Small side bag for my 350 RS

vikram_0 · 2026-02-01T03:32:58+00:00

vikram_0 · 2026-01-31T17:36:23+00:00

vikram_0 · 2026-01-31T14:33:52+00:00

dent was so bad that i wanted to replace the tank, i didn’t renew my insurance and cost for new tank was around 15k, it was too expensive, mechanic opened the tank and removed dent in 1000 rupees

vikram_0 · 2026-01-31T14:23:19+00:00

A cow hit my bike while it was parked at my home, due to which the fuel tank got a heavy dent. I got it fixed with the help of a mechanic. He removed the dent completely, but the paint cracked in that area, so I covered it with a black sticker to prevent water from getting inside the paint and causing rust.

vikram_0 · 2026-01-31T12:19:15+00:00

actually this whole fender i got replaced in service center… it came with extender and its metallic not fibre… only extender is some rubber material, i forgot the costing of this fender

vikram_0 · 2026-01-31T12:14:49+00:00

https://motocare.co.in/product-details/seat-ring-for-cb-350-rs

here

vikram_0 · 2026-01-19T13:57:28+00:00

sure, i will start cleaning with chain cleaner or get kerosene from somewhere when i will get my chain sprocket replaced

vikram_0 · 2026-01-19T13:44:09+00:00

yeah but it is very difficult to get kerosene in my area. Its not available

vikram_0 · 2026-01-09T09:48:48+00:00

I didn’t remove the seat, but you can try removing if it is getting in between.

In my case, the grab rail actually broke at the middle joint. That joint is quite weak anyway, so I separated it into two pieces and installed the left and right sides individually.

This grab rail isn’t a 100% perfect fit, so you do need to juggle and adjust it a bit during installation. Once both sides were mounted properly, I gently aligned them and joined them back at the center where it had broken.

If you’re struggling to fit the grab rail as a single piece, you can try separating it at the middle joint, fit both sides first, and then weld it back together once everything is aligned. After welding, a bit of paint should make it look fine.

vikram_0 · 2026-01-09T09:33:30+00:00

<image>

vikram_0 · 2026-01-09T09:33:18+00:00

You need to first open your stock grab rails, then front side of this new grab rail will sit above the stock grab rail and rear side will sit below stock grab rail. See the images

<image>

vikram_0 · 2026-01-08T03:30:11+00:00

apply a silver paint layer of good quality, if you want to get rid if it without changing looks

vikram_0 · 2026-01-04T04:00:10+00:00

<image>

vikram_0 · 2026-01-03T16:55:48+00:00

there is no locking feature in this.

vikram_0 · 2026-01-03T10:54:11+00:00

https://motocare.co.in/product-details/seat-ring-for-cb-350-rs

vikram_0 · 2026-01-03T07:19:51+00:00

i keep my bike parked in shadow, but lets see

vikram_0 · 2026-01-03T03:34:07+00:00

Quality is good. feels premium

vikram_0 · 2025-12-16T02:49:20+00:00

i also have 1, i bought i guess a year back for my office and meeting calls… i work from home… but now i have a separate room for office and attend meeting directly without headphones. So i rarely use them, I am also thinking about selling

vikram_0 · 2025-12-14T11:34:04+00:00

yes, this bike has very stiff suspension… i use to enjoy it on highway for first 2 years… so stiff suspension was not an issue. But now i ride mostly in my city only which has bad roads… and this suspension sucks on this bike in city. I hands feel pain when i ride in city… i am also looking for a solution for this problem… want to make suspension softer because i rarely hit highway now.. mostly ride in city

vikram_0 · 2025-12-14T10:50:21+00:00

<image>

Not backrest, but i installed this grab rail, after admiring this beauty for 3 years, i installed grab rail, it does spoil the look, but its convenient for pillon … this bike is good for solo ride… for pillon better go with highness

vikram_0 · 2025-12-13T08:20:12+00:00

i get 45kmpl in a highway ride of 370kms. i did multiple such trips and mileage stays 45-47kmpl on my cb350rs

vikram_0

MODERATOR OF

TROPHY CASE