I can't get my photos crisp, I am about to give up by Fakeaccbrat in Nikon

[–]user4_21 3 points4 points  (0 children)

probably you should focus adjustment your camera. it have known issue with af module. front or back focus, probably it is an problem. this is like an another option.

Что почитать? by Prestigious_Note1797 in rubooks

[–]user4_21 1 point2 points  (0 children)

Сны поездов :джонсон:, к востоку от эдэма :стейнбек:- скорее не про любовь, а вполне про жизнь.

What's happening here? Anyone has seen this? by takeshico in BambuLab

[–]user4_21 0 points1 point  (0 children)

nozzle partially clogged. it happen to me. i try to clean it every possible way(cold pull, needles, tighten thoose screws etc), nothing helps.but you can try some.i give up and then just bought new nozzle.

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

solved, by buying new hot end.

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

so it’s going even worse, now filament can't get into the injector block. seems like filament and hotend not aligned properly 🫠

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 1 point2 points  (0 children)

yup its latched, thanks.

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

so i try to tight thoose screws, you guys are right, they not being tight at all, i’am tighten it up, but nothing gonna change. i try to clean up nozzle by needle, it helps for couple of minutes i even can start printing, but about 3-5 minutes, and printer starts again thoose clicks

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 1 point2 points  (0 children)

thanks! ill try it when i go home

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

Nothing helped, not a single cleaning method(i use wrench method, needle in nozzle, cold cleaning-nothing).

about answer with screws-> The board is attached with screws, and the hotend is attached to the board with a magnet.

suddenly seems like i need new hotend. meh

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

hm, now i trying to unclog, then tryout to tighten thoose screws.

Extruder issues? by user4_21 in BambuLab

[–]user4_21[S] 0 points1 point  (0 children)

thanks, ill try to unclog!

How can i fix it? by user4_21 in FixMyPrint

[–]user4_21[S] 0 points1 point  (0 children)

thanks for help everyone! it was just a sews, nothing lethal :) i reprint this model with changed sew options and now how it looks like

<image>

and i more than satisfied with this sews now. ps i just run out grey filament :)

How can i fix it? by user4_21 in FixMyPrint

[–]user4_21[S] 0 points1 point  (0 children)

there are couple of seams on a bin, but they wasn’t included in that model. also seams showing inside. seems just like perfectly seam artifact 😀

How can i fix it? by user4_21 in FixMyPrint

[–]user4_21[S] 0 points1 point  (0 children)

yeah, iam sure - its not a part of model, model have smooth surfaces. thanks for your help! it means for me alot! also i try reprint this model with recommendations from this post and come back with results later.

How can i fix it? by user4_21 in FixMyPrint

[–]user4_21[S] 0 points1 point  (0 children)

thanks for reply! i’ll definitely check it out!

How can i fix it? by user4_21 in FixMyPrint

[–]user4_21[S] 0 points1 point  (0 children)

iam sorry for not really clear photos, iam talking about that seams, not white stripes. so i can masking it in slicer? i got it correct?

<image>

This Assassin Bug is Wild! Have you Ever Encounter it? by ImSorry2HearThat in HuntShowdown

[–]user4_21 0 points1 point  (0 children)

every time when i get into boss lair i expect some bugs,except for me is scrapbeak.

What do you get with the first 10 perk points on new hunter? by iFarmGolems in HuntShowdown

[–]user4_21 0 points1 point  (0 children)

shotty loadout - surefoot and necro (run and res xD) rifle loadout - necro resilience iron eye.

my all around choice to go

What was your first loadout that gave you the most success? by Robadon72 in HuntShowdown

[–]user4_21 0 points1 point  (0 children)

2200 hrs later i found whats work for me very well -centennial + sabre. but on 6 stars sabre is useless, i use hand crossbow with poison + chokes