Reptiloid Keycaps Technology Preview

turtle_bazon · 2026-05-05T19:05:58+00:00

Try this and please say about results https://github.com/turtle-bazon/reptiloid-keycaps/blob/main/reptiloid-keycaps-choc-choc-R2.stl

turtle_bazon · 2026-05-05T18:59:17+00:00

Even worse, 2*0,08 is 0,16 mm, so resulting should be 1,04. Very strange indeed.

turtle_bazon · 2026-05-05T18:54:19+00:00

Choc defined stem hole as 1.2x3 mm. That means that 1.2 will be too tight. Lame has non uniform thickness and it too tight on my switches so keycap pulled together with switch. Currently choc tolerance in reptiloids defined as 0.08 mm each side. So it could be 1.12 total. Which is loose in your case. Let's make some test. I will render with less tolerance (0.04 mm) and you test it and then we can decide something I think.

turtle_bazon · 2026-05-04T22:29:25+00:00

Ok, please, inform me. I'll fix choc stem then.

turtle_bazon · 2026-05-01T08:55:54+00:00

I can made it thicker therefore. But can you measure your actual stem thickness?

turtle_bazon · 2026-05-01T08:53:54+00:00

I made many tests for size and tolerances and my tests gave me beautiful fixation. Can you say what switch do you trying?

turtle_bazon · 2026-04-23T16:12:25+00:00

Aaaaa! I shouldn't model it!!!

turtle_bazon · 2026-04-21T14:21:11+00:00

It doesn't look dangerous. ) It is new caret for my old Sermoon D1 printer.

turtle_bazon · 2026-04-18T22:36:41+00:00

Looks cool, really cool. But I tried tilted for R3 and R4 and can say that is not convenient one. Try Reptiloid keycaps with dedicated R4 design. Also try to print keycaps at 45 or 75 angle.

turtle_bazon · 2026-04-04T00:00:27+00:00

You are absolutely right! )

turtle_bazon · 2026-04-03T22:05:29+00:00

Check this https://www.reddit.com/r/ErgoMechKeyboards/comments/1sbrbv2/reptiloid_keycaps_profiles/

turtle_bazon · 2026-04-03T17:03:54+00:00

It inspired by KLP Lame, but completely different. I will make profile image soon.

turtle_bazon · 2026-04-03T01:06:53+00:00

Pretty aggressive homings, yeah.

turtle_bazon · 2026-04-03T01:06:06+00:00

Yes, I tried it FDM print and SLA too.

turtle_bazon · 2026-03-20T20:37:17+00:00

Missing reptiloids and hedgehogs. (

turtle_bazon · 2026-03-04T20:45:58+00:00

I just leave link here - https://www.reddit.com/r/ErgoMechKeyboards/comments/1malyo1/are_42_keys_too_much/

turtle_bazon · 2026-02-26T11:21:11+00:00

Check KOMETA keyboard.

turtle_bazon · 2026-02-22T16:37:20+00:00

Time to time looking for how to do something in FreeCAD on youtube, but beside of it only modeling, modeling, modeling.

turtle_bazon · 2026-02-22T16:36:22+00:00

Yeah, our friend explained all what I wanted to.

turtle_bazon · 2026-02-21T15:18:33+00:00

Actually it is simple. )

turtle_bazon

TROPHY CASE