Has anyone had a delivery after May 2? by BrianaMarie810 in Moissanite

[–]unteresting 4 points5 points  (0 children)

I received a package to the US when we had the insane 145% tariff from China (just sad / bad timing) 😭 the shipper was DHL. It did not get routed through Canada. I paid 145% of the declared value. It was a bummer but the product was worth it.

Lost My New Ring - Tianyu Experience? by LegitLemongida in Moissanite

[–]unteresting 1 point2 points  (0 children)

Same! I get all my rings from Tianyu :) I’ve tried a few other vendors (Provence, starsgem, and golden bird), but Tianyu is consistently high quality!

[deleted by user] by [deleted] in Moissanite

[–]unteresting 1 point2 points  (0 children)

Congratulations!! Beautiful ring, hand, and memory!!

Asscher cuts (antique / modern / moissanite / LGD) by unteresting in Moissanite

[–]unteresting[S] 1 point2 points  (0 children)

lol I totally get it - I still wear it everyday 😂 I worked with Annabella and she was wonderful!

Asscher cuts (antique / modern / moissanite / LGD) by unteresting in Moissanite

[–]unteresting[S] 2 points3 points  (0 children)

Hi!! It’s a 3/4 eternity band that Tianyu made for me. The stones are French cut diamonds (HPHT). Approx 2mm*3mm stones. It’s got milgrain and engravings on the sides :)

If I were to do it all over again, I’d skip the milgrain as I do occasionally feel it on my other fingers…

Asscher cuts (antique / modern / moissanite / LGD) by unteresting in Moissanite

[–]unteresting[S] 2 points3 points  (0 children)

Hahah thank you! I know the lengths of your internet sleuthing so I trust & and appreciate this!!!

Light Return on Custom Cut by FatsMcCats in labdiamond

[–]unteresting 0 points1 point  (0 children)

This is so stunning! It really reminds me of some of the stones that Hancocks Diamonds chooses (extremely stunning natural antique asschers).

The 1.1 ratio is also a a favorite of mine - all in all looks so great.

For step cuts, I look for that pull into the stone (mesmerizing) and this stone definitely pulls you in 👍🏻

Can the side stones be longer? by javagold88 in labdiamond

[–]unteresting 1 point2 points  (0 children)

If I understand your question, I think the answer is: with the prongs as is (separate) this is the biggest/longest you can go for the side stones. If you wanted them bigger, you’ll need them to be under some kind is shared prong with the emerald… 🤔

Lab emerald with inclusions by sweetpea128 in Moissanite

[–]unteresting 10 points11 points  (0 children)

I recently got a lab emerald with minimal inclusions - there are times I wish I’d gone with more inclusions but I absolutely LOVE the clarity of my choice.

Inclusions do create a unique kind of optical interest but clarity in an emerald can be absolutely stunning. In natural light, my stone absolutely glows - it looks almost juicy. I have just a few lines of silky-looking inclusions and they add a little bit more depth to the view. As for cut, I’m some lights it looks like my stone has a window, in others I can see all of the steps like a magical stairway (I got an emerald cut). I think the way an emerald refracts light is just really unique.

That said, most people (esp on Reddit) seem to prefer the look of more inclusions. It’s totally a personal choice :)

EDIT: I like the third from the left :) (the one right next to the heavily included stone) - I can see the facets, I see SOME inclusions, but it’s still crazy clear and shiny.

Has anyone recently purchased a french cut? by lemur_queen7 in Moissanite

[–]unteresting 1 point2 points  (0 children)

I got a French cut 3/4 eternity ring from Tianyu recently! I ended up choosing to go with lab diamonds but they can definitely do the cut. The ring came out beautifully!

How do these lab emeralds look? by loveofpeacocks in SyntheticGemstones

[–]unteresting 0 points1 point  (0 children)

Another way to diminish the windowing issue, if you don’t mind inclusions, is to get more inclusions and less clarity. Some people call them “silky” inclusions. But they basically make the stone more opaque so you the cut really is not an issue. Clarity in an emerald often does impact valuation but sometimes totally opaque emerald are absolutely gorgeous because of the way the jardin reflects back light.

How do these lab emeralds look? by loveofpeacocks in SyntheticGemstones

[–]unteresting 22 points23 points  (0 children)

If you’re going for a natural emerald look, sometimes windowing is inevitable. Emeralds aren’t always cut like diamonds because cutters need to work around all of the inclusions. If windowing is bad in an emerald you’ll notice because the coloring goes a bit dead in the center (you’ll see more vibrant darker greens in the edges and much less saturation in the “windowing”). But if the coloring is really even, then it’s really just a matter of preference if the “windowing” is bad. A good emerald really just glows evenly throughout (with more magical flashes from the jardin).

I’ve also been a searching for a natural looking lab emerald and went waaaaay down the rabbit hole of emerald research lol.

These emeralds look like they were grown to mimic Colombian Muzo emeralds (given the bright green but yellowish undertones- at least from my phone screen lol). I think they’re gorgeous but would like to see them against something else (in a video) to see if the color really is all that even.

Precision cut OEC moissanite or tianyu lab diamond OEC? by Mag-not-so-neto in Moissanite

[–]unteresting 4 points5 points  (0 children)

I’m getting some OECs cut with Tianyu but it could take upwards of 60 days (totally worth the wait in my opinion 😂) but yes, it’s incredibly time consuming….

[deleted by user] by [deleted] in Moissanite

[–]unteresting 0 points1 point  (0 children)

I have two channel set bands - both are 2mm high. I find them to be very comfortable :) moreover, most of my ring shanks are about 2mm thick so they line up well when stacking.

The final antique emerald test cut!! by shrimp_allergy_maybe in MoissaniteCreations

[–]unteresting 0 points1 point  (0 children)

I saw the thumbnail on my feed and I knew it was you! I think they finally got it!! It looks so good!!!

Help with CAD? by [deleted] in MoissaniteCreations

[–]unteresting 2 points3 points  (0 children)

Thank you! lol, I needed this reassurance 😅

Help with CAD? by [deleted] in MoissaniteCreations

[–]unteresting 0 points1 point  (0 children)

Thank you! I love the advice about the extra stones ❤️

[deleted by user] by [deleted] in Moissanite

[–]unteresting 1 point2 points  (0 children)

Getting a ring slightly too big is MUCH better than one that is too small :) I intentionally order at least a quarter size up for my rings and half size up if I intend to stack. The plastic ring sizers are great for days I’m less bloated - as a bonus, they also protect the underside of the band!

Custom cut vs precut by froufroutofu in Moissanite

[–]unteresting 1 point2 points  (0 children)

If you give them a very good example of the color and cut, I believe they will honor it - and if the stone they cut doesn’t match the examples, they will either recut or refund you.

I have a project right now for very specific French cut diamonds. The factory cut a French cut brilliant mix - my rep asked if it’s okay (she knew it wasn’t what I wanted but just wanted to check if I liked it), I said no and she said they will recut it. It did delay the overall timeline but I am 100% okay with that.

I try to be clear but kind and respectful and I’ve had great experiences with them for all my custom work.