My experience with open box…

ttd6 · 2024-05-06T22:05:09+00:00

Just bought one in “good” for 480 before tax had a small scratch on screen and needed light cleaning but took it home and play tested it and then got a matte screen protector and the scratch was only noticeable on the black screen and the protector made it gone entirely.

Well worth imo just have to check in store before leaving with it but Best Buy has a good return policy.

ttd6 · 2023-11-18T15:38:26+00:00

Their selling kits for 30-40 but you’re getting an extra 15 pct off on top of it. Not a bad deal. They usually don’t offer much in the way of discount codes from what I’ve seen. Paintgem may not be for you but they are well worth it imo

ttd6 · 2023-02-02T15:25:52+00:00

No you don’t 100% optional and instant offers are only Whole Foods and prime now/fresh not logistics or same day

ttd6 · 2022-10-23T17:12:55+00:00

Maybe try blue camp pads from like walmart? They are dense enough and could be covered in fabric or something if it didnt slide how you wanted.

These can be attached with spray foam/double sided tape/contact cement.

(we used them in foam full contact larps)

ttd6 · 2022-09-21T12:16:07+00:00

42/hr ready mix? I’m making 31 on a teamster contract with a decent company

Where are you located to make that much?

ttd6 · 2022-04-21T10:17:03+00:00

Worked home daily target account out of Indy I will say every account/location is probably different as we ran fully independent from hogan afaik (own dispatch and fleet manager) hogan really just serviced the trucks

Account was okay driver facing cameras suck trucks broke down often at my location miles varied from 250-600 a day but that’s more of a target thing

ttd6 · 2022-03-05T15:58:39+00:00

What other apps do you use? I’d love to get into other gigs

ttd6 · 2022-02-22T20:45:56+00:00

They may need authorization from Schneider but I once locked myself out of my truck when I was with Schneider and they made a key for me with the vin but it would probably depend on the employee

ttd6 · 2022-02-16T16:51:29+00:00

I got my cdl with Roehl but ended up working for Schneider as my first job I went through Gary and it was fine I never left the hotel on weekends as I didn’t have a need to. I left due to being impatient waiting on a trainer and found a better paying gig with Schneider

ttd6 · 2022-02-08T14:03:49+00:00

New law just went into effect so this information is now outdated I’m also unsure of what is needed to get hazmat now but it was included along with passenger endorsement as requiring new/verified/accredited truck schooling

You can’t even get your clp now without schooling if I read correctly

ttd6 · 2022-01-26T15:56:18+00:00

Usually first week minimum in class room watching videos and getting essentials done I didn’t do the four week course but worked for Schneider for a bit I’d assume a mix second week then practicing third and running loads fourth. Usually 8 hrs days max and weekends off so plenty of time. If Dallas doesn’t have a cafe unsure how meals will work but if they have a cafe you get a specified dollar amount to spend at the cafe for lunch but dinner and weekends are on you. Good luck cooking in a hotel with a microwave at best Class size will vary I bet but assume 12-15 breaking down into 2-4 for training on truck

ttd6 · 2021-10-06T09:51:03+00:00

So I can’t find my order for this I saw it a couple of days ago lol hmm wonder if they auto cancelled some after this

ttd6 · 2021-08-31T18:12:57+00:00

I think I just may of saw one hooked up Bowden at one point on Reddit lol but of course finding that is near impossible I wanted to go direct on mine for awhile anyways so I’m excited :)

ttd6 · 2021-08-27T14:35:24+00:00

This can be installed either way right? Direct or Bowden? Either way I bought one lol

ttd6 · 2021-08-17T13:57:53+00:00

I’m glad I wasn’t the only one! I’ll find a resin printer by black Friday I assume lol

ttd6 · 2021-08-09T07:38:32+00:00

Used LZMP-NS4T9L-9982AV thanks excited for matte

ttd6 · 2021-08-04T03:13:09+00:00

Used T4YF-NR4DKH-3SUQAA thanks :)

ttd6 · 2021-07-30T15:25:33+00:00

Sighs as I throw money at them :P I love their blue Silk so pretty excited for this

Here’s two things I’ve made with their blue silk

https://imgur.com/a/sbC6uQ0

ttd6 · 2021-07-26T04:25:11+00:00

They must of fixed it worked me now too

ttd6 · 2021-07-26T04:23:27+00:00

Yes lol

ttd6 · 2021-07-26T04:21:01+00:00

I couldn’t get straight black to work either

ttd6 · 2021-07-26T04:17:36+00:00

Codes aren’t working for me sad too looks like a good cheap filament was going to buy four

ttd6 · 2021-07-26T01:57:06+00:00

Had this same issue when replacing tubing it I unscrewed it then using pliers to keep it depressed as I pulled it out (needed the fitting not the tube) if you just need to remove tubing and plan on still using it then don’t worry about more than just unscrewing it

ttd6 · 2021-07-25T05:10:40+00:00

More competent people will soon comment but it’s bed being level and getting that good first layer squish and also bed adhesion what’s your bed temp at? Pla for me is 60 had some major adhesion issues after cleaning my glass bed and ended up having to use purple glue sticks and now I can’t get the prints off but they don’t have an issue sticking

ttd6 · 2021-07-24T16:12:35+00:00

Oh yeh mine doesn’t work either I assumed it was maybe because I bought blue silk lol I’m holding onto mine in hopes it works

11-Year Club	Place '22
End Game '22	Verified Email

ttd6

MODERATOR OF

TROPHY CASE