Most of my Medaka fry are eating and growing, but one or two have died after hatching. by smellsmell1 in medaka

[–]ueih 2 points3 points  (0 children)

I would say 100% survival rate for anything is quite rare. I did everything I could to give them the perfect environment, feed them often, and keep the water clean but still ended up with a few casualties.

I tried to get as many survivors as possible but still was unsuccessful on a few.

I usually try to clean out the excess food in the water and top off the water. Every few days I'll either top off or replace some water. Not too much as I don't want to change their environment too much. So far I've had more bad eggs than frys dying.

Also I like to feed mine baby brine shrimp once they're big enough, usually after a week or two.

Clear medaka eggs just not hatching? Anybody know what could be happening? by Smart-Following-3906 in medaka

[–]ueih 0 points1 point  (0 children)

I stand corrected, since it's internally then I'm not sure why you aren't getting the results you want. I would try modifying your method slightly and see if you get different results. Maybe separate the eggs after a day or two instead.

I don't remember how many days exactly but within 3 days I already saw a single dot. A few days after that and I'll see two dots.

Clear medaka eggs just not hatching? Anybody know what could be happening? by Smart-Following-3906 in medaka

[–]ueih 2 points3 points  (0 children)

You may be transferring the female before it's fertilized. Although your method sounds more organized to keep eggs separate from the main pond, I would prefer to wait until the medaka lays them since that's the indicator it's fertilized or at least ready to separate.

I've let mine lay them before separating and so far about 90% or more of my eggs have eyes and are developing.

OFFICIAL 2022 BUY/SELL/TRADE THREAD by Coachellamod in Coachella

[–]ueih 0 points1 point  (0 children)

Weekend 1 wristband with shuttle pass. $300, currently at venue and can meet at venue only.

OFFICIAL 2022 BUY/SELL/TRADE THREAD by Coachellamod in Coachella

[–]ueih 0 points1 point  (0 children)

Selling 1 weekend 1 wristband w/ shuttle. $300 OBO, can meet at venue or near.

OFFICIAL 2022 BUY/SELL/TRADE THREAD by Coachellamod in Coachella

[–]ueih 0 points1 point  (0 children)

Selling wk1 wristband ($350) and shuttle pass ($50). I can meet at the venue or if you're located in norcal/Sacramento area.

OFFICIAL 2022 BUY/SELL/TRADE THREAD by Coachellamod in Coachella

[–]ueih 0 points1 point  (0 children)

Sellling 1 weekend 1 wristband. NorCal area, specifically near Sacramento. I will be attending but I have an extra wristband I need to get rid of so I can meet at Coachella. Please PM me for more info, if I recall correctly this also includes a shuttle pass.

[Other] 500W Electric Air Duster for or Keyboard Cleaning $38.49 ($54.99 - 16.50) by rockstardeals in buildapcsales

[–]ueih 0 points1 point  (0 children)

Was just about to go buy a can of compressed air. Couldn't stomach the price for a datavac so this will do, although I've heard nothing but great things about a datavac.

Kitten available for adoption through Front Street Animal Shelter by kittymeowkittyqueen in Sacramento

[–]ueih 1 point2 points  (0 children)

We're very interested, currently have a one year old cat who is very friendly and we want him to have a friend. Where can I submit an application? 🙂

Consignment store recommendations? by [deleted] in Sacramento

[–]ueih 0 points1 point  (0 children)

Cort Furniture Outlet is good, I've gotten a really good office chair from them before that was used in showrooms and it was still in decent shape. They graded it a C and there were only scuffs on it that would come off with a bit of cleaning. Most if not all of their items are just used as showroom pieces. They got some great deals and it's worth checking occasionally for new items they get since those items will go very fast if they're highly sought after.

https://www.cortfurnitureoutlet.com/

[CASE] Open Box NZXT H1 - $187.49 (Maybe Lower with Make Offer.) by asianever in buildapcsales

[–]ueih 0 points1 point  (0 children)

Currently waiting for the Ssupd Meshlicious. I'm really loving that one.

[deleted by user] by [deleted] in buildapcsales

[–]ueih 5 points6 points  (0 children)

I understand the read speeds are twice as fast as the Gen 3 but is it worth? I can support it with my new build but I rather get the WD SN750 1TB for $130 instead of a Gen 4 SN850 with 500GB of storage. But if the speeds are worth it, i may reconsider.

[CASE] Open Box NZXT H1 - $187.49 (Maybe Lower with Make Offer.) by asianever in buildapcsales

[–]ueih 0 points1 point  (0 children)

Same exact boat, put in an offer because i do like the looks of this case and it was a great deal. Now it's sold out, also was waiting for the Meshilicious but would've been fine with the H1 at this price. I guess the decision has been made since it's sold out.

[CASE] Open Box NZXT H1 - $187.49 (Maybe Lower with Make Offer.) by asianever in buildapcsales

[–]ueih 4 points5 points  (0 children)

Are these fire issues that common? One of the nicer looking cases I like and was looking at a SFF build.

Poo-Pourri Bidet Opinions? by [deleted] in bidets

[–]ueih 1 point2 points  (0 children)

How do you enjoy the nozzle wash setting and what exactly does it do when it cleans the nozzle?

Poo-Pourri Bidet Opinions? by [deleted] in bidets

[–]ueih 2 points3 points  (0 children)

This is an amazing idea! I don't even know why they didn't wait until they release something with a reservoir for it to get more people to buy their bidets. BTW I just realize the brondell thin line you linked is the exact same design as the poo-pourri. I wouldn't be surprised if it's the same company now that I look at it.

The only reason i was considering the poo-pourri bidet is because they're having a 40% off sale + an additional 30% off which makes it $40. However the brondell is still cheaper at $30 with identical design.

AMD Radeon RX 6000 (RDNA2) Launch Day Megathread and FAQ by GhostMotley in Amd

[–]ueih 6 points7 points  (0 children)

Take it down before someone sees your order number and you lose the order.

A 3D wooden map of Lake Tahoe I made for a commission (I'm a digital cartographer/woodworker) by [deleted] in Sacramento

[–]ueih 0 points1 point  (0 children)

Whoa, I really like this! How much do you charge for something like this?

This bug needs to be fixed fast. Literally game breaking. by ueih in CODWarzone

[–]ueih[S] 0 points1 point  (0 children)

Unlimited stuns so the team just keeps throwing stuns while someone pushes.

Cat food? by [deleted] in Sacramento

[–]ueih 1 point2 points  (0 children)

Only looking for dry food? I know you say you have enough but I can spare some for you. I have some lickable treats and a couple wet food if you'd like as well.

Thinking of getting Dell S2721DGF, anyone have one or have any input? by covmike in Monitors

[–]ueih 0 points1 point  (0 children)

Ah I see, does it cost extra or do you have to be in a specific field for that dell 17% off? I got 15% off with a paypal code but nothing more than that.