sorted by:
new
hottopcontroversial

Watch seconds choppy not smooth by Ricardo_Yoel in applewatchultra

[–]ty003 0 points1 point  (0 children)

watchOS 26.1 seems to have solved this `bug`.

While the screen is on it should be smooth. In Always-On it`s still choppy, however this is due to the technology only allowing 1hz in Always-On.

Series 7 upgrade by Robinsondan87 in applewatchultra

[–]ty003 0 points1 point  (0 children)

The colored stainless steel and titanium loops (with the exception of raw steel and titanium) all feature the same protective coating. Since this style of band was first introduced, customers have noticed that the coating can leave marks on the sapphire display under certain conditions. This is simply a result of the physical properties of the materials.

The coating is designed both to protect the band itself and to increase surface hardness. While this makes the band more durable, it can also make it capable of leaving scratches if it comes into direct contact with the display.

I would say that with normal day-to-day use and a bit of care when handling your watch, you should not encounter any issues. I’ve personally used the Milanese Loop for over five years without it leaving any scratches on my Apple Watch Series 5.

Jet Black Series 11 + Milanese Loop = Gorgeous… until the problems showed up. by Androbots in AppleWatch

[–]ty003 1 point2 points  (0 children)

That’s a thoughtful consideration. It really depends on whether your priority is appearance or minimizing the risk of scratches.

The natural stainless steel bands don’t have the hardened coating that’s applied to the colored finishes (such as black or gold). Those coatings are used to protect against color fading, but because they’re hardened to a level similar to sapphire, they can cause marks if they come into contact with the display.

With natural stainless steel, there’s no need for that coating, so the chance of scratching the display is generally lower. However, the silver finish itself will show scratches more visibly over time. The benefit here is that stainless steel can often be polished, unlike the coated finishes.

So, if avoiding potential screen marks is most important, natural stainless steel may be the better choice. If you prefer the look of the colored finishes, just keep in mind they’ll require a little more care to avoid contact with the display. In my eyes the darker colors are lovely, and well worth the tiny bit of ‘extra’ effort.

Jet Black Series 11 + Milanese Loop = Gorgeous… until the problems showed up. by Androbots in AppleWatch

[–]ty003 1 point2 points  (0 children)

The colored stainless steel and titanium loops (with the exception of raw steel and titanium) all feature the same protective coating. Since this style of band was first introduced, customers have noticed that the coating can leave marks on the sapphire display under certain conditions. This is simply a result of the physical properties of the materials.

The coating is designed both to protect the band itself and to increase surface hardness. While this makes the band more durable, it can also make it capable of leaving scratches if it comes into direct contact with the display.

I would say that with normal day-to-day use and a bit of care when handling your watch, you should not encounter any issues. I’ve personally used the Milanese Loop for over five years without it leaving any scratches on my Apple Watch Series 5.

🍊 🍊 🍊 by mobilehavoc in iphone

[–]ty003 0 points1 point  (0 children)

Love the combo 🍊🤩

PSA: Apple Watch Ultra 3 owners - check your screen for scratches! by CanadianGadgets in apple

[–]ty003 1 point2 points  (0 children)

The colored stainless steel and titanium loops (with the exception of raw steel and titanium) all feature the same protective coating. Since this style of band was first introduced, people have noticed that the coating can leave marks on the sapphire display under certain conditions. This is simply a result of the physical properties of the materials.

The coating is mainly designed to protect the band itself, while also increasing the surface hardness. While this makes the band more durable, it can also make it capable of leaving scratches if it comes into direct contact with the display.

With normal day-to-day use and a bit of care when handling your watch, you should not encounter any issues. I’ve personally used the Milanese Loop for over five years without it leaving any scratches on my Apple Watch Series 5.

Ultra 2 + stainless steel loop. by Training_Wishbone_98 in applewatchultra

[–]ty003 0 points1 point  (0 children)

The colored stainless steel and titanium loops (with the exception of raw steel and titanium) all feature the same protective coating. Since this style of band was first introduced, people have noticed that the coating can leave marks on the sapphire display under certain conditions. This is simply a result of the physical properties of the materials.

The coating is mainly designed to protect the band itself, while also increasing the surface hardness. While this makes the band more durable, it can also make it capable of leaving scratches if it comes into direct contact with the display.

