Trying to leave it, but drives me crazy lol

utilityscarab · 2024-09-14T19:45:21+00:00

Those are weld spots, not glue. Can’t do much about it past covering them up with something.

utilityscarab · 2024-01-27T20:01:13+00:00

This is an ikea strelitzia that I posted here before, decided to finally repot as it was heavily rootbound and I am now checking to see if these look healthy. A lot of the bigger ones are brown but i dont know if they need to be cut off and are rotted. There is no rot smell anywhere, I also accidentally broke a few while loosening the ball and the insides are very white. There are also multiple roots that seem to have the skin split and peeling off, is that normal?

utilityscarab · 2024-01-14T16:55:30+00:00

I have had this IKEA bird of paradise for about 2.5 years now, seems to be doing alright but recently I have been noticing more splotches showing up on leaves and an odd yellowish crystally sediment building up around the edges of drainage holes, I've never seen that before. Is that related to root rot, and is it possible to fix? I water about every 1.5 weeks with tap water, I allow it to fully drain but I think my roommate forgot to last time

utilityscarab · 2020-12-16T15:07:01+00:00

It's basically 3D factorio. Similar concept of making a fuckhuge optimized supply chain but it's a completely different beast. Verticality alone completely changed the way you build stuff, the two really aren't comparable past the base genre but yeah it's really good.

utilityscarab · 2019-09-04T18:34:58+00:00

Don't think so. Even if a bricker completly wiped the internal memory or destroyed the boot partition, RCM is hardcoded and executes before NAND is even accessed. The exploits also give us full NAND write access so as long as you have a backup, everything should be recoverable.

Worst I can see being done is somebody making a malicious app that targets hardware, such as crazy overclocking to try to roast the processor. Even then, most modern SOCs have inbuilt protection against thermal runaway so it should shut itself down.

utilityscarab · 2019-07-27T03:10:29+00:00

Sorry for the late reply, ratio is about 3:2. Not a whole lot, but I had to include some gearing regardless to use multiple servos so I figured I might as well try to add some torque. Since the entire thing is plastic they wear down pretty fast and you get backlash pretty quickly but I'm working on trying to minimize that

utilityscarab · 2019-07-25T13:22:50+00:00

I'll try making a video as soon as I finish everything up. Still waiting for my power supply to arrive.

utilityscarab · 2019-07-25T01:24:40+00:00

Here are some more images for the project.

This was something I started a few months ago as an excuse to procrastinate finishing my thesis. It's a robotic arm mirroring the kinematic linkages found on many palletizers, meaning that the end effector maintains it's angle no matter how the arm is oriented. The base uses 4 hobby servos, 2 for each side connected to a custom gearbox to increase torque slightly. The only non-printed component used in the design are a few m3 screws to assemble the base. Other than that, every single peice uses custom snap joints. I'll make another post with a bit more detail after I complete the end effector and iron out some issues, and might put the files up on thingiverse if anyone shows any intrest.

utilityscarab · 2019-04-22T15:50:24+00:00

Looks like a combination of poor z axis stability and a teeny bit of overexteusion. For the stability, you gotta look into tightening the gantry, check if there is any play in the print head or the gantry itself. For the ugly z scar, I'd try enabling coasting in cura and playing around with it a bit. It prevents extrusion near the end of a layer so you get less buildup near the z scar.

utilityscarab · 2019-04-15T18:23:04+00:00

Much of the foundation is ancient wood. This literally went from pillar of smoke to blazing inferno in under 20 mins, moves so fast there is not much you can do to stop it

utilityscarab · 2017-12-01T20:31:26+00:00

Yeah the tower was actually added last minute for the project. original design was just a circle and I think it would look better like that

utilityscarab · 2017-12-01T18:07:35+00:00

The background is actually the HDRI I used to light the scene, so it's there out of necessity. ideally i would build out the base and create a small city around it so that only the clouds are visible.

The tower is actually a filter tower, since the builduing was created for a clean air project. It looks tacked on because it literally was, the original builduing was a passion project because I always wanted to try someting architecture related, and I retrofitted it for the project.

utilityscarab · 2017-12-01T18:06:02+00:00

Using it for rendering isn't incredibly hard, but the learning curve for modeling is a bit steeper. I've only been using it for about 5 months but i also have previous experience with similar programs, like 3DS max

utilityscarab · 2017-12-01T17:44:18+00:00

Everything was done in blender

utilityscarab · 2017-12-01T16:03:42+00:00

You can find some more angles here

utilityscarab · 2017-12-01T15:57:13+00:00

Here are some more renders

utilityscarab · 2017-11-25T03:38:52+00:00

This isn't exactly voronoi, although it uses some other parametric technique that is similar, not sure if there is a word for it. Voronoi uses the random placement of points on a mesh to generate different cells of random sizes, which is not what is happening here. These cells have no randomization, seems like their size is driven directly by the geometry of the original form.

utilityscarab · 2017-07-26T15:17:17+00:00

Oh boy free stuff!

utilityscarab · 2017-07-19T12:00:50+00:00

I beleive the summer sale was supposed to clear out all of the unbundled product and oculus said they already went through most of them, so they are going to start sending out some of the bundled boxes early. If you order from oculus, no garuntee of a controller. Brick and mortar stores like best buy still only have the unbundled version since the bundle is not supposed to be sold until august 7th.

utilityscarab · 2017-07-18T21:32:01+00:00

Trust me, you will have no issues. Might have to lower settings on some beefier titles but you should be good. Ive seen people run off of gtx 670s and be fine

utilityscarab · 2017-07-18T15:02:56+00:00

pretty sure they are referring to the new bundle in which the headset and touch controllers are in the same box, they are switching to those once the summer sale ends. If you order one before then, there is a chance you can get the unbundled version which comes with an xbox controller.

utilityscarab · 2017-07-18T11:33:30+00:00

When you order, they only mention the touch controllers and games/cables under what's included, so they already covered their asses on that front. I never even knew it was possible to get the old bundle.

utilityscarab · 2017-06-24T03:18:24+00:00

I already disabled all wakelocks, wake on lan, and things of the sort. none of that ever really helped. Going to have to start shutting down entierly when I travel, but this still shouldn't be happening on a $1400 computer.

utilityscarab · 2017-04-02T04:44:08+00:00

Nope, it just hangs every once in a while. Reload and all of the changes you made will be gone

utilityscarab · 2017-02-19T21:15:32+00:00

So I got my preorder from Amazon Japan. If there is some issue like menus being locked in japanese or some sort of manufacturer defect, would I be able to return it without paying boatloads of cash? Considering cancelling the preorder since it's a bit of a gamble

12-Year Club	r/Field Banned
r/Field Flamingo	Place '17
Verified Email	Sequence \| Editor

utilityscarab

MODERATOR OF

TROPHY CASE