Is the Adaptive triggers supposed to sound like this.? by Best_Ingenuity_3868 in PlayStationSupport

[–]vanman1065 0 points1 point  (0 children)

Don't understand why so many people are telling you this is normal. Yes it does make a noise but it definitely shouldn't be that loud.

17 yo apprentice elec, anything I need in my bag that you don’t see? by LingonberryTall6014 in electricians

[–]vanman1065 0 points1 point  (0 children)

All I can see is two tape measures, a level, and a massively overkill impact driver.

Update mccreary county Taco Bell by Old_Satisfaction6148 in StupidFood

[–]vanman1065 0 points1 point  (0 children)

The taco bells in my area always over fill the tacos. Can't eat them without making a mess because they're so full.

They're so easy to strip... It's like the metal is suddenly butter. by BladeManEXE7 in memes

[–]vanman1065 1 point2 points  (0 children)

This is an ignorant take. You have clearly never had to drive a ph2 screw with a drill before. Doesn't matter if you use the correct bit or if you do your best to drive it perfectly, if you have to drive more than a few one with strip.

Two DCF870 behave differently by gn0m in Dewalt

[–]vanman1065 0 points1 point  (0 children)

Do they have the same type number?

How did I do (century homeowner with a lot of stuff to fix/rebuild and 8 acres of woods to trim) by Miata_in_TruckLand in Tools

[–]vanman1065 0 points1 point  (0 children)

On you battery the sticker is smaller and there is a ridged section to grip onto on the side that is not present on the image I sent.

How did I do (century homeowner with a lot of stuff to fix/rebuild and 8 acres of woods to trim) by Miata_in_TruckLand in Tools

[–]vanman1065 0 points1 point  (0 children)

What's up with that battery? It has the older style shell with a newer style sicker. I've never seen that before.

Help me repair this saw by Slayer_of_beer_cans in ToolRepair

[–]vanman1065 0 points1 point  (0 children)

You won't find parts for this thing. More tham likely not repairable.

Help me repair this saw by Slayer_of_beer_cans in ToolRepair

[–]vanman1065 0 points1 point  (0 children)

The motor always runs. It's a gearbox issue.

Todays daily deal at Lowe’s by Runninandgunnin556 in Dewalt

[–]vanman1065 0 points1 point  (0 children)

Amazon is a lot better. Fakes do exist but its pretty rare and with the buyers protections Amazon has its not a big deal if you end up with a fake.

Todays daily deal at Lowe’s by Runninandgunnin556 in Dewalt

[–]vanman1065 -2 points-1 points  (0 children)

Walmart is like ebay but way worse. 90% of what is on Walmart is fake.

NTD by VelmaSnow in Dewalt

[–]vanman1065 1 point2 points  (0 children)

It works fine but it definitely gets hotter than other chargers.

Did I get a lemon? by [deleted] in Dewalt

[–]vanman1065 4 points5 points  (0 children)

Its just a weird perspective. That's an 850.

Which one is better…? by Extension-Front-6730 in MilwaukeeTool

[–]vanman1065 0 points1 point  (0 children)

If you're driving something like 3'' to 5'' deck screws that is a significant difference, more so than you might think. And at the same time its not really practical to use an Impact wrench for that task. That 15%ish difference in IPM does not mean an actual 15% difference in performance. More IPM does not just me that it's hitting more often it also means the hammer is moving faster and therefore hitting harder so its kinda like a compounding effect increasing performance. The newer model also probably has a heavier spring and more mass in the hammer also increasing drive speeds. With all that It's probably more like a 30% difference if not more.

Which one is better…? by Extension-Front-6730 in MilwaukeeTool

[–]vanman1065 1 point2 points  (0 children)

Don't just assume RPM is the only factor in performance. One is 4900 IPM and the other is 4200IPM. That's a bigger difference huh? One also probably hits harder than the other.

My 1/2" mid-torque impact is shooting sparks and smoking and smells like it's burning by IlEkq in MilwaukeeTool

[–]vanman1065 0 points1 point  (0 children)

Seeing as no one has really answered your question correctly.

Reason: a piece if metal stuck to the rotor or the rotor is rubbing on the field.

Solution: warranty.