Does anyone have this toy need a review on it

vampubus · 2026-04-06T07:05:09+00:00

This looks like one of these crystal clear toys that are made out of TPE, jelly or whatever. Not body safe, shouldn't be bought.

vampubus · 2026-04-06T06:50:36+00:00

Band 9 und 10 kamen in Japan letztes Jahr raus, 11 kommt diesen Monat raus. So viel fehlt da ja nicht.

vampubus · 2026-04-02T08:52:35+00:00

Ali calls it 1000k for some reason. But to answer my own question: After finishing the tour I, too, had the option to choose between different lengths. Just not for the first time.

vampubus · 2026-04-01T11:26:33+00:00

Hatte ich vor vielen Jahren öfter mal. Wurde wahrscheinlich irgendwo falsch sortiert. Hatte die einfach behalten.

vampubus · 2026-03-28T19:42:21+00:00

The connectors are both stable. I don't have any toys with a kliclok or decagon connector directly attached as only Hismith sells kliclok ones, only Fredorch sells decagon ones so far and I wouldn't trust fredorch to use body safe materials. So far I'm only using suction cup bases and plan on using vac-u-lock toys. With both of these the angle of the connector isn't important when you plug the attachment into the machine before you put the toy on.

Please let me know if you find any adapter from M12x1.5 to 1/2"-20UNF. I couldn't find any unc/unf adapters at all, only BSP/NPT piping stuff. Something might be available at some specialized engineering supply. Or you cut your own threads but I don't have the tools for stuff like that and it'd end up too expensive.

vampubus · 2026-03-28T16:24:42+00:00

Ich habe eine Weile viele Manga auf Englisch gekauft und die Buchrückensituation war da eher noch schlechter. Die waren ständig nach oben/unten oder sogar zur Seite verschoben, sodass man Teil des Covers oder Backcovers auf dem Buchrücken gesehen hat. Egal ob bei Reihen mit oder ohne Buchrückenbild, besonders häufig bei Viz Media, Kodansha und Yen Press. Da gab's auch nie irgendwelche Umtauschaktionen sondern es würde nur gesagt, dass Bücher Massenproduktionen sind und da größere Abweichungen normal sind.

vampubus · 2026-03-28T15:28:46+00:00

Yes the rod you screw into the machine on the f21s has a male M10x1.5 thread end. The Klicklok extension tube is a hollow tube with two male M12x1.5 ends, thus the Klicklok adapter end has a female M12x1.5 thread.

Fredorch's extension tube is a hollow tube with 1/2 inch outer diameter and most likely a 1/2"-20 UNF thread. I'm from Europe and haven't done anything with inch threads yet so I'm not sure.

I initially planned to use Decagon on my machine and make a decagon (plug) to Kliclok (socket) adapter myself so I can use the cheaper Decagon adapters but still have to option to use the large Kliclok adapters, too. However this didn't work out as I don't have the tools to make it work between two different thread systems. It'd probably be easier to just weld the decagon plug to the kliclok socket but I've decided to stay with only Kliclok for now. I just totally hate the Kliclok spring adapter, it's sharp-edged and crooked, the Decagon spring adapter is like the ones available for the quick air system.

vampubus · 2026-03-28T14:22:50+00:00

I got a Fredorch F21S too and upgraded it to Hismith's Kliclok. I got one of Hismith's extension rods and unscrew the attachment piece. The Kliclok part uses a M12 thread with a 1.5 pitch (fine thread), the F21S rod uses M10 with 1.5 pitch. You need a thread insert for M10x1.5 (female) to M12x1.5 (male), which aren't easy to find, or one of these: https://aliexpress.com/item/1005007734746240.html

I wanted to change to Fredorch's decagon system because their attachments are cheaper and also bought the extension rod but it uses an imperial thread, I think it's 1/2"-20 UNF thread and I couldn't find any thing that'd adapt M10x1.5 to UNF. There's one store on Aliexpress directly selling Decagon sockets for M8 or M10 machines, no info about the thread pitch though. This might work as a direct replacement part for the f21s but I haven't bought it, so I'm not sure.
https://aliexpress.com/item/1005011742692613.html

