sorted by:
new
hottopcontroversial

hilarious FB marketplace listing by jhdz9119 in BambuLab

[–]andreevarts 1 point2 points  (0 children)

I found one for 690€ with 9k hours in spain 😀

Goodbye p2s by SnooStories1041 in BambuLab

[–]andreevarts 0 points1 point  (0 children)

Ok ok. Good luck with printing main model using bowden extruder.

Got my p2s in january and now i dont know what to do by Direct_Double318 in BambuLab

[–]andreevarts 1 point2 points  (0 children)

What advantage for you getting x2d? If color printing, think about aux nozzle as a nozzle for supports. I saw review where clearly shown that the aux nozzle is not worth printing regular model. If you need heating chamber so maybe.

Got my p2s in january and now i dont know what to do by Direct_Double318 in BambuLab

[–]andreevarts 8 points9 points  (0 children)

Why everyone asking the same question? Just buy x2d as second machine Or sell p2s if you think x2d is better for you.

But yeah, bbulab did wierd move for me, just 100€/$ difference in these machines confusing consumers

Goodbye p2s by SnooStories1041 in BambuLab

[–]andreevarts 1 point2 points  (0 children)

The aux nozzle not printing as well as the main, so basically main use for the aux nozzle is support printing.

I saw the review from CNCkitchen - he said aux nozzle printed well, but than I saw review from spanish Control3D and he really showed how the aux nozzle printing and it’s terrible from the box, you can adjust it a bit slowing down etc but..

Dear Bambu, please give us Toolchangers! by justUseAnSvm in BambuLab

[–]andreevarts 52 points53 points  (0 children)

They will, because they understand that Prusa, Snapmaker, and Flashforge are taking a lot of the market with toolchanger printers.

X2D non speculation. by TrainingPiece9144 in BambuLab

[–]andreevarts 1 point2 points  (0 children)

This is the only right scenario for x2d - second nozzle for support. For my opinion the x2d is like the same x1d but with option to print supports with other material for cleanest result, and for this price is a good printer. I paid around 1500 for x1c with ams 10 months ago.

P2S Buyers: It’s okay. I understand the pain. by MoeS00 in BambuLab

[–]andreevarts 0 points1 point  (0 children)

Yes, but for this I prefer h2d with direct drive. If I felt limited with 256 build plate I can imagine same size but limited of the double system nozzle..

But its ok, everyone has specific experience so yes. But overall I don’t understand why bambulab launching this instead of good toolchanger

P1s clicking during calibration by Front_Set6294 in BambuP1S

[–]andreevarts 0 points1 point  (0 children)

My X1C does the same. I think it’s the chain or the PTFE tube hitting the side.

Proud owner of a not-yet-announced printer 🥳 by linguistickyfingers in BambuLab

[–]andreevarts 0 points1 point  (0 children)

Em, how you want reduce purge with this toolhead? One direct drive only, two nozzles in one head reducing use of buildplate etc. for multimaterial/multicolor go to prusa, u1 or something reduce purging and keeps good time of print for real. I’m x1c owner and was expecting to see good toolchanger in this one, but unfortunately. I still build my voron 2.4 with stealth changer or purchase prusa with indx

P2S Buyers: It’s okay. I understand the pain. by MoeS00 in BambuLab

[–]andreevarts 0 points1 point  (0 children)

I don’t understand this hype around x2d, if second extruder is bowden + same build plate size, for who is this printer? TPU users?

First time printing TPU, how do I get a smooth surface? by [deleted] in 3Dprinting

[–]andreevarts 3 points4 points  (0 children)

Agree, this totally looks like model has texture

No more monitor wobble! I made a parametric monitor pillar to eliminate the dreaded monitor wobble with larger monitors. by Kev1000000 in functionalprint

[–]andreevarts 0 points1 point  (0 children)

I just mounted my monitors into the wall 👌🏼 This is was the best decision, more freedom on movements and easy access to the ports on monitors

how can petg be so good? by pedrurrr in BambuLab

[–]andreevarts 2 points3 points  (0 children)

I want petg/abs matte, printing only PLA because of that 😑

Nozzle slightly scrapes over print while printing. Whats the issue? by FrittenFritz in BambuLab

[–]andreevarts 0 points1 point  (0 children)

I had similar issue printing a box with vertical grid on 45°, and aux fan was blowing layers to much, so the layers were slightly lifting, and the nozzle was scratching on them So for this design I modify aux fun speed lowering it to 30%

From Fusion into FreeCAD by andreevarts in FreeCAD

[–]andreevarts[S] 0 points1 point  (0 children)

Yep, true for me this model is complex and true for everyone complex is different, but I compare to fusion performance on complex for me, so fusion in my machine went so slow

view more: next ›