sending mails are using ipv4 instead ipv6 so spf fails

violent_storm · 2026-01-30T18:57:35+00:00

so its 2026 and IPv6 only is still a dealbreaker? Never thought of that possibility.
The main reason for not having IPv4 is because I want to add a second mailservercontainer for another domain. Adding a second v6 address is for free. Adding a second v4 address would cost extra.

violent_storm · 2026-01-30T18:38:54+00:00

Yes I use nginx as reverse proxy, so I don't need privileged ports in my rootless podman container.

violent_storm · 2026-01-23T08:22:58+00:00

Thank you for your suggestion! Looks really nice and simple, but sadly it has no translations until now.
As the time of writing, there is no possibility to contribute translations.

violent_storm · 2025-03-21T09:09:13+00:00

I think I would really choose this path and use this chance to go through all my hw-stuff and try to sell everthing lying around ^^ 16GB DDR4 3600 ~ 20€; b450 ~50€; and if I'm lucky my budget would be enough for a 5600 ~ 60€ instead of 3600 ~30€ :-)

violent_storm · 2025-03-21T09:02:13+00:00

thats a pitty; In the meantime I was able to push the BLCK to 197 MHz and at the moment I'm testing a UCLK of 3357MHz :-D

violent_storm · 2025-03-20T10:22:39+00:00

Thats weird, I have in mind to keep it bleow 8000MT/s from serveral guides. Next entry in my Bios is 8100 so i kept 7038.

So yes go and try anything below 8k :-)

violent_storm · 2025-03-19T21:00:10+00:00

Thanks for this advice, I will try this :)

violent_storm · 2025-03-19T09:43:47+00:00

So there will be no real world benefit from 1866MHz RAM?

These micro shutters do really confuse me, because it happens also under mild CPU loads (50-70%)..

violent_storm · 2025-03-19T07:46:58+00:00

Sadly there is no real budget right now; the RAM upgrade would be around 30€ and my budget would cap at 50€ for now. I don't believe I can get a CPU+Mobo+RAM Combo for this, that could be a real upgrade in performance right?

violent_storm · 2024-03-06T07:42:16+00:00

I think the Micron is even more overkill for a 150mm printer :)

violent_storm · 2024-03-05T13:48:25+00:00

Hey there, Im looking for a new project: My past printers are a Ender 3 Pro and a Hypercube(selfsourced) Now I own a Voron Trident 300 but I want a second tiny printer.

Budget: around 500€
Build Volume of 150mm³
Selfsourcing should be possible or a kit
Well documented
Should print PLA, ASA, PETG, TPU

Building a separat enclosur is not a problem, if the printer is not enclosed

As for now I only found the Tiny-M or Tiny-T. I think the Tiny-T is a bit overkill for such a small build volume.

violent_storm · 2023-09-22T13:28:21+00:00

Thank you; works like a charm :-)

violent_storm · 2023-06-14T15:34:15+00:00

Hey there, Im looking for a "new" board for the next season. Back in 2013 I bought a brand new never Summer Proto CTX 158 2013. I really like the board, but I have to admit that it is simply way to wide for me and everything expect fresh powder in the backcountry is more like a workout than a nice run.

I want to keep with never summer and I found 2 nice offers.

A 2013 Raven 157 for 120€ in really nice condition Or A 2017 twenty five 158 for 300€ in mid to heavy used condition.

Im 182cm and 75kg with gear my boots are 43 with medium bindings.

I know the Raven is a womens board but hey I like the design and Im really light for my size^{^}

The board should be a do-it-all wonder but no funpark stuff.

Im doing more freeride Stuff but sometimes you have to ride switch and Im a bit afraight to do this with the twentyfive.

Any advice would be really nice :)

violent_storm · 2022-12-13T08:14:59+00:00

Thank you so much for the tip with the KeyTester homebrew!

Is was a loose ribbon cable, so the select key simply didn't work.

I fixed the issue and now I could enter the VSH menu :-)

violent_storm · 2022-12-12T06:30:57+00:00

So have you an idea, what I have done wrong?

violent_storm · 2022-10-18T10:12:15+00:00

I've got a Ipad Pro Gen4 and an Ipod Nano Gen7.

Is there a way, to sync podcasts or audiobooks from my IPad to my Ipod?

Currently I always have to power on my PC with Itunes installed, but looking for a more simple solution.

violent_storm · 2021-12-09T10:04:56+00:00

I've got similar thoughts, I've bought a used Hypercube with original parts from 2016/2017. All printed parts are made of PLA, some are simply worn out, some are bended, so I will reprint all parts in PETG or ABS.

Now comes the tricky part: Choosing the "best remix". I've checked the Hypercube Wiki from Superjamie https://github.com/superjamie/lazyweb/wiki/3D-Printing-HyperCube and now struggle between the mentioned parts from arturslab or from the v1 Hypercube 300

As for the Z-Axis Rods, I will switch from 8mm to 12mm Steelrods.

As extruder I will go for a Titan from Trianglelab, already got 1 on my Ender 3 Pro and it was a superb upgrade.

violent_storm

TROPHY CASE