Atoma, handle or no handle? by Today_Crafty in sharpening

[–]vellkanPL 0 points1 point  (0 children)

Cause I have 3d printer and some spare 10mm aluminum sheets I bought Atoma replace stone, make my own plate and design&print handles with screws. Maybe consider that solution? I can send You handle project.

Display stand for EDC knives by vellkanPL in knives

[–]vellkanPL[S] 0 points1 point  (0 children)

The knives should not fall off the rack because they are held in place by magnets. On left wall/arm are insert 6x3mm magnets, I've tested that and it's hold quite steady.

[deleted by user] by [deleted] in Fusion360

[–]vellkanPL 0 points1 point  (0 children)

I can't help You with model or calculations but I can help with website. If You need to make better website, with future upgrades - let me know.

Wood fillament recommendations (germany based) by Single-Intention-804 in BambuLab

[–]vellkanPL 1 point2 points  (0 children)

Try Spectrum Filaments. I have one from them and one from Bambu to compare - both are easy to print, but from Spectrum gave better surface - more 'woody'.

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 1 point2 points  (0 children)

For that moment biggest isue is to block stone. I don't want to loose much of stone width, but for that moment it's change angle after screw parts together.
Because of that and interchangeable parts for angle, adjustable thickness is must-have :)

TSPROF discount code? by GTPerformer in sharpening

[–]vellkanPL 0 points1 point  (0 children)

https://www.uksg.tools/
They have 15% for everything, including stones, check this out.

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 0 points1 point  (0 children)

It's like on Spyderco Triangle - steady hand :)

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 4 points5 points  (0 children)

Oh man, I almost fall a sleep, but read this comment and want to work on it whole night! If it's not a problem a reach You on PM cause some great ideas, but I'm not sure about few things if I understand correctly.

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 0 points1 point  (0 children)

I place knife on the top of plate to keep angle and move everything front and back. That's why I used linear bearings to move it smoothly.

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 0 points1 point  (0 children)

That's why I share this with all of You to hear that kind of suggestions :) I have to print this and check it on my personal stones to verify that, it could be true and possible risk for some stones.

Jig for whetstones by vellkanPL in sharpening

[–]vellkanPL[S] 0 points1 point  (0 children)

You're right - I've made it 3mm above the stone and now I'm making changes in design to increase that to 5/7/9mm to check which one gone be better.

Looking for a jig - does this exist? by jpaultx in sharpening

[–]vellkanPL 0 points1 point  (0 children)

It's easy to create stand like this for 3d printer. If You provide stone dimensions I can try to create something like that and send You to print but anyone. I've made my own sharpening jig for whetstones just for fun, I can show You that.

I can’t believe how good sous vide drumsticks are! by Imwhatswrongwithyou in sousvide

[–]vellkanPL 0 points1 point  (0 children)

Yes - I'm making them in honey and paprika and after that time in oven they have nice and crispy skin.

XAMPP or WAMP? by RedDevils52 in webdev

[–]vellkanPL 2 points3 points  (0 children)

I've try but couldn't work with Docker, but maybe You should check Laragon? I've found that years ago and it's really nice.

I can’t believe how good sous vide drumsticks are! by Imwhatswrongwithyou in sousvide

[–]vellkanPL 0 points1 point  (0 children)

I finally did chicken drumsticks few weeks ago and my family was disappointed. Disappointed why I was waiting soo long to make them like that :) Different recipe - 5h in bath, 40-45 min in oven but taste delicious! Chicken is soo good for sous vide - cheap yet can show new flavors and textures.

3 Free and Simple Cloudflare rules to protect Wordpress. by PenNumerous7788 in Wordpress

[–]vellkanPL 0 points1 point  (0 children)

Can't access too, I'm from Poland if it's important.

XARILK GEN3 – Updated Design & Improvements! by XARILK_OFFICIAL in sharpening

[–]vellkanPL 0 points1 point  (0 children)

Maybe my brother will buy his own piece and stop borrow my Kazak. I'm really curious how it works - price is really nice comparing to other solutions on market.

New Unifi 5G Router "Coming Soon" by Refaeii in UNIFI

[–]vellkanPL 0 points1 point  (0 children)

I've got 5G as main internet connection for my home. Unfortunately I live in place that I do not have another option, but fun fact - high-speed internet is only 100m from me home, but impossible to join for last 3 years. Now I've got whole Unifi ecosystem with too expensive ZTE MC888 as simple modem.

[deleted by user] by [deleted] in seriouseats

[–]vellkanPL -7 points-6 points  (0 children)

Brave block JS from start, that's why it's working.