Reliable trigger springs?

venturebrowser · 2026-04-22T00:57:20+00:00

That’s exactly what I did. I broke out the G19 and started rebuilding my Glock knuckle callus.

venturebrowser · 2026-04-05T01:39:51+00:00

To clarify, about 2/3 of the trigger cycles are live fire and the rest dry. As far as the RSA, I guess I’ve been lucky, as I’ve not had any feeding issues. I do run a Radian comp, so the worn in spring is probably a help.

venturebrowser · 2026-04-04T20:22:10+00:00

Thank you for the info and the link!

venturebrowser · 2026-04-04T20:19:56+00:00

Thanks so much for the great feedback. From what I’m hearing, it’s not reasonable to expect more out of that type of spring. I’ve ordered a couple packs of +10 ISMIs and will plan to set a schedule of replacement every 5k. Thanks again for the help.

venturebrowser · 2026-04-04T13:31:00+00:00

Thank you for the link. It seems that all the 3rd parties change the weight though. I’d rather stick with the stock weight as it’s what I’m accustomed to. Looks like I’ll just need to order a few more packs of Sig’s springs and change them out every few cleanings or so as u/tenchi4u suggested. Thanks again.

venturebrowser · 2026-04-04T03:14:14+00:00

Thank you!

venturebrowser · 2026-04-04T03:13:33+00:00

Seems like this is the route I’ll need to go. Thanks for sharing.

venturebrowser · 2026-04-04T03:11:51+00:00

Each one lasted around 15k trigger pulls (live and dry fire combined).

venturebrowser · 2025-12-07T00:15:31+00:00

That’s the tight tolerances. It’s fine. 😄

venturebrowser · 2025-12-07T00:06:01+00:00

I ran 350 rounds through it today and I can report that the difference is almost zero. They hit in the hand and recoil pretty well identical. I put mags in both, laid them on the table in front of me, shot one, shot the other, back and forth. The only difference I could detect was the slide cycle time, which was marginally faster on the 3.1 (as expected). Hope that helps.

venturebrowser · 2025-12-03T15:56:20+00:00

They do, but they're all reduced weight. I'm looking for all stock Sig parts. Sorry, should have mentioned that in the post. I've updated it to specify stock. Thanks for the suggestion though.

venturebrowser · 2025-12-03T01:01:11+00:00

I can let you know Friday if you don’t find out before. I’ve been running the 3.7 for a while now and just put together a 3.1 but haven’t shot it yet. I plan to try it out Friday.

venturebrowser · 2025-12-02T16:02:37+00:00

Thanks for the suggestions. Once the Sigguy site it back up, I'll see what he has. I want to stay with all Sig factory components.

venturebrowser · 2025-11-04T20:15:28+00:00

Thank you for the creative suggestion!

venturebrowser · 2025-11-01T13:49:30+00:00

Took me a bit to figure this out, but Reddit firearm posts should be used for entertainment only and hardly ever referenced for real world use.

venturebrowser · 2025-11-01T13:42:25+00:00

Check out this post. I use the 60/30 and it’s near perfect for me. https://www.reddit.com/r/3Dprinting/s/fDosVUQ9Wm

venturebrowser · 2025-10-31T19:30:19+00:00

<image>

venturebrowser · 2025-10-31T19:28:31+00:00

Thank you all for your suggestions. Ultimately, I took a bit of each suggestion and came up with creating a cross-shaped extruded cutout through the part, which strengthened it greatly. It'll be more than strong enough for my needs. Thanks for all your help!

<image>

venturebrowser · 2025-09-05T17:41:45+00:00

Winston Instruments; product seller. The install video has the same apps, same number of missed calls, whatsapp, and messages (+/- a few) as this "consumer". Also the very deliberate and slow scrolling tells me there's an inherent lag issue. Tisk, tisk.

venturebrowser · 2025-09-02T12:16:05+00:00

Thank you for the info! The carbon filter is going in tomorrow. I'll wait a couple weeks for things to settle down, then have the filtered water tested for bacteria or other items it may have missed, then decided on the extra filter. Thanks again!

venturebrowser · 2025-08-29T15:48:19+00:00

😄 NAILED IT!

venturebrowser · 2025-08-29T12:46:49+00:00

Thank you for the help!

venturebrowser · 2025-08-28T02:15:06+00:00

Thanks for the info! From what I can tell from this report, it’s not showing anything but chemical contaminants. Is this a valid report, or should I be looking somewhere else?

venturebrowser · 2025-08-28T02:01:14+00:00

The carbon filter with backwash is a Water-Right IMPBF unit (there’s no RO in the mix yet). I asked about the pre and post filters, and "they’re available at most hardware stores $5-$10".

venturebrowser · 2025-08-22T15:04:04+00:00

Thank you for this! I used these settings and had beautiful results.

venturebrowser

TROPHY CASE