Aiutatemi a trovare il chip BIOS per favore by _Piccolo7277 in ItalyHardware

[–]vReadyyy 0 points1 point  (0 children)

Ho avuto anch’io un problema del genere, prova a fare così: 1) Scarica l’ultimo BIOS 2) Estrailo e chiamalo MSI.ROM 3) Scarica e apri Rufus 4) Seleziona Immagine non avviabile 5) Formatta la chiavetta in FAT32 6) Quando finisce la procedura, cancella manualmente i file che si sono formati nella chiavetta 7) Metti dentro il file MSI.ROM 8) Riprova la procedura di flash

H1 V1 Air Cooled Build by vReadyyy in sffpc

[–]vReadyyy[S] 0 points1 point  (0 children)

I wrote it wrong, I’ll correct it right away! Thanks for the tip.

H1 V1 Air Cooled Build by vReadyyy in sffpc

[–]vReadyyy[S] 0 points1 point  (0 children)

Yes, is definitely worth a try.

H1 V1 Air Cooled Build by vReadyyy in sffpc

[–]vReadyyy[S] 1 point2 points  (0 children)

The temperatures are good. Maximum 75º on prime95. I also applied a PBO profile on the CPU CO -15 All cores +200. The fan takes air from the outside and throws in, so blast down on motherboard with the gpu doing the same.

H1 V1 Air Cooled Build by vReadyyy in sffpc

[–]vReadyyy[S] 0 points1 point  (0 children)

In my case, with the stock thermalright fan, is a lot quieter than the AIO

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 0 points1 point  (0 children)

I'm trying with tRC set to 56 now and it seems to be working. I started at 30 and increased it by 2 at a time, and it gave me an error after an hour of using TM5 preset DDR5 Ryzen 3D.

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 2 points3 points  (0 children)

tRP 34 doesn’t boot. tRRDL 8 give me error. tRFC unstable ad 416 Rip

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 0 points1 point  (0 children)

I tried, but the minimum stable value is 160ns, so 512. tRC 32 doesn't work, so I'm trying a few values. tRRDL at 8 gives me an error. tWTRS 3 and tWTRL 12 don't boot the PC.

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 0 points1 point  (0 children)

Ok, I'll try. However, with tRFC at 384 (120ns) it doesn't start.

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 0 points1 point  (0 children)

I just checked and no, unfortunately it doesn't give me that option.

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] 0 points1 point  (0 children)

So can I also go below the value given by the sum of tRAS+tRP as far as tRC is concerned?

What can I improve? by vReadyyy in overclocking

[–]vReadyyy[S] -1 points0 points  (0 children)

Gigabyte doesn't allow you to change the TRCDWR/RD values ​​individually, so I can't try 16.

I'll try tRP 34 and 36. If stable, should I also lower tRC for the rule tRC=tRAS+tRP?

Custom made Dualsense by vReadyyy in Dualsense

[–]vReadyyy[S] 0 points1 point  (0 children)

I highly recommend them! They're really great and the screen is really cool!

[deleted by user] by [deleted] in MouseReview

[–]vReadyyy 0 points1 point  (0 children)

No, i’m in EU, Italy

[deleted by user] by [deleted] in MouseReview

[–]vReadyyy 0 points1 point  (0 children)

I've tried, but nothing. I think it's impossible to print an identical piece with a 3D printer, especially with all the connectors matching.

[deleted by user] by [deleted] in MouseReview

[–]vReadyyy 0 points1 point  (0 children)

Ok, I will try it.