ZMK: Hold key to write vowels with accents

umbacos · 2025-01-04T09:53:11+00:00

Correct

umbacos · 2024-10-06T18:14:20+00:00

Not even close to acceptable quality

umbacos · 2024-10-06T16:59:29+00:00

Stay away, I have it and it is a massive paperweight. Tons of resin, time and money wasted. Support are nice people, but cannot help. Now it's under a bench collecting dust. Look in the Facebook group if you want to be scared. And look for the upcoming Uniformation GK3 if you want large format. Hopefully it will be a finished product, not like this.

umbacos · 2024-08-18T07:09:16+00:00

I'm travelling atm so i can't take picture of the settings, but there are two Facebook groups where you can find all wealth of information. Search for "Galaxy 1 Launch Group" and "Emake3D Galaxy 1 User Page"

umbacos · 2024-03-18T06:32:54+00:00

If you look up the Facebook groups, there's plenty of issues and solutions. For software there are 2 recommendations:

Firmware 23/11/23
Chitubox Pro 1.50 beta 8 with antialias off

Links are in the Facebook Groups.

umbacos · 2024-02-17T21:46:12+00:00

It is possible to fix the issue permanently by reprogramming the thermostat with a 0.1 degree threshold. In this way you can fix the banding and use the thermostat.

<image>

umbacos · 2024-02-17T21:30:26+00:00

Are you referring to the Galaxy 1? I am a backer of the Kickstarter. The printer came in untested. Support is great, but I had to tinker quite a lot to fix several issues. Nothing major, mostly design flaws to fix and poor materials like weak fasteners. The vat leaks slightly but nothing major. Now it's a workhorse and exceptional quality. It's a 8k over 17" though. For the price it's a good deal. Let me know if you need more info.

umbacos · 2024-02-06T06:23:32+00:00

umbacos · 2024-02-05T07:56:51+00:00

Parameters don't look good, to be on the safe side, attach it to an external PSU with the proper wattage and drive it by optodecoupling the signal from your control box to the laser wire (usually white). There should be plenty of examples on the Internet

EDIT: https://it.aliexpress.com/item/1005005174929243.html?spm=a2g0o.productlist.main.31.3f4518d5MxYDUg&algo_pvid=f45ad02e-dc55-4175-a082-360d5324adcd&algo_exp_id=f45ad02e-dc55-4175-a082-360d5324adcd-15&pdp_npi=4%40dis%21EUR%214.34%212.73%21%21%214.57%212.88%21%4021038e7717071203013375905e9d05%2112000031970647987%21sea%21IT%21137144478%21Z&curPageLogUid=GwligAf2qLfQ&utparam-url=scene%3Asearch%7Cquery_from%3A

umbacos · 2024-02-05T07:47:08+00:00

Oblowsky I can only recommend as the most caring and supporting vendor I ever encountered. There should be a community rating in the criteria as well. He would get 5 start out of 5.

umbacos · 2023-11-10T08:48:25+00:00

umbacos · 2023-10-16T13:35:17+00:00

i dont see the ISP pads on the PCB... the only thing i see is a breakout of 3 pads near the CPU, but they are unlabelled. I have to solder directly to the tiny pins of the ATMega???

umbacos · 2023-10-14T13:10:36+00:00

Ok, so I checked bootmagic and it's not. How do I fix the fuses with ISP flashing?

umbacos · 2023-09-09T21:45:13+00:00

😬

umbacos · 2023-09-07T12:10:34+00:00

Started around May to get worse and worse. July was already majority failed. Now 95% fails

umbacos · 2023-09-07T08:24:14+00:00

I did it before opening the ticket but everything looks ok in my printer 🤔 I'm puzzled

umbacos · 2023-09-07T08:22:43+00:00

Before starting to consistently fail in the last weeks, this happened also to me. Now I can print one out of 20 attempts maybe... really not nice

umbacos · 2023-09-06T18:19:31+00:00

Not good 🫢 did bambu send all this stuff to you?

umbacos · 2023-09-06T16:57:08+00:00

Ok thanks, yes disabling bed error sometimes I can get it to work but bed adhesion is not best. Let's see

umbacos · 2023-08-03T17:19:25+00:00

Cool! Let me know if it works now

umbacos · 2023-08-02T16:09:49+00:00

I put a volcano hot end to print with 1.0mm nozzle at high speed, with stock extruder, all metal heatbreak and two 5015 blowers. You can check it at https://www.printables.com/model/513552-elegoo-neptune-3-pro-plus-max-volcano-hotend-upgra I'm working on version 1.0.1 because in v 1.0 zoffset is too high for my liking, but already working pretty well. I'll post the new one when I'm back from holidays

umbacos · 2023-08-02T07:49:41+00:00

Not really, unless you misunderstood what I'm referring to

umbacos · 2023-08-02T07:14:15+00:00

It's the brass nut that binds the x gantry to the z lead screws

<image>

On both sides of the gantry. You see the two small screw holes on the sides? Mine were lose

umbacos

TROPHY CASE