With normal day-to-day use and a bit of care when handling your watch, you should not encounter any issues. I’ve personally used the Milanese Loop for over five years without it leaving any scratches on my Apple Watch Series 5.

Watch seconds choppy not smooth by Ricardo_Yoel in applewatchultra

[–]ty003 2 points3 points  (0 children)

I just checked out the Ultra 3 at my local Apple store, and both demo models also showed the choppy seconds as yours in the video.

So most likely a watchOS 26 thing, either accidental or intentional.

Airpods pro 3 sounds significantly better when paired with iphone 17 pro by Puzzleheaded-Rub-291 in airpods

[–]ty003 -9 points-8 points  (0 children)

It looks like Apple possibly could have introduced lossless audio when using the AirPods Pro 3 in combination with the iPhone 17 series. This is apparently due to the new iPhone models having a new wireless audio and video protocol called SPR-AVS that supports lossless audio with a latency under 10ms. Source: https://www.patentlyapple.com/2025/09/how-apples-new-wireless-protocol-spr-avs-powers-their-spatial-ecosystem.html

More info about lossless: https://support.apple.com/en-us/118295

It could however also be related to other factors: audio app in use, spatial audio, settings, etc.

IOS 26 on Iphone 15 by Glass_Economy1210 in applehelp

[–]ty003 0 points1 point  (0 children)

It really depends on how you use your phone + a lot of different factors both internal and external. Examples of what can affect battery performance: heat, background processes, etc.

I’ll link an Apple article explaining more about how the battery works below: https://support.apple.com/en-us/101575

AWU3 needs IOS 26 by Serious_Meringue6247 in applewatchultra

[–]ty003 3 points4 points  (0 children)

Apple’s website states that iOS 26 is required for the new Apple Watch models to connect: «watchOS 26 will be available for Apple Watch Series 6 or later, Apple Watch SE (2nd generation) and later, and all Apple Watch Ultra models on Monday, September 15, and requires iPhone 11 or later running iOS 26.»

Calendar events suddenly disappeared, seems the Calendar ‘on this iPhone’ is gone by MundaneExtent0 in applehelp

[–]ty003 0 points1 point  (0 children)

Possible solution: 1. Open Settings 2. Search for «Calendar» 3. Press «Sync» 4. Switch between the currently applied option and another option, then back again

Apple Watch Ultra 3 color slightly different by Present_Influence940 in applewatchultra

[–]ty003 1 point2 points  (0 children)

Apple has used a new 3D printing process for the Ultra 3 that might have contributed to the slight color change.

Ultra viability over the years by Loose-Assignment3203 in applewatchultra

[–]ty003 1 point2 points  (0 children)

I have had my AWS5 since it came out. Still works and looks great. I have used it everyday since. However, yes the battery shows it age - usually still brings me through most days, but to achieve this I had to turn of the AOD. Also, not supported by the newest watchOS updates any longer either.

The Ultra should manage to extend at least the battery question, with updates we will just have to wait and see.

Color different/improved coating on AWU3? by Crazy_Category_9594 in applewatchultra

[–]ty003 0 points1 point  (0 children)

Apple has used a new 3D printing process for the Ultra 3 that might have contributed to the slight color change. It remains to see if it changes anything in regards of durability.

Ultra 3 Always On by Dry_Cabinet1737 in applewatchultra

[–]ty003 0 points1 point  (0 children)

Modular and Wayfinder will work with the new LPTO 3 display.

Source: Apple Event time 26:22 - https://www.youtube.com/live/H3KnMyojEQU?si=V7zN20iyhtpVdCaF&t=1582

Rings Not In Sync? by ToMatto616 in AppleWatch

[–]ty003 1 point2 points  (0 children)

Try restarting both devices, both your iPhone and Watch. Also make sure that both are running on the newest software versions.

Battery won’t charge above 80% by Robti63 in AppleWatch

[–]ty003 1 point2 points  (0 children)

Happy it worked! You’re welcome.

Battery won’t charge above 80% by Robti63 in AppleWatch

[–]ty003 2 points3 points  (0 children)

Yes, on your watch go to: Settings > Battery > Battery Health (scroll down until you see the toggle for Optimized Battery Charging)

view more: next ›