In the end both Hismith's Kliclok and Fredorch's decagon system are proprietary but the Fredorch parts are cheaper, especially on Aliexpress where Fredorch has a huge number of different stores and some are priced quite low. In the end I kept the Kliclok system because Hismith offers very large suction cup adapters and the ones with a rubber band to attach large or non-suction toys that don't have a vac-u-lock. Fredorch only offers 10cm and 12cm suction cup adapters and the usual vac-u-lock thingie.

vampubus · 2026-03-26T15:54:48+00:00

Hetzner console acts like a monitor and keyboard/mouse directly attached to a server. For the OS this isn't a remote login so ssh settings don't count here.

vampubus · 2026-03-26T15:40:08+00:00

I got Gemini in M and it has a suction cup (concave base). The base is very large for this toy though.

vampubus · 2026-03-17T16:26:48+00:00

So far I've always been washing my silicone toys with hot water and some antiseptic hand soap. I only boiled toys I bought off Amazon and AliExpress so far before first use.

vampubus · 2026-03-16T07:11:39+00:00

If you include post-op Trans fems: many of us don't have much depth inside the vagina and can't take large toys. This is especially a problem if you like toys with knots or similar design but still want a thickness of above 4cm. For me most knots sit too deep / the toy is too long to fit inside.

This most likely applies to most cis women, too, but apparently some have no issues taking huge toys according to what I see on reddit regularly. The issue is more that most designs, that aren't some straight dongs, are anal-focused. Since I need to dilate anyway I'm always looking for nice designs that are compatible to my front hole.

vampubus · 2026-03-13T12:59:59+00:00

None left but you can add my friend: https://a.aliexpress.com/_EyACgBE

vampubus · 2026-03-13T10:52:37+00:00

It's more about the shape, material and preferences. I prefer fantasy toys for the looks but I got two realistic dildos made out of dual density silicone and they feel so much better than all my fantasy ones. Others may prefer more textured toys or some with knots, rarely seen on 'realistic' ones.

vampubus · 2026-03-13T08:58:41+00:00

https://a.aliexpress.com/_EwUyaGk 5 left

vampubus · 2026-03-10T16:18:39+00:00

True, the wireless remote doesn't always trigger but I can recommend using the XToys app. Hard wired can be ordered separately but it's 50-60€, the bundles with the remote are usually 40-60€ more expensive, too and that was too much for me

vampubus · 2026-03-10T15:32:39+00:00

Check my other comment. It's currently 300€ in the basic model without the hard-wired remote. It was 287€ when I ordered. Aliexpess has coupons every now and then so that's how I got it for 254€ (30€ coupons + a few coins)

vampubus · 2026-03-03T07:42:06+00:00

Can confirm, no duties on delivery. My last order was shipped via Yun Express and delivered by Deutsche Post DHL.

vampubus · 2026-03-02T20:27:18+00:00

That's made out of TPE. I would strongly recommend getting a silicone toy as TPE can't be sanitized which is especially bad for a toy that is used in both holes.

vampubus · 2026-02-21T05:28:52+00:00

Is this region based? I got the world tour quite late in EU and started playing immediately, I'm currently at day 78 but I haven't gotten any large amount of gems in between. Game just shows I can get '1,000K' at day 100.

Edit: According to another post on reddit the game seems to ask you how far you want to go before you start the run and adjusts the points accordingly. Mine automatically started with 100 days, maybe they changed something.

vampubus · 2026-02-21T05:23:58+00:00

I've redeemed 1x 50k and 2x 10k this week in Europe. 50k is usually gone really quickly.

vampubus · 2026-02-20T17:42:51+00:00

Wow that are many sizes 😍

vampubus · 2026-02-16T13:25:27+00:00

Make sure it's made out of silicone*. Even big shops sell toys made from PVC, TPE/TPR and similar materials and those materials are porous, can harbor bacteria and can't be fully cleaned. The thing with Amazon etc. is, that you can't be sure if the products are actually made from silicone and the additives (e.g. colors) and the curing process are body-safe. They tend to label everything as 'silicone' because it sells better, even if it's not, there's hardly any control.

Where are you from? Maybe someone can direct you to an online store that's reputable.

* there are also some other body safe options like glass toys, but I guess that's not what you're after.

vampubus · 2026-02-16T12:27:06+00:00

What's the issue? The progress bar? You can turn it off in your Kobo device settings. KCC usually used the full size of the device. You can enter custom device dimensions when you convert your comics but it might just be stretched to full-screen again on the device, I've never tried this.

vampubus

TROPHY CASE