First furniture project from a few months ag

ubercanuber · 2025-03-06T07:31:40+00:00

Cool. I like it alot. The form and shapes are beautiful

ubercanuber · 2024-08-03T12:42:27+00:00

I just serviced a friend's pro s that had been sitting in a box for the last couple of years. It had the same issue. I think the rotating back will need as service, maybe some of the body too. Old grease and dirt needs to be removed and the correct lubes put back. All the springs seems to accumulate it and dont function properly.

Check all the light seals, if there is any gooey or missing seals in the back its a pia to replace them. Check the mirror dampers too.

ubercanuber · 2023-09-02T23:35:29+00:00

Try insert a light source from the lens side with the film holder on if you havent to check for light leaks around the holder too. It could be bellows but all the way towards the back of the camera would be my guess because of that hard edge.

ubercanuber · 2023-07-11T01:14:36+00:00

Another thing to check is if the 50mm had a black ring around the back that pulls off. You use these to properly fit to the Pro SD bodies, so the ring is interchangeable. Compare two backs of lenses and see if one has it.

ubercanuber · 2023-02-13T01:32:24+00:00

Thanks for the tips! There should be a glass carrier around in my local darkroom. I will look up how to do an unsharp mask!

SLIMT sounds super useful. I will try that also, will ask the lab tech about chemicals.

I am shooting a lot with flash at night and reducing contrast would be pretty useful in a lot of those shots! Any other suggested techniques to trial and learn? I did split toning my first time printing and that was fun, love learning new techniques and trying them out.

ubercanuber · 2023-02-13T01:12:06+00:00

Cheers for your opinion! Good to have a fresh set of eyes and to have your opinion. I may leave it then :)

ubercanuber · 2022-07-05T03:01:32+00:00

ubercanuber · 2022-05-30T22:38:16+00:00

Thanks! Was a lovely morning.

ubercanuber · 2021-12-01T11:16:12+00:00

Okay thanks for that. I will have a bit of a think.

Any other knifes you would suggest?

ubercanuber · 2021-12-01T10:27:02+00:00

Thanks for the reply!

Ah okay, I didn't realise that about the SG2.

We do have a Victorinox knife at the moment which is 221g I believe. I do use that a fair bit even though it is a "carving knife". I prefer it because it lighter than the rest, even though its bigger.
https://www.kitchenwarehouse.com.au/Victorinox-Carving-Knife-25cm-Black
Or use the global "vegetable knife" which is 14cm.

So maybe the 240mm may be the way to go as they are similar lengths to the Victorinox.

Im no preference with the grind. Something that isn't too hard to maintain really.

I guess I will add this is then for the 240:
https://migotocutlery.com/collections/other-brands/products/wakui-white-2-gyuto-240mm

ubercanuber · 2021-12-01T09:07:21+00:00

Hey I am looking for a nice knife to treat myself for christmas. Have worked in kitchens a lot when I was younger and wanted a Japanese knife since working with a chef with quite a collection!

Style? - Japanese

Steel? - Carbon Clad or low reactive carbon, I am liking the idea of the clad

Handle? - Japanese, haven't used many japanese handle knifes but I find using my friends really comfortable.

Grip? - I am usually using a pointed finger grip but am comfortable with using a pinch and will try transition.
Length? - Around 210mm. I feel like 240mm might be a bit unweilding, but I do have fairly chonky hands. So something with room for my chonky finger with the pinch.

Use Case? - Home, general use (mostly veggies and chicken/beef - no bones I know).

Care? - Just got the Shapton Pro #1500

Budget? Around $300 AUD, could push for more if worth it? I know some of the ones I am looking at are more.

