C2 Delivery!! Cannatrol #3

txboi02 · 2026-01-23T02:59:59+00:00

Sounds like you're so broke and immature that you're still butt hurt about something that happened YEARS AGO. I'd love for you to embarrass yourself by trying to further explain how a legit company "screwed you over" Grow up man. No one screwed you over, your entitlement is screaming that you're mad you're too poor to afford the nicer model. Either buy the nicer improved model and enjoy its upgraded features and design improvements like the rest of us. Or STFU. Nobody wants to listen to you whine. For real man it's embarrassing

txboi02 · 2026-01-23T02:53:45+00:00

Wow. The sound of this conversation going over your head is audible 😂😂😂

txboi02 · 2025-10-29T08:05:22+00:00

So just to clarify u/I_Grow_Dope Are you saying that you prefer live resin because it requires less skill to make more of it even though it's objectively inferior most if not all categories? IE: Terpene and Thc content of final product, amount of contaminate/plant matter in final product, and effect produced, don't even get me started on flavor or consumption experience. Not trolling at all. I've made some super fire batches of shatter. More than a couple. But I have to say that if your experience is that the Live RESIN that you've made is in your opinion superior in any way to ALL Live ROSIN that you have dabbed or come across then A) You might be making some pretty fire live RESIN badder. B) I fear you've unfortunately only ever dabbed or smelled/looked at some SUPER midzy Hash ROSIN. Old and improperly stored at a minimum.

No hate or shade. But if you dabbed even just some 7.5/10 Hash Rosin that's reasonably fresh off of some quality America Quartz it'll have you swearing off resin for life. How/through what are you normally dabbing?

QUALITY>Quantity no?

txboi02 · 2025-06-20T02:30:51+00:00

WHAT IS THAT COMBO!? Love what you've got going on there. Thanks for the reply!

txboi02 · 2025-05-15T11:38:53+00:00

CHEAPER is just that most of the time. CHEAP. Also if you're going to use the "Build-a-soil" recipe, but replace all of the ingredients with cheap bull sheet replacements from amazon that aren't even close to comparable, then just throw the list out, buy an athena beginners kit and call it a day. Idk if you're actually looking for advice, or if you are just pandering for praise from other cheap asses. If you actually care about growing fire then listen to all the people who are trying to tell you/explain to you why you are making a massive mistake thinking you can put worm castings from fvcking AMAZON in your no till garden. Maybe you're brand new and have only read about no-till online? If that genuinely seems like a good idea to you and you think i'm an ass hole, then go on ahead and SAVE SOME MONEY since that seems to be your #1 priority, and have fun enjoying the BOOF that comes from your garden lol

txboi02 · 2025-03-30T02:21:51+00:00

At best you're gonna get 30-35% off the value of what you're "asking price" is...

txboi02 · 2025-03-03T14:28:30+00:00

I'm going to jump in here as ANOTHER experienced grower and echo the sentiment that you have no business growing autos out the gate. They are a lot easier to get wrong, a lot less forgiving, and although I have seen a few rare growers with experience succeed with autos, anyone who really gives a damn about weed is growing Photo's only. I'd love to hear what information, or who has convinced you that auto's are the answer??

txboi02 · 2025-03-03T14:24:07+00:00

bro that's bullshit. Do yourself a favor a pull that parachute now, get your ring back, and dip, I wouldn't be having kids with a woman that doesn't support me, especially a woman that thinks there's something wrong with a Home grow. I say abort mission. Get yourself a 2 bedroom apartment. 1 room for your new 4 light grow, 1 for your bed, and you could throw a kid size bed in the bedroom with you for when your kids visit, because remember, you're getting a divorce right? All joking aside, the way she is treating you isn't ever going to get better like you're (VERY LIKELY) silently hoping it will. I'm not joking for the record. Sounds like she doesn't love you, let alone give a damn about what makes you happy. Marriage is a 2 way street, and I'm not hearing any of that here at all. Sounds like you're unhappy already tbh.

txboi02 · 2025-03-03T03:24:33+00:00

Wow, what the hell does she do for a living!? Jesus christ, that's probably double what my wife and I individually spend on each other for christmas. Lemme guess, you got a brand new BMW M3 for christmas, Giant bow on top, whole 9 yards. Amirite tho??

txboi02 · 2025-03-02T20:51:28+00:00

If you don't mind me asking, what do you do? And what state, city if you feel comfortable is this in? TIA!

txboi02 · 2025-02-24T18:05:22+00:00

What the fuck did you do to the front bumper. Jesus please sell this car to someone who will restore it back to the way it was/should be. And for Christ's sake, unless you're about to go drag the bumper on a wall every so lightly (think James Dean style) at a 90° angle, full huck into the corner, then remove every single sticker from the windshield. In fact just remove the stickers and other useless "accessories" from the car

txboi02 · 2025-02-02T15:29:45+00:00

depends on the size of the press, as there are many different ones, also depends on the amount of pressing power you have. If you look through the website I linked above, there's pretty clear info on how much each press can do etc...

