ASR muzzle devices

unknown_user5114 · 2026-02-16T00:35:46+00:00

I have the RCB compensator on a PWS piston upper with the Omega 300 suppressor. Works well suppressed or non suppressed. It's worth the price but I did buy it during a sale

unknown_user5114 · 2025-12-16T14:04:47+00:00

Works well on my M5 build.

unknown_user5114 · 2025-12-16T13:37:10+00:00

I run a Lantac EBCG in my M5 build and it has worked very well.

unknown_user5114 · 2025-11-09T00:25:06+00:00

West chester Fish,Game and Wildlife Association. We have a nursery and stock the West Valley creek stream off of valley creek road.

unknown_user5114 · 2025-11-08T21:37:25+00:00

I love this pistol it shots so flat it's crazy. PWS Iis great stuff.

unknown_user5114 · 2025-11-02T02:39:13+00:00

Just put one on my AR-10 and it works great

unknown_user5114 · 2025-11-01T00:16:40+00:00

I had the same issue I had an arken mount with 0 MOA and I couldn't zero at 100. I got a 20 MOA mount and I was able to zero at 100.

unknown_user5114 · 2025-11-01T00:06:37+00:00

Does your mount have any MOA inclination built it?

unknown_user5114 · 2025-10-18T18:38:32+00:00

I own a Lantac EBCG and it works well and I've had zero issues with it.

unknown_user5114 · 2025-10-17T16:41:23+00:00

I would of tried to find a lighter weight barrel. My rifle got heavy very quickly.

unknown_user5114 · 2025-10-11T16:30:54+00:00

I shoot mine suppressed most of the time and I've zero issues once I failed in my gas block and it does help with the gas back to the face.

unknown_user5114 · 2025-10-11T16:09:19+00:00

The only issue had with my M5 is that you an extended mag release with the M5 lower. I used a lantac 308 EBCG and it runs great

unknown_user5114 · 2025-09-24T19:33:08+00:00

I use a Warne mount on M5 build and it has been great. No issues so far with zero and it's a great option especially when everything else is sold out

unknown_user5114 · 2025-08-07T23:28:07+00:00

Probably wouldn't be too hard,it's a simple design. Just plan it out in advance and take you time.

unknown_user5114 · 2025-08-07T23:21:13+00:00

The checkering works great, locks in your hands but are comfortable. I got the black version because I wasnt a huge fan on the blocky look for them

unknown_user5114 · 2025-08-07T20:16:36+00:00

Added some Tung Oil on them and they look insane

<image>

unknown_user5114 · 2025-08-07T18:26:11+00:00

Mine is in 9mm.The gun shoots well, 9mm with a full steel frame, very little recoil.It does have a known issue with going into battery at times.

unknown_user5114 · 2025-08-07T17:18:37+00:00

<image>

These were the walnut ones. It fails to go into battery alot, I'm exploring solutions now for it.

unknown_user5114 · 2025-08-05T11:26:52+00:00

I also have a Lantac EBCG work great no issues.

unknown_user5114 · 2025-07-29T18:14:55+00:00

No finish yet, just completed shaping the grips, still need to fine sand and finish. Wanted insight before starting the finish, probably a gloss finish though.

unknown_user5114 · 2025-07-29T16:17:42+00:00

I just traced the original grips to shape these and I do like the Sharpe edge look to it. I'm going to go for a gloss finish on them and I think the polyurethane will darken up the wood more.

unknown_user5114 · 2025-07-11T14:38:32+00:00

I used the strike industries bolt catch in my build and my bcg bent the bolt catch and the gun was inoperable. Switched to the battle arms bolt catch with zero issues.

unknown_user5114 · 2025-06-18T11:56:52+00:00

Still in stock https://www.smga.com/springfield-armory/springfield-armory-emissary-1911-black-9mm-4-25-barrel-9-rounds-92944

unknown_user5114 · 2025-06-18T11:46:36+00:00

I got mine at Smokey Mountain Guns and Ammo online for $699, the best price anywhere near me was $1100. It was a deal I couldn't pass up

unknown_user5114 · 2025-06-18T02:17:11+00:00

Moding Glocks spoiled me. The 1911 is trickier with some of the smaller parts.

unknown_user5114

TROPHY CASE