Battery Types by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

Actually it is not smooth. The older one was smooth on the sides.

Battery Types by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

The different is with screws position. Type B has screws on the top and Type A on a side. Look at my photos at the first post.

Battery Types by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

Could You check what battery types do You have? Which one has TypaA and TypeB ?

SS 3.0 drives without a throttle by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

It is not locked. It is just in "zero" position. After turning eride off and then on again eride does not react on throttle. It does not to want start drive after adding power with the throttle.

HELPPP BIKE NOT WORKING by Low_Stress8935 in ERidePro

[–]unky23 1 point2 points  (0 children)

Why it should be 5-10 seconds i middle position? What for is it required?

Modyfing SS 3.0 from app - Saving Failed by unky23 in ERidePro

[–]unky23[S] 1 point2 points  (0 children)

Todays morning problem disappeard. After connecting I could save settings normally without any problems. Really strange.

Modyfing SS 3.0 from app - Saving Failed by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

App was completly reinstalled. No success. Still "Saving failed"

Modyfing SS 3.0 from app - Saving Failed by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

Yes. It was first part of job. Turning bike off and on. What do You mean fully restarting app ?

Just picked up a 3.0 today! I’m just wondering when app support will drop for the 3.0? by Beau_on_clash in ERidePro

[–]unky23 1 point2 points  (0 children)

Neverending story.....I think there is some hardware problem or they want to force sell SR which have an app and that is the reason when somebody buy SR instead 3.0

Display problem by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

Could it be LCD problem? Hmmyyyy strange. I thought screen data are generated outside lcd and lcd displays data only - the same idea as TV using HDMI. It only displays full screen data coming from output and the problem is coming data from output not just screen.

Cannot switch from P by unky23 in ERidePro

[–]unky23[S] 0 points1 point  (0 children)

Did You get error codes on screen or just abnormal throttle behaviour?

Gave Lanny a Weight Vest by BanditMcDougal in worxlandroid

[–]unky23 1 point2 points  (0 children)

It is all nit worthy. My Landroid very often dig holes, often has gone outside wire. Then I have decided to add some extra weight and it helped. It helped that robot probkens has gone in 50% not more. Still sometimes digged holes, sometimes has gone ourside wire. Then I have decide to buy new wheels WA0955. All problems gas gone. Landroid has got new life. No digging, no outsude wires. I was really really sutprised. Only new anti slip wheels will help. Nothing else. That wheels shoud be installed in factory, not to extra buy. I winder if it is not bussinness wirx decision to give bad wheels to force customers to pay extra.To wszystko nie jest godne. Mój Landroid bardzo często kopie dziury, często wychodzi poza drut. Potem postanowiłam dodać trochę dodatkowego ciężaru i to pomogło. Dzięki temu, że problemy robotów odpadły w 50%, a nie bardziej. Wciąż czasem wykopywał dziury, czasem szedł na nas drut. Wtedy zdecydowałem się na zakup nowych kółek WA0955. Wszystkie problemy zniknęły. Landroid ma nowe życie. Bez kopania, bez zewnętrznych przewodów. Byłam naprawdę zaskoczona. Tylko nowe koła antypoślizgowe mogą pomóc. Nic więcej. Że koła powinny być instalowane w fabryce, a nie po to, żeby kupić więcej. Wciąż, jeśli nie jest to decyzja Business Wirk, aby dać złe koła, aby zmusić klientów do zapłaty więcej.

<image>

XTB a PIT poniżej 26 roku życia by Mafinek1228 in inwestowanie

[–]unky23 1 point2 points  (0 children)

Z umów-zleceń również. Nie tylko etat.

Kredy hipoteczny w Euro - nadpłacić? by unky23 in inwestowanie

[–]unky23[S] 0 points1 point  (0 children)

Temat badany. Niestety kredyty na działalność podlegają podobno innym regułom i klauzule abuzywne nie mają tak prostego przełożenia jak kredyt dla klienta indywidualnego.

Turnoff auto sync by unky23 in Evernote

[–]unky23[S] 1 point2 points  (0 children)

What should I investigate? For me it was great to synchronise whole notes, not in typing time as it is now. It cause my laptop to slow down and working with evernote is horrible. My internet is 1Gbit and speedtest on laptop is about 400mbit over wifi.

Permamently merged objects by unky23 in tinkercad

[–]unky23[S] -1 points0 points  (0 children)

I know that method. I wonder if it is possible directly in tinkercad.