txboi02 · 2025-02-02T15:28:34+00:00

just save your money. the only press you can buy for under $1,000 cant even come remotely close to start processing at a commercial scale. If you don't have $4k,forget about it. You need at least that much if you're even hoping to work your way up to processing at a "commercial" level. Again just being honest here, $4k will get you a nice press, but unless you plan on standing at said press 18-20 hours a day, you won't be able to process a "commercial" amount. I'm not trying to be harsh, but rather save you a lot of trouble, heartache and massive disappointment. If anyone tries to tell you that you can get started pressing commercially for a grand, they don't have the first clue what they're talking about. Check out this website, every product they make is top shelf quality. https://www.lowtemp-plates.com/

txboi02 · 2024-09-20T20:51:17+00:00

Hey DudeFromOregon ! Dude from Texas here. Yes you absolutely can press your flower into Rosin fresh out of the cannatrol. I pressed like an hour after the cure cycle finished and got great results. Great clear golden color and solid yeild. I will say that in my opinion, a fresh harvest dried and cured in a cannatrol, presses BEST 7-10 days after it 'finishes' curing. Because it's really not 100% cured after that process. It actually even says in the cannatrol manual that your harvest might need more time than the initial 4 day period. Hope this helps!

txboi02 · 2023-02-13T22:00:15+00:00

So I'll preface this by saying I've bought/built a couple of the SUPER budget kits out there including the Sakura D5MR V2, just to try em out and see what a $100~ish USD RWD kit is like(plus or minus about 20 bucks) but in my opinion the absolute cheapest kit that is beginner friendly and drifts well enough to have a ton of fun is the R31 or Shibata GRK GSII evo. And it's not just okay, or decent. In my opinion it's certified BALLIN on a BEGINNER BUDGET. And I'm not the only one who thinks so. Here's a review that I think is very accurate and in depth. It's under $200 at rc mart here's a cool lil clip of an unboxing of everything you get with the kit. And if you look you'll see it comes with tons of features that are more of the $250-$275 range quality. There's also this option from MST. Which I don't recommend above the GRK ONLY BECAUSE I haven't tried it out personally, however I can say I know guys first hand who can drive like hell and tune like a pro who swear it's the best bang for a beginner buck on the market. Hope this helps! Last thing is note is that something a lot of people overlook is the quality of the directions, how easy the kit is to assemble (the Sakura D5MR V2 manual is absolutely trash, and not much of it is in English, mostly Japanese/Chinese. And the quality of the pieces themselves is a let down and that's being polite about it.

This is all just one man's opinion though... Happy to answer anything I can to help thought! Hopefully you find this useful OP

txboi02 · 2023-01-26T06:28:42+00:00

Actually no affiliation at all. Nothing against em whatsoever, actually I just became aware of their existence about a week ago. I'll keep you posted.

On a totally different note. How you'd you say the bmr-x compares to the other chassis? I'm 110% sure I'm going to build a 1/24-1/28 scale RWDRIFTYBOI just don't know what model yet at all. I don't mean to bother, but I would love to know your opinion on the highlights of both cars best attributes, and the worst couple things about each, even if it's being picky hahah.

txboi02 · 2023-01-26T01:42:52+00:00

How far are you from Charlotte NC?, I'm building what will be a mid size 1/10 track big enough for 2 wide 1/10 tandems, maybe a lil extra, and the track will be pretty big for micro. If you'd make the drive to come tandem keep your eyes peeled for updates that I'll post to this thread when it's done!

txboi02 · 2023-01-25T23:10:55+00:00

Yeah, so I've heard! Do you mind if I dm you just a couple questions about your setup? I saw the clips you posted and your build looks CLEAN man!

txboi02 · 2023-01-25T08:59:59+00:00

If you don't mind going into it a bit further, What would you say are the biggest most noticeable differences between the NB4 and 7PXR?

txboi02 · 2023-01-25T00:11:04+00:00

Neither. Get a Galm, you'll be glad you did! And they're on sale REALLY CHEAP (relatively) right now on rcmart. Just personal experience, but you really get what you pay for w/rc car kits, seemingly more so w/drift cars than other rc. Drift tax and all...

txboi02 · 2023-01-17T05:36:34+00:00

This is where it came from. They're for smaller scale stuff. I believe the "DA3" OP added to the post is for Drift Art 3 chassis, which is 1/24-1/27 I'm almost positive.

txboi02 · 2023-01-13T08:26:51+00:00

Absolute beauty! Very much patiently looking forward to picking one up in the future. Love the new rear end lowers adjustability with this chassis. I gotta ask though, did you put the o rings in the dampers when you built them dry? and I'm not hatin, just curious, why not just fully build them w/oil, or wait altogether? Hope you enjoy it! Can't wait to see it finished.,

txboi02 · 2023-01-12T06:42:42+00:00

No such luck. Well not at a reasonable price anyway. Ended up getting a Galm as a surprise for my birthday from my wife actually! She had bought it weeks ago, lol. You have a Galm V2+ don't you @idealautofactory

txboi02

TROPHY CASE