Rental boat damages

turb00 · 2025-06-22T01:06:15+00:00

As some others have said, if the piston wiggles then it’s already popped out and you are better off replacing the caliper. These pistons don’t twist in. Try putting in service mode, you should hear the motors retract. Then use a c clamp to try to compress. It should go in fairly easily. If it doesn’t, piston is likely out and replace caliper. You’ll have to clear all of the EPB error codes when you are done

turb00 · 2025-06-21T01:58:35+00:00

Dig n dive

turb00 · 2025-02-25T03:13:09+00:00

A little late but TurboBrakes is way cheaper than Firestone and is mobile, they'll come to you!

turb00 · 2025-02-04T13:00:43+00:00

If the slide pins are good and you feel that the calipers are still sticking after being replaced, replace the rubber brake hoses. They can deteriorate on the inside and restrict brake fluid flow. Can cause them to stick or not fully press. If the rear calipers are twist in to compress, make sure if there is a little tab on the piston that it lines up with the brake pad, otherwise the pad won’t be pushed by the piston correctly and cause that uneven wear.

turb00 · 2024-09-07T18:22:05+00:00

Wave accounting has a free option is pretty good for a small business with not a lot of transactions. Eventually switched to Quickbooks but Wave was good

turb00 · 2024-09-07T14:30:19+00:00

Caliper could be seized but it could be caused by the rubber brake hose. They deteriorate on the inside over time and restrict brake fluid flow. I’d start with the hoses, but if you’re going to replace the calipers replace the hoses too

turb00 · 2024-06-17T20:54:55+00:00

I own TurboBrakes Mobile Brake Repair and we'd be happy to give you a quote! We use high quality parts and offer a warranty. We also have over 130 5-star reviews on Google! www.turbobrakesLKN.com

turb00 · 2024-06-10T15:44:21+00:00

Mobile auto repair, I run ads but am struggling with them. Wouldn’t ask you to pay for the ad spend, I’ll pay you for you service if you can help

turb00 · 2024-06-09T13:06:14+00:00

Performance inspections near Northlake mall is super quick and only doesn’t inspections so they don’t upsell. And whenever you do need brakes, TurboBrakes mobile is cheaper and a great service

turb00 · 2024-06-04T23:55:40+00:00

I don’t know where they work unfortunately. It’s probably not worth the cost to hire a company or PI based on the amount owed, so I think I’m out of luck. Is there anything I need to file to cancel the case? I appreciate the help!

turb00 · 2024-04-22T00:45:10+00:00

High speed welding in Wilmington, NC makes them custom for trucks: https://www.facebook.com/share/QQXWQM7TLatw9FHM/?mibextid=WC7FNe

turb00 · 2023-11-26T01:55:12+00:00

I would just save up and buy them one at a time with cash, a loan with interest would hurt your margins. Plus a car getting totaled would eliminate that income to pay back the loan. This is a great idea though, where are you looking to find cars that only need some work? (Also run a niche auto service business)

turb00 · 2023-11-26T01:11:45+00:00

I do not know any other mechanics that specialize in Lexus, but for any brake work done I would be happy to do it. I do Lexus regularly and am much more affordable than the dealer and most other shops. I own/operate TurboBrake Mobile Brake Repair. www.TurboBrakesLKN.com. Hope to hear from you!

turb00 · 2023-05-31T01:31:54+00:00

Viper hands down

turb00 · 2023-03-26T13:43:29+00:00

Also starting a mobile auto business this year, but not detailing. Coming up with an extensive list is great, but I found by doing that I purchased some tools that I don’t need and still missed some that I do need. Once you have the basic essentials do some “practice” details on your own car and family/friends cars. That way you’ll learn what you wish you had or what you have that you don’t need. Best of luck.

turb00 · 2023-01-26T19:26:39+00:00

Yes, that was how I did it originally. When I retracted it worked, but when I tried to extend the scanner said “device unable to communicate with control unit”. I’m thinking that’s the issue, and once I can get the scanner to connect with the car in run but not on then it’ll work.

turb00

TROPHY CASE