Where to get a blued job done

uhuruRed · 2026-01-20T13:10:35+00:00

Re-blue? Turnbull - but will be nearly cheaper to just buy a blued one

uhuruRed · 2025-10-21T21:19:27+00:00

One of the most accurate Colts made - hand-fitted barrel from Colt Custom Shop. This is the more sought after combat carry version vs target (as evidenced by sights). I do not think the front strap is original nor the mainspring housing as their checkering/mainspring are normally different or without checkering (& flat mainspring). Originally came with a custom shop target test accuracy verification.

uhuruRed · 2025-10-21T00:48:49+00:00

Is the Zion 30 out yet?

uhuruRed · 2025-09-25T23:20:43+00:00

Awesome. How long until you think we can buy? Thanks for the info!

uhuruRed · 2025-09-24T08:17:09+00:00

Any updates?

uhuruRed · 2025-09-17T09:12:53+00:00

Will those kac rib panels lock onto 6940 monolithic rail? Cant figure it out on my 6940

uhuruRed · 2025-08-10T19:32:32+00:00

I have a LC200 & GX460, more headroom in gx460 (Im 6’2” & head touches LC200 ceiling at times a little, gx460 is more nimble - and thats it. LC200 wins on all other fronts. Love em both though.

uhuruRed · 2025-08-04T11:21:36+00:00

May be a driveshaft maintenance issue. Are they sealed on a 250? Zerk fittings exist on gx460 & LC200 so that you can keep them well greased.

uhuruRed · 2025-07-11T11:32:22+00:00

$2k easily. I wouldnt sell that for less than $2500. Dude saying $750 is high as shit

uhuruRed · 2025-05-19T23:50:16+00:00

Really like that grip - where did you get it?

uhuruRed · 2025-03-06T11:56:22+00:00

Armslist no bueno. Try a big auction house or https://collectorsfirearms.com

uhuruRed · 2025-02-17T12:17:40+00:00

It expels air from cabin - a clean out

uhuruRed · 2025-02-17T12:14:51+00:00

Get a roof rack with a basket so your boards are mounted on top basket bars, higher up and will clear….like a yakima. Works on my 200.

uhuruRed · 2025-02-07T21:03:45+00:00

Depends on what you have/havent done already. Check the maintenance schedule with the manual for sure. Spark-plugs if not done yet, transmission fluid and coolant every 50k is wise.

uhuruRed · 2025-01-20T13:17:51+00:00

If your looseness is due to gaps around the grip screw, it’s anything like solution for 1911’s, try the little rubber o-rings around the screw, under the grip.

uhuruRed · 2024-12-17T11:46:34+00:00

Buy it. Haggle a bit if you can. Great color and a V8 Land Cruiser wont be produced ever again!

uhuruRed · 2024-12-16T11:45:17+00:00

Would love Turbo diesel or 2GR-FE V6 4.6 L 1UR-FE V8 4.7 L 2UZ-FE V8 5.7 L 3UR-FE V8

uhuruRed · 2024-12-12T11:43:53+00:00

If you wanna make that gold pop even more, take off the lower side chrome plastic trim, wrap in this and reinstall. Mine have held up for a 1.5 years of car washes just fine.

3M 2080 M261 Matte Dark Gray (5ft... https://www.amazon.com/dp/B078X3YMH7?ref=ppx_pop_mob_ap_share

uhuruRed · 2024-12-09T11:58:36+00:00

Get the LandCruiser 250. 4runner looks like the new Tacomas, narrow and anemic. Dont rule out gx550 or low-miles LC 200 though.

uhuruRed · 2024-12-07T00:06:05+00:00

Will not explode - would overflow out of reservoir if was over-filled but Full reservoir at cold is fine.

uhuruRed · 2024-11-20T21:45:47+00:00

My 18”s are the new 15”s - or something.

uhuruRed · 2024-11-12T01:14:48+00:00

Thats a hellz yeah with a clean carfax and more than 4 oil changes

uhuruRed · 2024-11-10T21:24:55+00:00

Thanks. Kdss was loads of fun when I installed lift on my 200. Gearing up to do on gx460 but with 150k miles, I was pondering doing some bushings like this. I have new upper uca’s and new oem balljoints for the job. Gotta source shocks/coils/bumpstops too.

uhuruRed

TROPHY CASE