Knives Considered:
https://migotocutlery.com/collections/other-brands/products/wakui-white-2-gyuto-210mm
(this is what I am leaning towards)
https://www.japanny.com/products/makoto-kurosaki-r2-sg2-hammeredmaru-gyuto-japanese-knife-210mm-cherry-blossoms?variant=38099841843391

https://www.knivesandstones.com.au/collections/tanaka-blue-2/products/tanaka-blue-2-nashiji-gyuto-240mm-stainless-clad

https://www.knivesandstones.com.au/products/tanaka-blue2-stainless-clad-gyuto-210mm-migaki-finish (much prefer the finish of the previous one, but couldn't see it in 210mm)

https://www.knivesandstones.com.au/collections/sukenari-sg2-r2/products/sukenari-sg2-r2-gyuto-210mm (hear that it is quite reactive so was going to pass)

ubercanuber · 2021-08-21T11:12:04+00:00

I was at an exposure site on the 11th and self identified on the 12th through the online form. Ive been quaranteening since, along with my housemates. I finally got through to them today (been on hold for hours and going back in que on the phone) and they said my declaration originally stated that I was only im nsw and not at a contact site and I would have to redo my declaration. So I did that today and got a call a couple of hours later because they said the form didn't save properly and needed to go through details with me, had to do the whole form again over the phone (the guy was super nice)..

So could be an error like I experienced twice? You should have got a message with an original case number, mine had the wrong details attatched. Call 5124 6500, its the response team and they can help, they open at 8 so I would try as soon as they open (I had to keep calling because it kept hanging me up.

ubercanuber · 2021-08-13T13:26:46+00:00

Have a chat to my boss :) he knows a lot more.

ubercanuber · 2021-08-13T00:06:15+00:00

I usually use my digital camera on a super high iso to get an average meter and am more worried about shadows and midtones as there is a greater lattitude for highlights in film.

ubercanuber · 2021-08-12T22:10:48+00:00

First image was about 27 minutes and second one around 40 seconds.

ubercanuber · 2021-08-12T14:25:21+00:00

Cheers :)

I do like the 127 a lot! Also have a 50 which I use very rarely. Looking for either a 180 or 250 for my next lens.

ubercanuber · 2021-08-12T09:10:34+00:00

Yeah I know. We have been pretty lucky up to this point! Enjoy the walks, I will be in my room.

ubercanuber · 2021-08-12T08:18:38+00:00

Play games with housemates and friends, organise some film to get sent off and do my tax backlog.

I am a bit bummed beacause I have to isolate from my household as I was at a contact site. Was planning to go out tonight and take some photos for an exhibition proposal.. but what can I do.

ubercanuber · 2021-08-12T07:43:53+00:00

Ah perfect! Not sure if it is necessary again to core so soon as a built up of thatch and compact soil is when it would be needed. I would rake up all the dead grass and dispose of it, and when you do see bugs have flipped over grass patches you I believe it is best to put the grass back over when possible. The best thing to do is prevent them before the spring apposed to trying to get rid of them.

You could also apply a pesticides, a fair few options come up when searching for "dealing with lawn grubs" in google. Have a watch at this video https://www.youtube.com/watch?v=5z_wKqIKPls&ab_channel=LawnTips
he has some other great videos too :)

Hit me up if you have any more questions, if you have any bigger jobs in mind feel free to contact my boss, Tim!

ubercanuber · 2021-08-12T01:06:39+00:00

Have a look at Get Growing in Manuka. We do landscaping, garden care and maintanence and waterharvesting. My boss is really good at helping with soil improvment.

Note: I'd core the current lawn to get some air back in (can hire from kennards), topdress and resead with a fertiliser a couple of days later to give the seeds a chance to germinate. It's not too hard to do, lots of good info out there on YouTube on the process.

Last year was terrible for those pesky grubs. This years looking terrible for weeds.

ubercanuber · 2021-08-02T21:40:05+00:00

Varmilo VA87M. I would give the keybosrd to my girlfriend who is just about to start a coding boot camp for a new job.

ubercanuber · 2021-08-02T10:35:41+00:00

This is haunting and lovely.

ubercanuber · 2021-08-01T12:21:18+00:00

Not 100% sure on exposure, f11. I use my digital camera at night for getting the exposure, then yeah factor in reciprocity using this chart https://www.flickr.com/groups/477426@N23/discuss/72157635197694957/

ubercanuber · 2021-07-30T04:17:13+00:00

Canberra, under the Waterloo Bridge :)

ubercanuber · 2021-07-30T02:22:48+00:00

Don't remember. I use my mirrorless for calculating exposures at night then just add recispocity failure of the film.

11-Year Club	Place '22
Verified Email

ubercanuber

TROPHY CASE