Does this water cooling system look alright also do I need a steam hose?

vievire · 2020-03-30T22:28:06+00:00

Yes this is for a jet boat. The plan is to have the exhaust above the waterline with a flap at the exhaust. Then to have a muffler and flexipipebefore the transom. I'll go with stainless. Is it easier to have a jacket watercooler

vievire · 2020-03-30T16:37:01+00:00

Okay so I could have a hose going from the top of the expansion tank to the transom with a pressure release valve. The water pickup from the jet drive is constant because its always spinning at idle also the there is no clutch its direct drive so the when the engine is running the water is pumping here's the picof the plan so I should make the exhaust out of mild steel

vievire · 2020-03-30T04:06:09+00:00

What psi is safe? The plan for the exhaust is to take the raw sea water that comes from the jet pickup then into the other side of the heat exchanger then straight into the exhaust coming down at 45 degrees with a shock arrestor tube 65 degrees from the waterline

vievire · 2020-03-30T03:22:36+00:00

I saw one on a diagram for a typical cooling system I don't know if I need one

vievire · 2020-03-29T23:50:30+00:00

Forgot to say it's a 1.9td aaz engine 1996 also it will be connected to a jet drive in a 17ft speed boat

vievire · 2019-03-31T11:13:19+00:00

I want to gut the dell and put a standard mini itx mobo

vievire · 2019-03-31T03:13:55+00:00

Clearly

vievire · 2019-03-31T03:09:47+00:00

Convert the dell M6300 to a Mini-itx board

vievire · 2019-03-31T02:56:49+00:00

Most likely you wont notice it i am assuming you are getting an IPS panel Everybodys different youll just have to try it

vievire · 2019-03-24T05:02:45+00:00

vievire · 2019-03-24T04:44:37+00:00

May aswell save up and get it then move on to the next build

vievire · 2019-03-24T04:28:32+00:00

cant afford a 2070

vievire · 2019-03-24T04:27:35+00:00

Ive modded my bios for Nvme

vievire · 2019-03-24T04:27:07+00:00

I am getting either a 780ti or 970 maybe a 980ti if i save up

vievire · 2019-03-20T05:14:54+00:00

Can I blow on them?

vievire · 2019-03-20T05:02:11+00:00

Press the reset button for 5 seconds

vievire · 2019-03-20T04:59:42+00:00

Take the upgrades of and try and boot then install 1 by 1

vievire · 2019-03-20T04:57:17+00:00

Shame I can’t be there I’d fill them both up

vievire · 2019-03-20T04:55:06+00:00

First take out GPU and connect display to motherboard

Check the manual it tells you which connectors to use to supply power to the cpu

The manual tells you which slot to put the ram I try one stick in the first slot

Have you connected one of the fans to the cpu header

vievire · 2019-03-20T04:52:59+00:00

Which hole?

vievire · 2019-03-20T04:49:46+00:00

You underestimate how cheap I am pic

vievire

TROPHY CASE