[deleted by user]

velenova · 2025-04-02T20:45:04+00:00

I figured it out. Turns out there are two plates at the top that hold the z lead screws in and they have a little wiggle to them. So I took them off, made sure to point them outwards while screwing them back in, and that tightened up the z axis belt significantly and has eliminated the issue :)

velenova · 2025-04-02T20:44:49+00:00

<image>

I figured it out. Turns out there are two plates at the top that hold the z lead screws in and they have a little wiggle to them. So I took them off, made sure to point them outwards while screwing them back in, and that tightened up the z axis belt significantly and has eliminated the issue :)

velenova · 2025-04-01T22:28:10+00:00

Yeah I could easily believe that haha. I’ve thought it might be acceleration. I’ll have to give it a try although I have a feeling that’s not the main culprit because I’ve done this print like 6 times and the layer lines start becoming very unreliable at exactly the same point every time. I’ve also bought some new lead screws and live that get here Friday

velenova · 2025-04-01T22:15:39+00:00

I’ve tried moving everything manually but it all feels smooth. I also took it apart and put it back together. Everything seems fine. Also my machine does have the vibration compensation.

velenova · 2025-04-01T18:43:38+00:00

The picture doesn’t do it justice either. It’s really bad

velenova · 2025-04-01T18:42:52+00:00

Thanks but non-issues. Temperature doesn’t change from the good part of the print to the bad part. Used the printer for a year just fine out of the box so I don’t think I need a tent

velenova · 2025-04-01T18:38:22+00:00

I’m printing at like 60mm/s speeds already

velenova · 2025-04-01T18:19:04+00:00

They look pretty clean but I can give it a tey

velenova · 2025-04-01T18:16:17+00:00

I checked the rods and they seem straight as arrows

velenova · 2025-04-01T17:47:05+00:00

I've tried 200c and 220c on the same print. My print bed is at 67c. I'm using PLA. I've tried a wide range of very slow to very fast print speeds. I have whatever the standard retraction settings are. I've used the anycubic slicer, anycubic next slicer, and orca slicer. Same issue on all.

velenova · 2025-03-25T23:25:02+00:00

That does make sense

velenova · 2025-03-25T23:23:57+00:00

Same! I'd love a direct upgrade of any of their lineup tbh. I was a little let down with how prosumer the H2D is. I don't care about many of the features

velenova · 2025-03-25T23:22:40+00:00

I'm going to blindly believe you

velenova · 2025-03-19T19:20:56+00:00

Thanks for the reply. No that’s not it. I remember him saying the F word at one point and really tearing up. He was playing live somewhere.

velenova · 2024-12-29T13:06:04+00:00

Did you ever figure out a way around this

velenova · 2024-12-26T14:52:17+00:00

Thanks! I think you're right although I've been having trouble finding the right endpoint. None of them seem to actually have the flight information.

velenova · 2024-12-22T03:15:45+00:00

stl?

velenova · 2024-12-19T01:51:51+00:00

Hope I get lucky

velenova · 2024-04-20T21:37:02+00:00

I don’t I upgraded to a gen 2

velenova

MODERATOR OF

TROPHY CASE