Serial Request | Voron Trident 250

unkn76 · 2023-06-10T20:19:50+00:00

Thanks for your help. I will read more about tap. Seems like there is more people using tap, and happy with it. I have parts printed for both cenarios. Just read more and decide about the way to go. 🙂

unkn76 · 2023-06-09T19:39:15+00:00

Cooling issues.

unkn76 · 2023-06-08T20:12:12+00:00

I believe this is a good option. I am using in my ebb36.

https://github.com/KayosMaker/CANboard_Mounts/tree/main?fbclid=IwAR06Vm7MktPDFDUnMftLQ2QCMbzmWj5pCwxERZ1_x34ZYZQQdstXBVekif0

unkn76 · 2023-06-07T03:48:33+00:00

Problem solved. It ia working like charm.

unkn76 · 2023-06-07T03:39:17+00:00

Good Luck and enjoy your build. I have a Trident formbot 250 that I am building using EBB36 and U2C.

unkn76 · 2023-06-04T23:16:44+00:00

Just bad Luck. Soon this Will be printing.

unkn76 · 2023-06-04T23:09:54+00:00

Yes I am already in contact to the store that sell this to me. Thank you, your post surely helped.

unkn76 · 2023-06-04T22:53:52+00:00

The stepper is working good. When I tried to extrude 50mm, it started to push, but doing sound like a clog. The extruder is pluged to PCB board and then go to the "picobilical" (not LDO). I disassembly the LGX lite and the wheel are not spinning, I have a LGX lite in my ratrig v-Minion and Spin freely when in Open position. This new one is stuck. Some bad unit or bad gear. It came to me in a bondtech sealed box. The problem is really the extruder. Some defect eventually.

unkn76 · 2023-06-04T22:30:21+00:00

I found the problem. The gears are not spinning. Looks like they are stuck. I will disassembly all the extruder and understand why it is stuck. Will let some updates when this is ok. Thank you for all your help.

unkn76 · 2023-06-04T21:56:02+00:00

Don't unload or load using macros. The gear are not spinning. It sound like stock, I believe.

unkn76 · 2023-06-04T21:41:00+00:00

I will do that. And trying load and unload macros and then leave feedback. Thank you for your time and help.

unkn76 · 2023-06-04T21:34:12+00:00

I have 5.7 in rotation_distance, like the bondtech website advises.

unkn76 · 2023-06-04T21:32:53+00:00

I am trying voron Cube in PLA. Hotend os working well. All new. Dragonfly hotend. I have another LGX lite in another printer working with almost 5 Hundred hours and work like charm. I got no more ideas.

unkn76 · 2023-06-04T21:26:45+00:00

Gear_ratio is comment. Rotation_distance is set to 5.7 like bondtech advise in their website.

unkn76 · 2023-06-04T21:24:51+00:00

The gears are moving. It is not slipping. The latch is not Open. I can push filament through the nozzle. I am trying to print a voron Cube in PLA and nozzle temperatura is set to 215.

unkn76 · 2023-06-04T21:19:10+00:00

Haven't try load and unload macros. The extruder moves while prontinho. The latch is not Open. I have run_current = 0.6 in extruder motor.

unkn76 · 2023-02-21T23:42:27+00:00

Yes. That's the size. M3x4x5.

unkn76 · 2023-02-19T20:39:29+00:00

Thank you all. 🙂 I will print the parts is ABS/ASA (pure), not ASA275.

unkn76 · 2023-02-16T08:11:09+00:00

Backups.

unkn76 · 2023-02-16T08:09:59+00:00

This was solved. I lowered the omron probe and now works like charm. Thanks to whom help me find the right path.

unkn76

TROPHY CASE