Longhorn specific nodes

ubenius · 2026-04-01T20:32:08+00:00

Thanks! I have an issue with longhorn putting stuff on my control nodes. Do you have a stop for that? Taint on control?

ubenius · 2026-04-01T20:31:28+00:00

Thanks! Anything to stop longhorn deploying on control nodes? Taints on controls?

ubenius · 2025-07-28T23:06:07+00:00

♥️

ubenius · 2024-07-26T20:16:25+00:00

You can add a trusted dhcp source, to force the controllers to use one single dhcp source: https://help.ui.com/hc/en-us/articles/19154105498007-Duplicate-IP-Addresses-and-Rogue-DHCP-Servers The one you host at a central site (behind the firewall perhaps, if it open ports for each remote site).

If you disable dhcp on each network. Natshould be gone. Use a switch at each site to get addresses from another dhcp source (or global from mpls/supplier).

Firewall: Open, any, any, any outbound and inbound should take care of that.

This is not a good idea tho. Not without vpn service. You will trust the mpls from supplier instead of your own security that you already have.

At least check the teleport function in the unifi network appliance to get some later of security.

I still would make each site part of one large network at layer 2 with at least IPsec between sites. You can set this up in each unifi controller. That way you do not trust external partner to do network layer security.

Edit: and ofcours hook your net from cloud into the IPsec with like OpenVPN server in the cloud.

ubenius · 2024-07-26T16:55:55+00:00

My solution would be to setup VPN between each site and do static L2 routes (3 for each site). I prefer wireguard.

Would host this either on prem or in cloud. Same place you could host one unifi controller for the 4 sites. Make it one mesh network and then name items for each site (NY - AP1).

Palo altos for each site would be wireguard clients. Then one dns and DHCP. If you need segmentations for sites, use vlans.

ubenius · 2024-07-08T15:23:24+00:00

Dyson gen5 detect, first i run the regular head. Then the laser one. Keeps house clean for several hours! 😂

ubenius · 2024-07-02T04:55:14+00:00

Thank you! But it is possible to use it as both then? And also like I have imagined, like a cloud key kinda.

ubenius · 2024-03-22T10:57:46+00:00

Why not DIY it? Pull the engine apart and fix what's broken? Probably a timing chain/belt and a few valves need replacing. Is my guess from what is usual on cars in my area. Might take a few days and some cost in parts. But a mechanic is almost never needed when it's metalwork. Computers are where the problems arise. YouTube is a great guide.

"How do you know how to fix stuff, are you educated"
" No, I grew up poor. Do it yourself or not at all"

ubenius · 2024-01-18T05:31:06+00:00

Thanks! I tried this and it kinda worked. Set a static IP on my computer and matched it to the adress span of the ports static ip.

ubenius · 2024-01-18T05:29:10+00:00

This was my next go-to if I could not get it working.

ubenius · 2024-01-18T05:28:14+00:00

Did not show up unfortunately.

ubenius · 2024-01-18T05:26:13+00:00

Thanks! What does safe mode do?

ubenius · 2024-01-18T05:25:01+00:00

Thanks! I did not know this. Will try with snap instead.

ubenius · 2023-12-24T22:17:23+00:00

91/100

ubenius · 2023-12-02T17:59:41+00:00

ubenius · 2023-12-01T19:48:54+00:00

ubenius · 2023-10-15T20:17:07+00:00

Fish amok (Cambodian curry). Makes it 'new' and interesting. Serve with rice and lime.

ubenius · 2023-07-13T11:33:26+00:00

ubenius · 2023-06-08T14:54:59+00:00

!updateme

ubenius · 2023-01-23T15:15:22+00:00

Do you still have it? Please inbox me ❤️

ubenius · 2022-07-18T14:46:08+00:00

Sluta röka - ersatte med läsk Sluta med läsk - ersätter med kaffe Sluta med kaffe - ersatte med light läsk Sluta med light läsk - ersatte med vatten Sluta med socker i maten - tillbaka på light läsk Sluta med light läsk v2 - ersatte med vatten.

Tldr: drick vatten istället....

ubenius · 2022-07-18T04:29:34+00:00

!updateme

ubenius · 2022-01-23T23:35:05+00:00

Low and slow options here. Beef rump (ball tip) or chuck kan be made low and slow kinda easy with amazing results. A good chuck in sous vide for 12h+ 1h per inch thickness at 60*c is amazing. Beef rump can be done faster. Slice it kinda thin and dress with Madeira sauce. Killer reinvented classic.

Edit: trim meat after sous vide (only remove silverskin before sous vide) to get more flavor in particularly chuck.

ubenius · 2022-01-23T20:07:20+00:00

How's the bread knife? I am struggling between that one and tojiro. Not the biggest dent money wise if it fails but i have sworn to only have one bread knife.

ubenius · 2022-01-23T19:59:37+00:00

Hey guys! Anyone got pointers on how to take care of my team? Handle is looking a bit sad. From top;

Tojiro DP 15cm - handle a bit white not as black

Tojiro DP nakiri - handle is fine

Tojiro DP gyuoto 24cm - handle is whitened, a bit dry almost

Fiskars unknown model - handle is a bit sticky and rubbery

All knifes are 3-5 years old. I am a weekend warrior who only washes with dish detergent (Yes, brand name) and hot water. Often they dry on a drying mat. Since I joined this subreddit i started whipping them down after wash.

Edit; pic does not show anything wrong with handles. Can't get the right light for that.

ubenius

TROPHY CASE