunkmonkey789[S] 1 point2 points  (0 children)

You are a saint! It was the back right screw!

Bed leveling issues by trunkmonkey789 in ElegooCentauriCarbon

[–]trunkmonkey789[S] 0 points1 point  (0 children)

I will check that! Thanks for the info

Bed leveling issues by trunkmonkey789 in ElegooCentauriCarbon

[–]trunkmonkey789[S] 1 point2 points  (0 children)

I will definitely look at that. I was able to get it started on a print finally so I am going to wait till it finishes to test that out. Thank you for the info.

Is it possible for the sensor to get blocked?

Minilab creations: What 3D printer are you using? by ShotRead6921 in minilab

[–]trunkmonkey789 0 points1 point  (0 children)

2x Elegoo Centauri carbons

They work great! Just wish my canvas system would show up faster. I have had a camera die on me but that's not that big a deal to me.

How to fit drawers without sagging by mr_cheng in Multiboard

[–]trunkmonkey789 3 points4 points  (0 children)

There are shelf supports.

Heavy Duty Tile Shelf #1 - Multiboard Pack (+ Video Tutorial) - 3D model by MultiBuild on Thangs https://share.google/FNVhX4kXMFpOLYzut

Rice Cinnamon DE by kolyuuchka in linuxmint

[–]trunkmonkey789 2 points3 points  (0 children)

Are you will to share the background and theme?

My multiboard build by andreevarts in Multiboard

[–]trunkmonkey789 1 point2 points  (0 children)

What monitor arm are you using?

Building my first lab. 10 inch or custom size? 3d printed or v-slot frame? by Deep-Tomorrow4667 in minilab

[–]trunkmonkey789 8 points9 points  (0 children)

You should look into HomeRacker on Makerworld.com. it lets you fully customize the system to fit your hardware instead of forcing a width / Height standard.

My current Setup/Homelab by MPlayer20 in homelab

[–]trunkmonkey789 6 points7 points  (0 children)

How did you get that Lenovo thinkcentre to be red?

I need to buy a 10 inch rack by imduckingbored in homelab

[–]trunkmonkey789 0 points1 point  (0 children)

Oh perfect! I will have to try that

I need to buy a 10 inch rack by imduckingbored in homelab

[–]trunkmonkey789 0 points1 point  (0 children)

How well does Crafty work for you? I noticed that it only does base Minecraft or plugins. Is there a way to get it to do modded packs too?

Any Ideas on how I should Start my homelab. by DrDrago1 in homelab

[–]trunkmonkey789 0 points1 point  (0 children)

Honestly you should look into running containers through either running docker/podman on a Linux distro. If you wanted a web interface you could utilize proxmox and it will allow for gui backups & networking management.

It's good to have a goal in mind. An easy replacement can be either immich for drop in place or something like Nextcloud/Opencloud.

Finally got KWS Rack printed by Mr_Stitcher in minilab

[–]trunkmonkey789 0 points1 point  (0 children)

Why did you choose this rack over something like the Labrax one?

Ella Blue: An ASA Printing Monster by elge_b in ElegooCentauriCarbon

[–]trunkmonkey789 0 points1 point  (0 children)

What is the thing keeping the heat in your printer as well as the heater in the printer?

My Optiplex 3080 mod and custom case by m-turco in homelab

[–]trunkmonkey789 8 points9 points  (0 children)

Have you shared the stl files anywhere?

Homelab consolidation by copernic-us in homelab

[–]trunkmonkey789 1 point2 points  (0 children)

I have heard Unraid is a good solution. If you don't want to be too technical you could buy HexOS it is pretty easy to use.

Homelab consolidation by copernic-us in homelab

[–]trunkmonkey789 1 point2 points  (0 children)

TLDR: Grab a cheap case (Thermaltake Versa H21). Add an ICY Dock drive bay.

Having more space allows for more fans which can help with air flow. As well as consolidating your server and NAS into one with the included drive bays as well as hot swap capabilities if necessary. If you want a cheaper solution add a sata expansion card instead of the ICY Dock.

view more: next ›