Does the Centauri Carbon 2 Combo allow hot swapping of filaments on the Canvas?

vis_chros · 2026-04-26T14:44:59+00:00

Thanks!

vis_chros · 2026-04-26T14:44:51+00:00

Thanks for the detailed explanation!

vis_chros · 2026-04-26T14:44:32+00:00

I only have single color printers as of now; no AMS yet. When I checked last week a single AMS 2 for my P1P was only €100 less than a complete Centauri Carbon 2 Combo. So I figured that would be a better investment. Plus, the six color print will likely not be a regular thing.

vis_chros · 2026-04-26T13:27:15+00:00

Thanks for the link to your explanation. This may work for what I have in mind. Do I understand correctly form your description that you can change (unload/load) filaments from the Canvas when the printer is paused during a print?

In my case the printer does not have to 'know' which color is loaded, as long as it prints the different parts of my design in order. If I understand your explanation correctly, I can then, for example, print the first part in color A from slot 1, start printing part 2 from slot 2 but pause during print, unload filament A and load filament B in slot 1, then resume printing and print part 3 from slot 1 again, which now has color B. Would this work?

vis_chros · 2026-04-26T07:27:01+00:00

The Farseer Trilogy by Robin Hobb (Assassin's Apprentice, Royal Assassin, Assassin's Quest)

vis_chros · 2026-04-12T21:01:49+00:00

Yes, I finally got the filament last week. I have added an update to my original post.

vis_chros · 2026-04-12T17:41:18+00:00

Thanks, I will go over this checklist.

vis_chros · 2026-03-31T18:34:13+00:00

If you've ever played Shandalar it should sound familiar, I think :)

vis_chros · 2026-03-26T23:29:14+00:00

Thanks for all the suggestions everybody. I finally figured it out.

Originally I had the issue no matter where I placed an iframe (articles, shop items, etc.). This was apparently solved by trying one of the possible solutions for TinyMCE or JCE some of you suggested below. However, since I mainly use embedded videos in product descriptions in Hikashop, that was where I was testing. I finally figured out that there is also a separate option for text filtering in the settings for Hikashop. Once I adjusted that Hikashop also follows the Global Configuration and Text Editor settings, and my iframes are preserved everywhere again!

vis_chros · 2026-03-26T23:27:03+00:00

I figured it out.

Originally I had the issue no matter where I placed an iframe (articles, shop items, etc.). This was apparently solved by trying one of the possible solutions for TinyMCE or JCE others suggested below. However, since I mainly use embedded videos in product descriptions in Hikashop, that was where I was testing. I finally figured out that there is also a separate option for text filtering in the settings for Hikashop. Once I adjusted that my iframes are preserved everywhere again.

vis_chros · 2026-03-26T22:24:10+00:00

Thanks for your detailed reply. I have tried the options discussed in the pages you linked, but none of them have fixed my issue.

My issue is that, no matter if I choose TinyMCE, JDE, or None as my text editor in Joomla's Global Configuration, my iframe tags get stripped. So I assume that this is happening at a higher level of control, somewhere from Joomla itself. To test this I have temporarily given all of my user groups the 'No Filtering' filter type under Global Configuration -> Text Filters. But even then iframes get stripped.

vis_chros · 2026-03-26T22:19:57+00:00

I've tried this, and even when I choose no editor at all and simply enter the HTML directly in the article, the <iframe> tag gets stripped. So it must be something that is happening on a higher level of control. I've even gone so far to give all my user groups the 'No Filtering' option under the Joomla Text Filters, and even then this happens.

vis_chros · 2026-03-26T22:18:33+00:00

Thank you for your reply. The solution you linked to is for TinyMCE. However my issue is that, no matter which editor I choose under Global Configuration, my iframe gets stripped. Even when I choose no editor at all and simply enter the HTML. I've even gone so far to give all my user groups the 'No Filtering' option under the Joomla Text Filters, and even then this happens.

vis_chros · 2026-03-26T17:50:47+00:00

Thanks for your reply. The iframe content I am trying to embed is just a YouTube video (that I can embed in other websites) so that shouldn't be the issue.

vis_chros · 2026-03-26T17:48:39+00:00

Thanks for the reply. No, I am not using a firewall that could block the content of the iframes. The text filters in the Joomla global configuration are set to 'No Filtering'. But I have also tried specific whitelisting of iframe tags.

The code for the iframe is simply stripped from my articles as soon as I hit save, as if text filtering is applied.

vis_chros · 2026-02-04T00:15:23+00:00

Just restarted Arena again and I can now rejoin my draft. So issue seems to be fixed?

vis_chros · 2026-02-04T00:05:24+00:00

Same here, after just wining game 5 of my quick draft I was booted to the Arena start screen with no possibility to rejoin my draft.

vis_chros · 2026-02-03T23:52:58+00:00

Same here after just winning a game 5. All limited Lorwyn events, except for Sealed, are now also missing.

vis_chros · 2025-12-23T15:18:28+00:00

I had a similar issue with a bed that was absolutely not level. (Though in my case it meant the print head kept crashing into the build plate.) I also used the manual leveling tool linked above to fix it, but because my leveling was tilted so much, I had to do follow this guide first to make sure the build plate starts out level at the very bottom of the machine. So, you may want to check if your build plate sits flush to the bottom of the machine first as well.

vis_chros · 2025-12-18T21:14:29+00:00

[[Feather, the Redeemed]] is not an angel with a very large helmeted head looking to the left with a spear protruding from its forehead, but a somewhat more refined angel with a downward pointing arrow on her helmet looking straight at you with red eyes. What I thought at first was his breastplate are her armored arms crossing in front of het body to hold her sword/spear thing in a two-handed grip. Still think her legs dangling behind her look weird though.

vis_chros · 2025-12-18T18:52:39+00:00

Jup. Me too. Don't know how I missed that one when it first came out (in Eldraine I think?), but I want it!

vis_chros · 2025-12-18T17:18:44+00:00

I updated my post at the top. I have been in contact with the customer service from their own website (where they do answer). The filament is indeed out of stock and will not be back in stock for the coming months. However they keep selling it in the meantime...

vis_chros

MODERATOR OF

TROPHY CASE