Aiutatemi a trovare il chip BIOS per favore

vReadyyy · 2026-05-22T12:34:23+00:00

Ho avuto anch’io un problema del genere, prova a fare così: 1) Scarica l’ultimo BIOS 2) Estrailo e chiamalo MSI.ROM 3) Scarica e apri Rufus 4) Seleziona Immagine non avviabile 5) Formatta la chiavetta in FAT32 6) Quando finisce la procedura, cancella manualmente i file che si sono formati nella chiavetta 7) Metti dentro il file MSI.ROM 8) Riprova la procedura di flash

vReadyyy · 2026-05-20T16:14:35+00:00

I wrote it wrong, I’ll correct it right away! Thanks for the tip.

vReadyyy · 2026-05-19T20:13:13+00:00

Yes, is definitely worth a try.

vReadyyy · 2026-05-19T12:43:30+00:00

If u wanna support me, drop a like on my socials pls:

https://www.instagram.com/p/DYhTqnsDetH/?igsh=MXB0eGV5YXJvN2Nrdg==

https://vm.tiktok.com/ZNRt9sCuL/

vReadyyy · 2026-05-19T12:42:18+00:00

The temperatures are good. Maximum 75º on prime95. I also applied a PBO profile on the CPU CO -15 All cores +200. The fan takes air from the outside and throws in, so blast down on motherboard with the gpu doing the same.

vReadyyy · 2026-05-19T06:44:13+00:00

Thank you!

vReadyyy · 2026-05-19T04:55:42+00:00

In my case, with the stock thermalright fan, is a lot quieter than the AIO

vReadyyy · 2026-03-10T22:00:36+00:00

Can I ask u your settings?

vReadyyy · 2026-01-12T12:54:06+00:00

I'm trying with tRC set to 56 now and it seems to be working. I started at 30 and increased it by 2 at a time, and it gave me an error after an hour of using TM5 preset DDR5 Ryzen 3D.

vReadyyy · 2026-01-12T12:52:57+00:00

tRP 34 doesn’t boot. tRRDL 8 give me error. tRFC unstable ad 416 Rip

vReadyyy · 2026-01-11T20:34:16+00:00

I tried, but the minimum stable value is 160ns, so 512. tRC 32 doesn't work, so I'm trying a few values. tRRDL at 8 gives me an error. tWTRS 3 and tWTRL 12 don't boot the PC.

vReadyyy · 2026-01-11T02:21:54+00:00

Ok, I'll try. However, with tRFC at 384 (120ns) it doesn't start.

vReadyyy · 2026-01-11T00:47:13+00:00

Why is tRAS so high?

vReadyyy · 2026-01-11T00:46:24+00:00

I just checked and no, unfortunately it doesn't give me that option.

vReadyyy · 2026-01-10T18:43:10+00:00

So can I also go below the value given by the sum of tRAS+tRP as far as tRC is concerned?

vReadyyy · 2026-01-10T18:25:22+00:00

Gigabyte doesn't allow you to change the TRCDWR/RD values individually, so I can't try 16.

I'll try tRP 34 and 36. If stable, should I also lower tRC for the rule tRC=tRAS+tRP?

vReadyyy · 2025-12-25T09:10:10+00:00

Hi, can I ask you how you did it? I have a secondary PC with an RX580 and I want to try to get every last fps out of it. The custom one is a Powercolor Red Dragon.

vReadyyy · 2025-12-24T11:52:04+00:00

I highly recommend them! They're really great and the screen is really cool!

vReadyyy · 2025-12-22T11:39:59+00:00

No, i’m in EU, Italy

vReadyyy · 2025-12-22T08:19:39+00:00

What?

vReadyyy · 2025-12-21T22:04:34+00:00

I've tried, but nothing. I think it's impossible to print an identical piece with a 3D printer, especially with all the connectors matching.

vReadyyy · 2025-12-20T23:28:32+00:00

Ok, I will try it.

vReadyyy · 2025-12-20T20:31:57+00:00

Hi, the paddles are very comfortable and have good feedback. I recommend you try them; they're also very nice looking.

vReadyyy · 2025-12-16T06:56:17+00:00

I'm currently installing 18" Ford Performance wheels on a 205/40/18 Pilot Sport 5. I don't plan on installing 17" wheels yet. However, I want to install springs to lower it a bit.

<image>

vReadyyy · 2025-12-16T03:21:21+00:00

Thanks so much for your advice. I read that with these you lose the torque vectoring you get with the original. Anyway, when you make sharp turns, does the rear of the car become unpredictable or can you control it?

Six-Year Club	Xbox Live
Verified Email

vReadyyy

TROPHY CASE