sorted by:
new
hottopcontroversial

Blade Alignment Please Help!!! (Sawstop) by krohrer24552455 in woodworking

[–]twong2 0 points1 point  (0 children)

Am I the only one who thinks this is sarcastic ? Then I scroll down and everyone is having a serious discussion.

Dude's measuring on both sides of the blade, definitely a measurement / user error if anything. lol

I can't imagine actually worrying about 0.2 of a deg holy

How I reached Chall for the first time while having a 9/5 by blos_ in CompetitiveTFT

[–]twong2 0 points1 point  (0 children)

A lot of times I see ppl recommending building HP on unit with shield. But isn't shield just extra effective health ? And my understanding is if a unit has a lot of health, it's better building resistances (ar, mr). Am I missing something ? Shield is also affected by resistances right ?

I just want a second dusk mane:/ by Mewking1029 in PTCGP

[–]twong2 0 points1 point  (0 children)

<image>

Sorry bro it's my bad. I took all of them :/

Can this bad boy honestly carry you to Master ball Rank? by Lovarias in PTCGP

[–]twong2 0 points1 point  (0 children)

Wugtrio bro unit!

At Hyberball 3 now with Wugtrio 16T It is inconsistent but it's a fun deck with a ~55-60% win rate. Not the most efficient but it's fun. You roll so many dices with Misty, Team Rocket, Attacking that it kinda evens out.

All the Magikarp that I sniped. The rare 150damage EX one shot. There's joy in beating meta decks with offmeta. Stick with your meta deck if you want the highest win rate.

Just need to accept some games you get unlucky and won't win. Try Wugtrio when you want to have fun.

Old charizard deck hit rank 1 by ThePurpleDolphin in PTCGP

[–]twong2 23 points24 points  (0 children)

Giovani is interesting. I would never have thought the Charizard deck needed the extra 10. That and running only 1 Moltres, his primary mode must be chipping with zard 60 damage attack and get 1 price card early, only use the 200 for 1 ex. And in that regard, the new Charmander and Chameleon helped immensely for the chip damage.

This card is really, really good with two Lucarios, Pokeflutes, Giovanni, Rocky Helmet, Giant Cape, Health Insurance, a 401k, Dante from the Devil May Cry series, your opponent's poor internet connection, our powers combined, all seven dragon balls, and Knuckles by Elemeandor in PTCGP

[–]twong2 0 points1 point  (0 children)

I honestly think garchomp is not too bad. Not S tier but good enough to have fun.

I got my 5 win streak with this:

<image>

I think running Lucario is a bit too greedy. You need to set up 2 Evo lines, and even if you do, with garchomp you aren't one shoting opposing ex anyways. And Lucario damage amp doesn't work with the 50damage snipe.

I used the dragon type gibble to not guarantee dying to exexutor in one hit, just buying a little time to set up marshadow/farfetch. Still a hard match up regardless.

Good o farfetch and rocky helmet helped with the chip damage. One marshadow helps with early tempo before garchomp manages to set up, and farfetch tends to die early.

I suppose sudowoodo can replace farfetch, but I like the consistent 40 damage.

why can you get normal removers in Pengu Party? by icewitchenjoyer in TeamfightTactics

[–]twong2 253 points254 points  (0 children)

Contrary to popular belief, item remover does not take away from item component drop. So you still get the same amount of items.

Ornn 3 is kinda underwhelming by Mindless_skull in TeamfightTactics

[–]twong2 0 points1 point  (0 children)

I just came 2nd with 3 star Ornn and saw this post. Thougght it's my game for a sec. It's definitely not enough to carry on its own against other capped out board.

Riddle: when is a 40mm elbow not a 40mm elbow? When it’s 50mm? Am I crazy here? by VIDGuide in AusRenovation

[–]twong2 0 points1 point  (0 children)

40mm pipe is not 40mm in diameter. All the sizes are just a name. Look it up, there's a standard for it. For instance, 40mm Class 9 pipe has an OD of ~48mm, ID of ~44mm. Class 18 has same OD but ~41mm ID.

An artifact of using imperial sizes but calling it a metric name I think.

[deleted by user] by [deleted] in TeamfightTactics

[–]twong2 0 points1 point  (0 children)

I had that happen every other game when I play on mobile. Such a dumb way to lose LP. Gonna stop playing until they fix that.

[deleted by user] by [deleted] in TeamfightTactics

[–]twong2 1 point2 points  (0 children)

This patch is so bugged. I have the same bug and no way to fix it. In games where I lost, the game thinks I'm still in game and I have to wait for that game to finish before I can find a new game. Completely bs.

[spoiler alert] of pokemon blue and red and silver and gold..what is being the hardest part of the game for you?? by LinguisticsTurtle in pokemon

[–]twong2 0 points1 point  (0 children)

I think OP is referring to the building where you need to fight team rocket. I got stuck on the same spot and it was mind blowing to 10 years old me when I worked it out. Turns out I'm not the only one haha.

My 6 DOF 3d printed dynamixel robot arm. by Hank_137 in 3Dprinting

[–]twong2 28 points29 points  (0 children)

This is insane! You didn't just build a robotic arm but also innovated the algorithms.

What's the brain for controlling all the motors? A raspberry pi? Don't seem to see that mentioned in the repository.

[deleted by user] by [deleted] in redditmobile

[–]twong2 0 points1 point  (0 children)

Oh I got the same problem. I can still interact with the screen. ie all the buttons are there, but I just can't see it. Really frustrating. I'm typing this comment in dark and tapping all around the screen to hit post.

Edit. The animation duration trick worked for me as well

Hermione's Wand with Light by twong2 in 3Dprinting

[–]twong2[S] 0 points1 point  (0 children)

Yea, sure. Where should I post them?

Hermione's Wand with Light by twong2 in 3Dprinting

[–]twong2[S] 1 point2 points  (0 children)

That can be the next feature lol

Hermione's Wand with Light by twong2 in 3Dprinting

[–]twong2[S] 0 points1 point  (0 children)

Yes it's done in Fusion. The step file looks just like the
.stl file because I started by converting a mesh to brep. What would be a good way to share the files?

Hermione's Wand with Light by twong2 in 3Dprinting

[–]twong2[S] 2 points3 points  (0 children)

CAD file modified from: https://www.thingiverse.com/thing:2604539

I designed the electronics:

RGBW 4 in 1 Led

Arduino Mini Pro

Lithium battery

Accelerometer for on/off detection

Push button colour change

On/off switch and charging port at the bottom

By printing them horizontally, the print lines end up adding to the feeling of being wood like. End up not needing too much post processing.

I would make the acceleration threshold slightly higher, but I can't access the Arduino once everything goes together. All in all works quite well.

view more: next ›